lkml.org 
[lkml]   [2020]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] cper,edac,efi: Memory Error Record: bank group/address and chip id
Date
Updates to the UEFI 2.8 Memory Error Record allow splitting the bank field
into bank address and bank group, and using the last 3 bits of the extended
field as a chip identifier.

When needed, print correct version of bank field, bank group, and chip
identification

Based on UEFI 2.8 Table 299. Memory Error Record

Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Signed-off-by: Alex Kluver <alex.kluver@hpe.com>
---

v1 -> v2:
* Add static inline cper_get_mem_extension() to make it
more readable, as suggested by Borislav Petkov.

* Add second patch for bank field, bank group, and chip id.

---
drivers/edac/ghes_edac.c | 9 +++++++++
drivers/firmware/efi/cper.c | 9 +++++++++
include/linux/cper.h | 8 ++++++++
3 files changed, 26 insertions(+)

diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 98fcdaf72a09..31eb72b67265 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -337,6 +337,12 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
p += sprintf(p, "rank:%d ", mem_err->rank);
if (mem_err->validation_bits & CPER_MEM_VALID_BANK)
p += sprintf(p, "bank:%d ", mem_err->bank);
+ if (mem_err->validation_bits & CPER_MEM_VALID_BANK_GROUP)
+ p += sprintf(p, "bank_group:%d ",
+ mem_err->bank >> CPER_MEM_BANK_GROUP_SHIFT);
+ if (mem_err->validation_bits & CPER_MEM_VALID_BANK_ADDRESS)
+ p += sprintf(p, "bank_address:%d ",
+ mem_err->bank & CPER_MEM_BANK_ADDRESS_MASK);
if (mem_err->validation_bits & (CPER_MEM_VALID_ROW | CPER_MEM_VALID_ROW_EXT)) {
u32 row = mem_err->row;

@@ -362,6 +368,9 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
if (index >= 0)
e->top_layer = index;
}
+ if (mem_err->validation_bits & CPER_MEM_VALID_CHIP_ID)
+ p += sprintf(p, "chipID: %d ",
+ mem_err->extended >> CPER_MEM_CHIP_ID_SHIFT);
if (p > e->location)
*(p - 1) = '\0';

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index a60acd17bcaa..e15d484b6a5a 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -232,6 +232,12 @@ static int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
n += scnprintf(msg + n, len - n, "rank: %d ", mem->rank);
if (mem->validation_bits & CPER_MEM_VALID_BANK)
n += scnprintf(msg + n, len - n, "bank: %d ", mem->bank);
+ if (mem->validation_bits & CPER_MEM_VALID_BANK_GROUP)
+ n += scnprintf(msg + n, len - n, "bank_group: %d ",
+ mem->bank >> CPER_MEM_BANK_GROUP_SHIFT);
+ if (mem->validation_bits & CPER_MEM_VALID_BANK_ADDRESS)
+ n += scnprintf(msg + n, len - n, "bank_address: %d ",
+ mem->bank & CPER_MEM_BANK_ADDRESS_MASK);
if (mem->validation_bits & CPER_MEM_VALID_DEVICE)
n += scnprintf(msg + n, len - n, "device: %d ", mem->device);
if (mem->validation_bits & (CPER_MEM_VALID_ROW | CPER_MEM_VALID_ROW_EXT)) {
@@ -254,6 +260,9 @@ static int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
if (mem->validation_bits & CPER_MEM_VALID_TARGET_ID)
scnprintf(msg + n, len - n, "target_id: 0x%016llx ",
mem->target_id);
+ if (mem->validation_bits & CPER_MEM_VALID_CHIP_ID)
+ scnprintf(msg + n, len - n, "chip_id: %d ",
+ mem->extended >> CPER_MEM_CHIP_ID_SHIFT);

msg[n] = '\0';
return n;
diff --git a/include/linux/cper.h b/include/linux/cper.h
index bd2d8a77a784..6a511a1078ca 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -231,10 +231,18 @@ enum {
#define CPER_MEM_VALID_CARD_HANDLE 0x10000
#define CPER_MEM_VALID_MODULE_HANDLE 0x20000
#define CPER_MEM_VALID_ROW_EXT 0x40000
+#define CPER_MEM_VALID_BANK_GROUP 0x80000
+#define CPER_MEM_VALID_BANK_ADDRESS 0x100000
+#define CPER_MEM_VALID_CHIP_ID 0x200000

#define CPER_MEM_EXT_ROW_MASK 0x3
#define CPER_MEM_EXT_ROW_SHIFT 16

+#define CPER_MEM_BANK_ADDRESS_MASK 0xff
+#define CPER_MEM_BANK_GROUP_SHIFT 8
+
+#define CPER_MEM_CHIP_ID_SHIFT 5
+
#define CPER_PCIE_VALID_PORT_TYPE 0x0001
#define CPER_PCIE_VALID_VERSION 0x0002
#define CPER_PCIE_VALID_COMMAND_STATUS 0x0004
--
2.26.2
\
 
 \ /
  Last update: 2020-08-19 16:37    [W:0.207 / U:3.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site