lkml.org 
[lkml]   [2020]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND PATCH] media: camss: vfe: Use trace_printk for debugging only
On Fri, Jul 10, 2020 at 2:48 PM Nicolas Boichat <drinkcat@chromium.org> wrote:
>
> trace_printk should not be used in production code. Since
> tracing interrupts is presumably latency sensitive, pr_dbg is
> not appropriate, so guard the call with a preprocessor symbol
> that can be defined for debugging purpose.
>
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> Sent this before as part of a series (whose 4th patch was a
> change that allows to detect such trace_printk), but maybe it's
> easier to get individual maintainer attention by splitting it.

Mauro, can I get your attention on this patch? This still applies on
the latest 5.9-rc1/linux-next.

Thanks!


>
> drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 2 ++
> drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> index 174a36be6f5d866..0c57171fae4f9e9 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> @@ -936,8 +936,10 @@ static irqreturn_t vfe_isr(int irq, void *dev)
>
> vfe->ops->isr_read(vfe, &value0, &value1);
>
> +#ifdef CAMSS_VFE_TRACE_IRQ
> trace_printk("VFE: status0 = 0x%08x, status1 = 0x%08x\n",
> value0, value1);
> +#endif
>
> if (value0 & VFE_0_IRQ_STATUS_0_RESET_ACK)
> vfe->isr_ops.reset_ack(vfe);
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> index 0dca8bf9281e774..307675925e5c779 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> @@ -1058,8 +1058,10 @@ static irqreturn_t vfe_isr(int irq, void *dev)
>
> vfe->ops->isr_read(vfe, &value0, &value1);
>
> +#ifdef CAMSS_VFE_TRACE_IRQ
> trace_printk("VFE: status0 = 0x%08x, status1 = 0x%08x\n",
> value0, value1);
> +#endif
>
> if (value0 & VFE_0_IRQ_STATUS_0_RESET_ACK)
> vfe->isr_ops.reset_ack(vfe);
> --
> 2.27.0.383.g050319c2ae-goog
>

\
 
 \ /
  Last update: 2020-08-18 10:20    [W:0.041 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site