lkml.org 
[lkml]   [2020]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/7] dt-bindings: PCI: qcom: Add ipq8074 Gen3 PCIe compatible
On 29-07-20, 21:00, Sivaprakash Murugesan wrote:
> ipq8074 has two PCIe ports while the support for Gen2 PCIe port is
> already available add the support for Gen3 binding.
>
> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
> .../devicetree/bindings/pci/qcom,pcie.yaml | 47 ++++++++++++++++++++++

The issue is the yaml file is not in linux-phy next.. did we get the
conversion done?

> 1 file changed, 47 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index 2eef6d5..e0559dd 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -23,6 +23,7 @@ properties:
> - qcom,pcie-ipq8064
> - qcom,pcie-ipq8064-v2
> - qcom,pcie-ipq8074
> + - qcom,pcie-ipq8074-gen3
> - qcom,pcie-msm8996
> - qcom,pcie-qcs404
> - qcom,pcie-sdm845
> @@ -295,6 +296,52 @@ allOf:
> compatible:
> contains:
> enum:
> + - qcom,pcie-ipq8074-gen3
> + then:
> + properties:
> + clocks:
> + items:
> + - description: sys noc interface clock
> + - description: AXI master clock
> + - description: AXI secondary clock
> + - description: AHB clock
> + - description: Auxilary clock
> + - description: AXI secondary bridge clock
> + - description: PCIe rchng clock
> + clock-names:
> + items:
> + - const: iface
> + - const: axi_m
> + - const: axi_s
> + - const: ahb
> + - const: aux
> + - const: axi_bridge
> + - const: rchng
> + resets:
> + items:
> + - description: PIPE reset
> + - description: PCIe sleep reset
> + - description: PCIe sticky reset
> + - description: AXI master reset
> + - description: AXI secondary reset
> + - description: AHB reset
> + - description: AXI master sticky reset
> + - description: AXI secondary sticky reset
> + reset-names:
> + items:
> + - const: pipe
> + - const: sleep
> + - const: sticky
> + - const: axi_m
> + - const: axi_s
> + - const: ahb
> + - const: axi_m_sticky
> + - const: axi_s_sticky
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> - qcom,pcie-msm8996
> then:
> properties:
> --
> 2.7.4

--
~Vinod

\
 
 \ /
  Last update: 2020-08-23 17:33    [W:0.076 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site