lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/12] staging: wfx: add workaround for 'timeout while wake up chip'
Date
From: Jérôme Pouiller <jerome.pouiller@silabs.com>

The host and the device can be connected with a called Wake-Up GPIO.
When the host fall down this GPIO, it allows the device to enter in deep
sleep and no communication with the device is no more possible (the
device wakes up automatically on DTIM and fetch data if necessary).

So, before to communicate with the device, the driver have to raise the
Wake-up GPIO and then wait for an IRQ from the device.

Unfortunately, old firmwares have a race in sleep/wake-up process and
the device may never wake up. In this case, the IRQ is not sent and
driver complains with "timeout while wake up chip". Then, the driver
tries anyway to access the bus and an other error is raised by the bus.

Fortunately, when the bug occurs, it is possible to fall down the IRQ
and the device will eventually finish the sleep process. Then the driver
can wake it up normally.

The patch implements that workaround and add a retry limit in case
something goes very wrong.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
drivers/staging/wfx/bh.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c
index 07304a80c29b..f07bcee50e3f 100644
--- a/drivers/staging/wfx/bh.c
+++ b/drivers/staging/wfx/bh.c
@@ -18,25 +18,40 @@

static void device_wakeup(struct wfx_dev *wdev)
{
+ int max_retry = 3;
+
if (!wdev->pdata.gpio_wakeup)
return;
if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup))
return;

- gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
if (wfx_api_older_than(wdev, 1, 4)) {
+ gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
if (!completion_done(&wdev->hif.ctrl_ready))
usleep_range(2000, 2500);
- } else {
+ return;
+ }
+ for (;;) {
+ gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
// completion.h does not provide any function to wait
// completion without consume it (a kind of
// wait_for_completion_done_timeout()). So we have to emulate
// it.
if (wait_for_completion_timeout(&wdev->hif.ctrl_ready,
- msecs_to_jiffies(2)))
+ msecs_to_jiffies(2))) {
complete(&wdev->hif.ctrl_ready);
- else
+ return;
+ } else if (max_retry-- > 0) {
+ // Older firmwares have a race in sleep/wake-up process.
+ // Redo the process is sufficient to unfreeze the
+ // chip.
dev_err(wdev->dev, "timeout while wake up chip\n");
+ gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 0);
+ usleep_range(2000, 2500);
+ } else {
+ dev_err(wdev->dev, "max wake-up retries reached\n");
+ return;
+ }
}
}

--
2.28.0
\
 
 \ /
  Last update: 2020-08-20 18:03    [W:0.092 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site