lkml.org 
[lkml]   [2020]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
On Tue, Aug 18, 2020 at 11:03:51AM +0800, EastL Lee wrote:
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6779 SoC or other similar Mediatek SoCs.
>
> Signed-off-by: EastL Lee <EastL.Lee@mediatek.com>
> ---
> .../devicetree/bindings/dma/mtk-cqdma.yaml | 98 ++++++++++++++++++++++
> 1 file changed, 98 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> new file mode 100644
> index 0000000..fe03081
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Command-Queue DMA controller Device Tree Binding
> +
> +maintainers:
> + - EastL Lee <EastL.Lee@mediatek.com>
> +
> +description:
> + MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
> + is dedicated to memory-to-memory transfer through queue based
> + descriptor management.
> +
> +allOf:
> + - $ref: "dma-controller.yaml#"
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: mediatek,mt6765-cqdma
> + - const: mediatek,mt6779-cqdma

Use enum instead of oneOf+const.

> +
> + reg:
> + minItems: 1
> + maxItems: 5
> + description:
> + A base address of MediaTek Command-Queue DMA controller,
> + a channel will have a set of base address.
> +
> + interrupts:
> + minItems: 1
> + maxItems: 5
> + description:
> + A interrupt number of MediaTek Command-Queue DMA controller,
> + one interrupt number per dma-channels.
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: cqdma
> +
> + dma-channels:
> + $ref: /schemas/types.yaml#definitions/uint32

Common properties already have a type definition.

> + description:
> + Number of DMA channels supported by MediaTek Command-Queue DMA
> + controller, support up to five.
> + items:

Not an array, so drop 'items'.

> + minimum: 1
> + maximum: 5
> +
> + dma-requests:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + Number of DMA request (virtual channel) supported by MediaTek
> + Command-Queue DMA controller, support up to 32.
> + items:
> + minimum: 1
> + maximum: 32

Same issues here.

> +
> +required:
> + - "#dma-cells"
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - dma-channel-mask

Need to list in properties to fix the check error:

dma-channel-mask: true

> + - dma-channels
> + - dma-requests
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/mt6779-clk.h>
> + cqdma: dma-controller@10212000 {
> + compatible = "mediatek,mt6779-cqdma";
> + reg = <0x10212000 0x80>,
> + <0x10212080 0x80>,
> + <0x10212100 0x80>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
> + clock-names = "cqdma";
> + dma-channel-mask = <0x3f>;
> + dma-channels = <3>;
> + dma-requests = <32>;
> + #dma-cells = <1>;
> + };
> +
> +...
> --
> 1.9.1

\
 
 \ /
  Last update: 2020-08-18 18:48    [W:0.078 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site