lkml.org 
[lkml]   [2020]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] powerpc: Rewrite FSL_BOOKE flush_cache_instruction() in C
Date
Nothing prevents flush_cache_instruction() from being writen in C.

Do it to improve readability and maintainability.

This function is only use by low level callers, it is not
intended to be used by module. Don't export it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/misc_32.S | 22 ----------------------
arch/powerpc/mm/nohash/fsl_booke.c | 16 ++++++++++++++++
2 files changed, 16 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 1bda207459a8..87717966f5cd 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -268,28 +268,6 @@ _ASM_NOKPROBE_SYMBOL(real_writeb)

#endif /* CONFIG_40x */

-
-/*
- * Flush instruction cache.
- */
-#ifdef CONFIG_FSL_BOOKE
-_GLOBAL(flush_instruction_cache)
-#ifdef CONFIG_E200
- mfspr r3,SPRN_L1CSR0
- ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC
- /* msync; isync recommended here */
- mtspr SPRN_L1CSR0,r3
- isync
- blr
-#endif
- mfspr r3,SPRN_L1CSR1
- ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
- mtspr SPRN_L1CSR1,r3
- isync
- blr
-EXPORT_SYMBOL(flush_instruction_cache)
-#endif
-
/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
diff --git a/arch/powerpc/mm/nohash/fsl_booke.c b/arch/powerpc/mm/nohash/fsl_booke.c
index 0c294827d6e5..36bda962d3b3 100644
--- a/arch/powerpc/mm/nohash/fsl_booke.c
+++ b/arch/powerpc/mm/nohash/fsl_booke.c
@@ -219,6 +219,22 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
}

+void flush_instruction_cache(void)
+{
+ unsigned long tmp;
+
+ if (IS_ENABLED(CONFIG_E200)) {
+ tmp = mfspr(SPRN_L1CSR0);
+ tmp |= L1CSR0_CFI | L1CSR0_CLFC;
+ mtspr(SPRN_L1CSR0, tmp);
+ } else {
+ tmp = mfspr(SPRN_L1CSR1);
+ tmp |= L1CSR1_ICFI | L1CSR1_ICLFR;
+ mtspr(SPRN_L1CSR1, tmp);
+ }
+ isync();
+}
+
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
--
2.25.0
\
 
 \ /
  Last update: 2020-08-14 07:56    [W:1.207 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site