lkml.org 
[lkml]   [2020]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 02/18] gpio: uapi: define uAPI v2
On Sun, Aug 9, 2020 at 3:26 PM Kent Gibson <warthog618@gmail.com> wrote:
>
> Add a new version of the uAPI to address existing 32/64-bit alignment
> issues, add support for debounce and event sequence numbers, allow
> requested lines with different configurations, and provide some future
> proofing by adding padding reserved for future use.
>
> The alignment issue relates to the gpioevent_data, which packs to different
> sizes on 32-bit and 64-bit platforms. That creates problems for 32-bit apps
> running on 64-bit kernels. uAPI v2 addresses that particular issue, and
> the problem more generally, by adding pad fields that explicitly pad
> structs out to 64-bit boundaries, so they will pack to the same size now,
> and even if some of the reserved padding is used for __u64 fields in the
> future.
>
> The new structs have been analysed with pahole to ensure that they
> are sized as expected and contain no implicit padding.
>
> The lack of future proofing in v1 makes it impossible to, for example,
> add the debounce feature that is included in v2.
> The future proofing is addressed by providing configurable attributes in
> line config and reserved padding in all structs for future features.
> Specifically, the line request, config, info, info_changed and event
> structs receive updated versions and new ioctls.
>
> As the majority of the structs and ioctls were being replaced, it is
> opportune to rework some of the other aspects of the uAPI:
>
> v1 has three different flags fields, each with their own separate
> bit definitions. In v2 that is collapsed to one - gpio_v2_line_flag.
>
> The handle and event requests are merged into a single request, the line
> request, as the two requests were mostly the same other than the edge
> detection provided by event requests. As a byproduct, the v2 uAPI allows
> for multiple lines producing edge events on the same line handle.
> This is a new capability as v1 only supports a single line in an event
> request.
>
> As a consequence, there are now only two types of file handle to be
> concerned with, the chip and the line, and it is clearer which ioctls
> apply to which type of handle.
>
> There is also some minor renaming of fields for consistency compared to
> their v1 counterparts, e.g. offset rather than lineoffset or line_offset,
> and consumer rather than consumer_label.
>
> Additionally, v1 GPIOHANDLES_MAX becomes GPIO_V2_LINES_MAX in v2 for
> clarity, and the gpiohandle_data __u8 array becomes a bitmap in
> gpio_v2_line_values.
>
> The v2 uAPI is mostly a reorganisation and extension of v1, so userspace
> code, particularly libgpiod, should readily port to it.
>
> Signed-off-by: Kent Gibson <warthog618@gmail.com>
> ---

This now looks good for me. Just a small nit below.

Andy: would you mind taking a look as well?

>
> +/*
> + * Maximum number of requested lines.
> + *
> + * Must be no greater than 64 as bitmaps are limited to 64-bits, and a
> + * multiple of 2 to ensure 32/64-bit alignment of structs.
> + */
> +#define GPIO_V2_LINES_MAX 64
> +

If we refer to bitmaps for which helpers are defined in
include/linux/bitmap.h then they're not limited to 64-bits. I'd just
say here that we want to fit into 64-bit integers for simplicity.

[snip]

Bartosz

\
 
 \ /
  Last update: 2020-08-11 21:12    [W:1.656 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site