Messages in this thread | | | From | Dong Aisheng <> | Date | Tue, 18 Aug 2020 19:34:14 +0800 | Subject | Re: [PATCH v2 16/17] arm64: dts: imx8mp: Add media_blk_ctrl node |
| |
On Fri, Aug 14, 2020 at 8:12 PM Abel Vesa <abel.vesa@nxp.com> wrote: > > Some of the features of the media_ctrl will be used by some > different drivers in a way those drivers will know best, so adding the > syscon compatible we allow those to do just that. Only the resets > and the clocks are registered bit the clk-blk-ctrl driver. > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index dede0ae..2d6d213 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -736,6 +736,22 @@ > }; > }; > > + aips4: bus@32c00000 { > + compatible = "simple-bus"; > + reg = <0x32c00000 0x400000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + media_blk_ctrl: clock-controller@32ec0000 {
For this combo device, maybe we can directly name it as blk-ctrl@32ec0000. Rob, do you think if we can do that?
> + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; > + reg = <0x32ec0000 0x10000>; > +
Remove unnecessary blank line
Otherwise: Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Regards Aisheng
> + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + }; > + > aips5: bus@30c00000 { > compatible = "fsl,aips-bus", "simple-bus"; > reg = <0x30c00000 0x400000>; > -- > 2.7.4 >
| |