lkml.org 
[lkml]   [2020]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] HID: i2c-hid: Add 60ms delay after SET_POWER ON
From
Date
Hi Hans,

> On Aug 11, 2020, at 00:13, Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> On 10-08-2020 16:29, Kai-Heng Feng wrote:
>> Goodix touchpad fails to operate in I2C mode after system suspend.
>> According to the vendor, Windows is more forgiving and there's a 60ms
>> delay after SET_POWER ON command.
>> So let's do the same here, to workaround for the touchpads that depend
>> on the delay.
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>
> Interesting I send a very similar patch a couple of days ago,
> after debugging some touchpads issues on a BMAX Y13 laptop:
>
> https://patchwork.kernel.org/patch/11701541/
>
> If you look at that patch you will see that if we add a
> sleep on power-on to i2c_hid_set_power(), we can remove
> an existing sleep after power-on from i2c_hid_hwreset().
>
> And there is an interesting comment there which should
> probably be moved (as my patch does) and corrected for the
> new knowledge so that people reading the code in the future
> now why the sleep is there.

Thanks for the info.
Can you please update your patch with 60ms to supersede mine?

>
> Other then that we've come to the same conclusion, but
> your sleep is much longer. I guess that is ok though,
> are you sure we need 60ms as a minimum?
> Is that what goodix
> said?

Yes, I was told by Goodix that the 60ms delay is needed.

Kai-Heng

>
> Regards,
>
> Hans
>
>
>> ---
>> drivers/hid/i2c-hid/i2c-hid-core.c | 3 +++
>> 1 file changed, 3 insertions(+)
>> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
>> index 294c84e136d7..7b24a27fad95 100644
>> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
>> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
>> @@ -419,6 +419,9 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
>> if (ret)
>> dev_err(&client->dev, "failed to change power setting.\n");
>> + if (!ret && power_state == I2C_HID_PWR_ON)
>> + msleep(60);
>> +
>> set_pwr_exit:
>> return ret;
>> }
>

\
 
 \ /
  Last update: 2020-08-11 08:00    [W:0.333 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site