lkml.org 
[lkml]   [2020]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/6] Add TI PRUSS platform driver
On Sun 2020-08-02 13:53:30, Pavel Machek wrote:
> Hi!
>
> > A typical usage scenario would be to load the application firmware into one or
> > more of the PRU cores, initialize one or more of the peripherals and perform I/O
> > through shared RAM from either a kernel driver or directly from userspace.
> >
> > This series contains the PRUSS platform driver. This is the parent driver for
> > the entire PRUSS and is used for managing the subsystem level resources like
> > various memories and the CFG module. It is responsible for the creation and
> > deletion of the platform devices for the child PRU devices and other child
> > devices (like Interrupt Controller, MDIO node and some syscon nodes) so that
> > they can be managed by specific platform drivers.
>
> > drivers/soc/ti/Kconfig | 11 + drivers/soc/ti/Makefile | 1 + drivers/soc/ti/pruss.c |
>
> Is drivers/soc right place for that? We already have subsystem for various
> programmable accelerators...

....see drivers/remoteproc.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

\
 
 \ /
  Last update: 2020-08-02 13:57    [W:0.098 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site