lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] mfd: Add ACPI support to Kontron PLD driver
Date
Recent Kontron COMe modules identify the PLD device using the hardware
id KEM0001 in the ACPI table.
This patch adds support for probing the device using the HID and also
retrieving the resources.

As this is not available for all products, the DMI based detection still
needs to be around for older systems. It is executed if no matching ACPI
HID is found during registering the platform driver or no specific
device id is forced.
If a device is detected using ACPI and no resource information is
available, the default io resource is used.

Forcing a device id with the force_device_id parameter and therefore
manually generating a platform device takes precedence over ACPI during
probing.

v2: - Implemented code changes suggested by Lee Jones
- Added comments explaining some critical code
- Driver is no longer unregistered if probing is skipped during
platform_driver_register and device is not found in DMI table
- Set probe type to PROBE_FORCE_SYNCHRONOUS to make clear this is
the expected behaviour for this code to work as expected

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
---
drivers/mfd/kempld-core.c | 115 ++++++++++++++++++++++++++++++++++++--
1 file changed, 109 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index f48e21d8b97c..0bb6d621112c 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -13,6 +13,7 @@
#include <linux/dmi.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/acpi.h>

#define MAX_ID_LEN 4
static char force_device_id[MAX_ID_LEN + 1] = "";
@@ -132,6 +133,7 @@ static const struct kempld_platform_data kempld_platform_data_generic = {
};

static struct platform_device *kempld_pdev;
+static bool kempld_acpi_mode;

static int kempld_create_platform_device(const struct dmi_system_id *id)
{
@@ -434,13 +436,93 @@ static int kempld_detect_device(struct kempld_device_data *pld)
return ret;
}

+#ifdef CONFIG_ACPI
+static int kempld_get_acpi_data(struct platform_device *pdev)
+{
+ struct list_head resource_list;
+ struct resource *resources;
+ struct resource_entry *rentry;
+ struct device *dev = &pdev->dev;
+ struct acpi_device *acpi_dev = ACPI_COMPANION(dev);
+ const struct kempld_platform_data *pdata;
+ int ret;
+ int count;
+
+ pdata = acpi_device_get_match_data(dev);
+ ret = platform_device_add_data(pdev, pdata,
+ sizeof(struct kempld_platform_data));
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL);
+ if (ret < 0)
+ goto out;
+
+ count = ret;
+
+ if (count == 0) {
+ ret = platform_device_add_resources(pdev, pdata->ioresource, 1);
+ goto out;
+ }
+
+ resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources),
+ GFP_KERNEL);
+ if (!resources) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ count = 0;
+ list_for_each_entry(rentry, &resource_list, node) {
+ memcpy(&resources[count], rentry->res,
+ sizeof(*resources));
+ count++;
+ }
+ ret = platform_device_add_resources(pdev, resources, count);
+
+out:
+ acpi_dev_free_resource_list(&resource_list);
+
+ return ret;
+}
+#else
+static int kempld_get_acpi_data(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_ACPI */
+
static int kempld_probe(struct platform_device *pdev)
{
- const struct kempld_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
+ const struct kempld_platform_data *pdata;
struct device *dev = &pdev->dev;
struct kempld_device_data *pld;
struct resource *ioport;
+ int ret;
+
+ if (kempld_pdev == NULL) {
+ /*
+ * No kempld_pdev device has been registered in kempld_init,
+ * so we seem to be probing an ACPI platform device.
+ */
+ ret = kempld_get_acpi_data(pdev);
+ if (ret)
+ return ret;
+
+ kempld_acpi_mode = true;
+ } else if (kempld_pdev != pdev) {
+ /*
+ * The platform device we are probing is not the one we
+ * registered in kempld_init using the DMI table, so this one
+ * comes from ACPI.
+ * As we can only probe one - abort here and use the DMI
+ * based one instead.
+ */
+ dev_notice(dev, "platform device exists - not using ACPI\n");
+ return -ENODEV;
+ }
+ pdata = dev_get_platdata(dev);

pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL);
if (!pld)
@@ -479,9 +561,17 @@ static int kempld_remove(struct platform_device *pdev)
return 0;
}

+static const struct acpi_device_id kempld_acpi_table[] = {
+ { "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, kempld_acpi_table);
+
static struct platform_driver kempld_driver = {
.driver = {
.name = "kempld",
+ .acpi_match_table = ACPI_PTR(kempld_acpi_table),
+ .probe_type = PROBE_FORCE_SYNCHRONOUS,
},
.probe = kempld_probe,
.remove = kempld_remove,
@@ -800,6 +890,7 @@ MODULE_DEVICE_TABLE(dmi, kempld_dmi_table);
static int __init kempld_init(void)
{
const struct dmi_system_id *id;
+ int ret;

if (force_device_id[0]) {
for (id = kempld_dmi_table;
@@ -809,12 +900,24 @@ static int __init kempld_init(void)
break;
if (id->matches[0].slot == DMI_NONE)
return -ENODEV;
- } else {
- if (!dmi_check_system(kempld_dmi_table))
- return -ENODEV;
}

- return platform_driver_register(&kempld_driver);
+ ret = platform_driver_register(&kempld_driver);
+ if (ret)
+ return ret;
+
+ /*
+ * With synchronous probing the device should already be probed now.
+ * If no device id is forced and also no ACPI definition for the
+ * device was found, scan DMI table as fallback.
+ *
+ * If drivers_autoprobing is disabled and the device is found here,
+ * only that device can be bound manually later.
+ */
+ if (!kempld_pdev && !kempld_acpi_mode)
+ dmi_check_system(kempld_dmi_table);
+
+ return 0;
}

static void __exit kempld_exit(void)
--
2.25.1

\
 
 \ /
  Last update: 2020-08-20 17:41    [W:0.083 / U:4.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site