lkml.org 
[lkml]   [2020]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlockdep splat ("possible circular locking dependency detected") with PL011 on 5.8
Hi,

Using magic-sysrq via a keyboard interrupt over the serial console results in
the following lockdep splat with the PL011 UART driver on v5.8. I can reproduce
the issue under QEMU with arm64 defconfig + PROVE_LOCKING.

Any chance somebody could take a look, please? It's a little annoying,
because it means when I uses magic-sysrq to increase the loglevel prior
to testing something else, lockdep gets disabled as a result.

Cheers,

Will

--->8

[ 56.377562] sysrq: Changing Loglevel
[ 56.385777] sysrq: Loglevel set to 9
[ 56.387291]
[ 56.387378] ======================================================
[ 56.387391] WARNING: possible circular locking dependency detected
[ 56.387401] 5.8.0 #2 Not tainted
[ 56.387411] ------------------------------------------------------
[ 56.387421] swapper/0/0 is trying to acquire lock:
[ 56.387467] ffffb190db294ab0 (console_owner){-.-.}-{0:0}, at: console_lock_spinning_enable+0x34/0x70
[ 56.387525]
[ 56.387535] but task is already holding lock:
[ 56.387544] ffff0000fe512898 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488
[ 56.387582]
[ 56.387592] which lock already depends on the new lock.
[ 56.387600]
[ 56.387608]
[ 56.387618] the existing dependency chain (in reverse order) is:
[ 56.387626]
[ 56.387633] -> #1 (&port_lock_key){-.-.}-{2:2}:
[ 56.387671] lock_acquire+0xc8/0x2a0
[ 56.387680] _raw_spin_lock+0x6c/0x84
[ 56.387690] pl011_console_write+0x88/0x1e0
[ 56.387699] console_unlock+0x2f4/0x544
[ 56.387708] vprintk_emit+0x130/0x1c4
[ 56.387717] vprintk_default+0x4c/0x74
[ 56.387726] vprintk_func+0x1fc/0x204
[ 56.387735] printk+0x5c/0x84
[ 56.387744] register_console+0x340/0x38c
[ 56.387754] uart_add_one_port+0x4b0/0x590
[ 56.387763] pl011_register_port+0x98/0xd4
[ 56.387772] sbsa_uart_probe+0x240/0x294
[ 56.387781] platform_drv_probe+0x98/0xc0
[ 56.387791] really_probe+0x1b8/0x430
[ 56.387800] driver_probe_device+0x80/0xbc
[ 56.387809] __device_attach_driver+0x100/0x11c
[ 56.387821] bus_for_each_drv+0x84/0xd0
[ 56.387830] __device_attach+0xc4/0x168
[ 56.387840] device_initial_probe+0x18/0x24
[ 56.387849] bus_probe_device+0x38/0xa0
[ 56.387858] device_add+0x8f8/0xa10
[ 56.387868] platform_device_add+0x88/0x228
[ 56.387878] platform_device_register_full+0x13c/0x180
[ 56.387888] acpi_create_platform_device+0x1f4/0x254
[ 56.387897] acpi_bus_attach+0x284/0x2cc
[ 56.387906] acpi_bus_attach+0xcc/0x2cc
[ 56.387916] acpi_bus_attach+0xcc/0x2cc
[ 56.387925] acpi_bus_scan+0x4c/0xac
[ 56.387934] acpi_scan_init+0xc0/0x24c
[ 56.387943] acpi_init+0xa4/0xbc
[ 56.387952] do_one_initcall+0x9c/0x17c
[ 56.387961] do_initcall_level+0x9c/0xb8
[ 56.387971] do_initcalls+0x54/0x94
[ 56.387980] do_basic_setup+0x24/0x30
[ 56.387989] kernel_init_freeable+0x158/0x1b0
[ 56.387998] kernel_init+0x18/0x190
