lkml.org 
[lkml]   [2020]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v6 5/8] drivers: thermal: tsens: Fix wrong get_temp for msm8960
Date
msm8960 based tsens have an hardcoded slope. Fix the calibrate function
with the new added slope, change code_to_mdegC to use slope and conver
get_temp to use reg_field.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/thermal/qcom/tsens-8960.c | 43 +++++++++++++++++++++++--------
1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 93d2c6c7d1bd..ca83c7f838a5 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -67,6 +67,14 @@
#define S9_STATUS_OFF 0x3674
#define S10_STATUS_OFF 0x3678

+#define TSENS_FACTOR 1
+
+u32 tsens_msm8960_slope[] = {
+ 1176, 1176, 1154, 1176,
+ 1111, 1132, 1132, 1199,
+ 1132, 1199, 1132
+ };
+
static int suspend_8960(struct tsens_priv *priv)
{
int ret;
@@ -187,8 +195,10 @@ static int calibrate_8960(struct tsens_priv *priv)
if (IS_ERR(data))
return PTR_ERR(data);

- for (i = 0; i < num_read; i++, s++)
- s->offset = data[i];
+ for (i = 0; i < num_read; i++, s++) {
+ s->slope = tsens_msm8960_slope[i];
+ s->offset = CAL_MDEGC - (data[i] * s->slope);
+ }

kfree(data);

@@ -198,32 +208,43 @@ static int calibrate_8960(struct tsens_priv *priv)
/* Temperature on y axis and ADC-code on x-axis */
static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
{
- int slope, offset;
+ int num, degc;
+
+ num = (adc_code * s->slope) + s->offset;

- slope = thermal_zone_get_slope(s->tzd);
- offset = CAL_MDEGC - slope * s->offset;
+ if (num == 0)
+ degc = num;
+ else if (num > 0)
+ degc = (num + TSENS_FACTOR / 2)
+ / TSENS_FACTOR;
+ else
+ degc = (num - TSENS_FACTOR / 2)
+ / TSENS_FACTOR;

- return adc_code * slope + offset;
+ return degc;
}

static int get_temp_8960(const struct tsens_sensor *s, int *temp)
{
int ret;
- u32 code, trdy;
+ u32 last_temp = 0, trdy;
struct tsens_priv *priv = s->priv;
unsigned long timeout;

timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
do {
- ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
+ ret = regmap_field_read(priv->rf[TRDY], &trdy);
if (ret)
return ret;
- if (!(trdy & TRDY_MASK))
+ if (!trdy)
continue;
- ret = regmap_read(priv->tm_map, s->status, &code);
+
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
if (ret)
return ret;
- *temp = code_to_mdegC(code, s);
+
+ *temp = code_to_mdegC(last_temp, s);
+
return 0;
} while (time_before(jiffies, timeout));

--
2.27.0
\
 
 \ /
  Last update: 2020-08-14 15:43    [W:0.133 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site