lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-bindings: usb: cdns,usb3: Add cdns,phyrst-a-enable property
Date
Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.

There is no way to distinguish between the controller version
before the device controller is started so we need to add this
DT property.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index 7bc0263accee..e670adc955e1 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -58,6 +58,10 @@ properties:
buffers expressed in KB
$ref: /schemas/types.yaml#/definitions/uint32

+ cdns,phyrst-a-enable:
+ description: Enable resetting of PHY if Rx fail is detected
+ type: boolean
+
required:
- compatible
- reg
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2020-08-25 14:04    [W:0.886 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site