lkml.org 
[lkml]   [2020]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: imx8mm-beacon-baseboard: Correct LED default state
Date
There is no LED default state "none".  leds-gpio driver maps it to
"off", so correct them to fix dtbs_check warnings like:

arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:
leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index baa5f997d018..bf0859f1e1fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -10,19 +10,19 @@
led0 {
label = "gen_led0";
gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};

led1 {
label = "gen_led1";
gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};

led2 {
label = "gen_led2";
gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};

led3 {
--
2.17.1
\
 
 \ /
  Last update: 2020-08-24 09:16    [W:0.034 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site