lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/1] extcon: ptn5150: Add usb-typec support for Intel LGM SoC
From
Date
Hi,

On 8/25/20 5:31 PM, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>
> Add usb-typec detection support for Intel LGM SoC based
> boards.
>
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
> drivers/extcon/extcon-ptn5150.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
> index 8ba706fad887..60355a1b5cb2 100644
> --- a/drivers/extcon/extcon-ptn5150.c
> +++ b/drivers/extcon/extcon-ptn5150.c
> @@ -300,6 +300,8 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
> return ret;
> }
>
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY);

extcon_set_property_capability() just sets the capability
of EXTCON_PROP_USB_TYPEC_POLARITY property.

If you want to set the value (0 or 1) of EXTCON_PROP_USB_TYPEC_POLARITY,
we have to call extcon_set_property() function. But, this patch doesn't
set the any value of EXTCON_PROP_USB_TYPEC_POLARITY property.

Why do you only use extcon_set_property_capability()
without the proper extcon_set_property()?

> /* Initialize PTN5150 device and print vendor id and version id */
> ret = ptn5150_init_dev_type(info);
> if (ret)
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2020-08-25 12:34    [W:0.053 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site