lkml.org 
[lkml]   [2020]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 16/18] staging/media/tegra-vde: Clean up IOMMU workaround
    From
    Date
    21.08.2020 03:11, Robin Murphy пишет:
    ...
    >> Hello, Robin! Thank you for yours work!
    >>
    >> Some drivers, like this Tegra VDE (Video Decoder Engine) driver for
    >> example, do not want to use implicit IOMMU domain.
    >
    > That isn't (intentionally) changing here - the only difference should be
    > that instead of having the ARM-special implicit domain, which you have
    > to kick out of the way with the ARM-specific API before you're able to
    > attach your own domain, the implicit domain is now a proper IOMMU API
    > default domain, which automatically gets bumped by your attach. The
    > default domains should still only be created in the same cases that the
    > ARM dma_iommu_mappings were.
    >
    >> Tegra VDE driver
    >> relies on explicit IOMMU domain in a case of Tegra SMMU because VDE
    >> hardware can't access last page of the AS and because driver wants to
    >> reserve some fixed addresses [1].
    >>
    >> [1]
    >> https://elixir.bootlin.com/linux/v5.9-rc1/source/drivers/staging/media/tegra-vde/iommu.c#L100
    >>
    >>
    >> Tegra30 SoC supports up to 4 domains, hence it's not possible to afford
    >> wasting unused implicit domains. I think this needs to be addressed
    >> before this patch could be applied.
    >
    > Yeah, there is one subtle change in behaviour from removing the ARM
    > layer on top of the core API, in that the IOMMU driver will no longer
    > see an explicit detach call. Thus it does stand to benefit from being a
    > bit cleverer about noticing devices being moved from one domain to
    > another by an attach call, either by releasing the hardware context for
    > the inactive domain once the device(s) are moved across to the new one,
    > or by simply reprogramming the hardware context in-place for the new
    > domain's address space without allocating a new one at all (most of the
    > drivers that don't have multiple contexts already handle the latter
    > approach quite well).
    >
    >> Would it be possible for IOMMU drivers to gain support for filtering out
    >> devices in iommu_domain_alloc(dev, type)? Then perhaps Tegra SMMU driver
    >> could simply return NULL in a case of type=IOMMU_DOMAIN_DMA and
    >> dev=tegra-vde.
    >
    > If you can implement IOMMU_DOMAIN_IDENTITY by allowing the relevant
    > devices to bypass translation entirely without needing a hardware
    > context (or at worst, can spare one context which all identity-mapped
    > logical domains can share), then you could certainly do that kind of
    > filtering with the .def_domain_type callback if you really wanted to. As
    > above, the intent is that that shouldn't be necessary for this
    > particular case, since only one of a group's default domain and
    > explicitly attached domain can be live at any given time, so the driver
    > should be able to take advantage of that.
    >
    > If you simply have more active devices (groups) than available contexts
    > then yes, you probably would want to do some filtering to decide who
    > deserves a translation domain and who doesn't, but in that case you
    > should already have had a long-standing problem with the ARM implicit
    > domains.
    >
    >> Alternatively, the Tegra SMMU could be changed such that the devices
    >> will be attached to a domain at the time of a first IOMMU mapping
    >> invocation instead of attaching at the time of attach_dev() callback
    >> invocation.
    >>
    >> Or maybe even IOMMU core could be changed to attach devices at the time
    >> of the first IOMMU mapping invocation? This could be a universal
    >> solution for all drivers.
    >
    > I suppose technically you could do that within an IOMMU driver already
    > (similar to how some defer most of setup that logically belongs to
    > ->domain_alloc until the first ->attach_dev). It's a bit grim from the
    > caller's PoV though, in terms of the failure mode being non-obvious and
    > having no real way to recover. Again, you'd be better off simply making
    > decisions up-front at domain_alloc or attach time based on the domain type.

    Robin, thank you very much for the clarifications!

    In accordance to yours comments, this patch can't be applied until Tegra
    SMMU will support IOMMU_DOMAIN_IDENTITY and implement def_domain_type()
    callback that returns IOMMU_DOMAIN_IDENTITY for the VDE device.

    Otherwise you're breaking the VDE driver because
    dma_buf_map_attachment() [1] returns the IOMMU SGT of the implicit
    domain which is then mapped into the VDE's explicit domain [2], and this
    is a nonsense.

    [1]
    https://elixir.bootlin.com/linux/v5.9-rc1/source/drivers/staging/media/tegra-vde/dmabuf-cache.c#L102

    [2]
    https://elixir.bootlin.com/linux/v5.9-rc1/source/drivers/staging/media/tegra-vde/dmabuf-cache.c#L122

    Hence, either VDE driver should bypass iommu_dma_ops from the start or
    it needs a way to kick out the ops, like it does this using ARM's
    arm_iommu_detach_device().


    The same applies to the Tegra GPU devices, otherwise you're breaking
    them as well because Tegra DRM is sensible to implicit vs explicit domain.


    BTW, I tried to apply this series and T30 doesn't boot anymore. I don't
    have more info for now.

    \
     
     \ /
      Last update: 2020-08-23 23:34    [W:3.344 / U:0.552 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site