lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 04/10] remoteproc: imx_rproc: make syscon optional
On Thu, Aug 20, 2020 at 02:04:10AM +0000, Peng Fan wrote:
> > Subject: Re: [PATCH 04/10] remoteproc: imx_rproc: make syscon optional
> >
> > On Wed, Aug 19, 2020 at 12:51:27AM +0000, Peng Fan wrote:
> > > > Subject: Re: [PATCH 04/10] remoteproc: imx_rproc: make syscon
> > > > optional
> > > >
> > > > Hi Peng,
> > > >
> > > > On Fri, Jul 24, 2020 at 04:08:07PM +0800, Peng Fan wrote:
> > > > > Make syscon optional, since i.MX8QM/QXP/7ULP not have SRC to
> > > > > control
> > > > M4.
> > > > > But currently i.MX8QM/QXP/7ULP not added, so still check regmap
> > > > > when start/stop to avoid unhappy things.
> > > >
> > > > On the i.MX8QM/QXP/7ULP processors, the remote processors are not
> > > > handled by the remoteproc cores, as implemented in this patch. In
> > > > such a scenario how does the remoteproc core know the remote
> > > > processor has crashed and how does it recover from such a condition?
> > >
> > > For 7ULP dual boot case, A7 is under control of M4, so if m4 crash, I
> > > suppose
> > > A7 would not work properly.
> >
> > In that case I assume the whole system gets rebooted, which puts the A7 in a
> > state where it can "attach" with the M4 again.
>
> Yes. Whole system get rebooted.
>
> >
> > >
> > > For 8QM/QXP partition case, M4 is in a standalone partition, if M4
> > > crash or reboot, the system controller unit will restart M4 and notify
> > > Acore that M4 restart.
> >
> > And how does that notification work exactly? Does rproc_report_crash() get
> > called somewhere in that process in order for the remoteproc core to attach
> > to the M4 again?
>
> Yes. We registered a interrupt notification handler with system controller unit.
> When M4 rebooted, the system controller will raise interrupt to A53 core.
> Then the notification callback will be invoked, the callback will call
> rproc_report_crash. I not included this part code in the patchset, since
> this patchset is to add initial support for 8M case.

All this information is really appreciated.

>
> Thanks,
> Peng.
>
> >
> > Many thanks for the help,
> > Mathieu
> >
> > >
> > > Thanks,
> > > Peng.
> > >
> > > >
> > > > Thanks,
> > > > Mathieu
> > > >
> > > > >
> > > > > Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > > > > ---
> > > > > drivers/remoteproc/imx_rproc.c | 11 +++++++++--
> > > > > 1 file changed, 9 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/remoteproc/imx_rproc.c
> > > > > b/drivers/remoteproc/imx_rproc.c index 82594a800a1b..4fad5c0b1c05
> > > > > 100644
> > > > > --- a/drivers/remoteproc/imx_rproc.c
> > > > > +++ b/drivers/remoteproc/imx_rproc.c
> > > > > @@ -162,6 +162,9 @@ static int imx_rproc_start(struct rproc *rproc)
> > > > > struct device *dev = priv->dev;
> > > > > int ret;
> > > > >
> > > > > + if (!priv->regmap)
> > > > > + return -EOPNOTSUPP;
> > > > > +
> > > > > ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> > > > > dcfg->src_mask, dcfg->src_start);
> > > > > if (ret)
> > > > > @@ -177,6 +180,9 @@ static int imx_rproc_stop(struct rproc *rproc)
> > > > > struct device *dev = priv->dev;
> > > > > int ret;
> > > > >
> > > > > + if (!priv->regmap)
> > > > > + return -EOPNOTSUPP;
> > > > > +
> > > > > ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> > > > > dcfg->src_mask, dcfg->src_stop);
> > > > > if (ret)
> > > > > @@ -325,9 +331,10 @@ static int imx_rproc_probe(struct
> > > > > platform_device
> > > > *pdev)
> > > > > regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> > > > > if (IS_ERR(regmap)) {
> > > > > dev_err(dev, "failed to find syscon\n");
> > > > > - return PTR_ERR(regmap);
> > > > > + regmap = NULL;
> > > > > + } else {
> > > > > + regmap_attach_dev(dev, regmap, &config);
> > > > > }
> > > > > - regmap_attach_dev(dev, regmap, &config);
> > > > >
> > > > > /* set some other name then imx */
> > > > > rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
> > > > > --
> > > > > 2.16.4
> > > > >

\
 
 \ /
  Last update: 2020-08-20 21:29    [W:0.217 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site