[ 56.388007] ret_from_fork+0x10/0x30
[ 56.388015]
[ 56.388023] -> #0 (console_owner){-.-.}-{0:0}:
[ 56.388060] validate_chain+0x658/0x2918
[ 56.388069] __lock_acquire+0xb4c/0xf98
[ 56.388078] lock_acquire+0xc8/0x2a0
[ 56.388088] console_lock_spinning_enable+0x60/0x70
[ 56.388097] console_unlock+0x2ac/0x544
[ 56.388106] vprintk_emit+0x130/0x1c4
[ 56.388115] vprintk_default+0x4c/0x74
[ 56.388124] vprintk_func+0x1fc/0x204
[ 56.388133] printk+0x5c/0x84
[ 56.388142] __handle_sysrq+0x180/0x200
[ 56.388151] handle_sysrq+0x30/0x3c
[ 56.388160] pl011_fifo_to_tty+0xf4/0x200
[ 56.388170] pl011_int+0x204/0x488
[ 56.388179] __handle_irq_event_percpu+0xac/0x1a0
[ 56.388188] handle_irq_event+0x64/0x150
[ 56.388198] handle_fasteoi_irq+0xf8/0x1cc
[ 56.388207] __handle_domain_irq+0x8c/0xd0
[ 56.388216] gic_handle_irq+0xc8/0x168
[ 56.388225] el1_irq+0xbc/0x180
[ 56.388234] arch_cpu_idle+0x3c/0x5c
[ 56.388243] do_idle+0x104/0x2b0
[ 56.388253] cpu_startup_entry+0x28/0x2c
[ 56.388262] rest_init+0x1f4/0x208
[ 56.388271] arch_call_rest_init+0x10/0x1c
[ 56.388280] start_kernel+0x3a4/0x420
[ 56.388288]
[ 56.388298] other info that might help us debug this:
[ 56.388305]
[ 56.388315] Possible unsafe locking scenario:
[ 56.388322]
[ 56.388332] CPU0 CPU1
[ 56.388341] ---- ----
[ 56.388349] lock(&port_lock_key);
[ 56.388373] lock(console_owner);
[ 56.388396] lock(&port_lock_key);
[ 56.388418] lock(console_owner);
[ 56.388440]
[ 56.388448] *** DEADLOCK ***
[ 56.388456]
[ 56.388465] 3 locks held by swapper/0/0:
[ 56.388473] #0: ffff0000fe512898 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488
[ 56.388516] #1: ffffb190db297770 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x0/0x40
[ 56.388559] #2: ffffb190db294990 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x128/0x1c4
[ 56.388602]
[ 56.388611] stack backtrace:
[ 56.388621] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.0 #2
[ 56.388632] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 56.388640] Call trace:
[ 56.388649] dump_backtrace+0x0/0x1d8
[ 56.388658] show_stack+0x1c/0x28
[ 56.388667] dump_stack+0xe4/0x190
[ 56.388676] print_circular_bug+0x5dc/0x610
[ 56.388685] check_noncircular+0x1a8/0x1b0
[ 56.388694] validate_chain+0x658/0x2918
[ 56.388703] __lock_acquire+0xb4c/0xf98
[ 56.388712] lock_acquire+0xc8/0x2a0
[ 56.388721] console_lock_spinning_enable+0x60/0x70
[ 56.388730] console_unlock+0x2ac/0x544
[ 56.388739] vprintk_emit+0x130/0x1c4
[ 56.388748] vprintk_default+0x4c/0x74
[ 56.388757] vprintk_func+0x1fc/0x204
[ 56.388766] printk+0x5c/0x84
[ 56.388776] __handle_sysrq+0x180/0x200
[ 56.388787] handle_sysrq+0x30/0x3c
[ 56.388796] pl011_fifo_to_tty+0xf4/0x200
[ 56.388805] pl011_int+0x204/0x488
[ 56.388815] __handle_irq_event_percpu+0xac/0x1a0
[ 56.388824] handle_irq_event+0x64/0x150
[ 56.388834] handle_fasteoi_irq+0xf8/0x1cc
[ 56.388843] __handle_domain_irq+0x8c/0xd0
[ 56.388852] gic_handle_irq+0xc8/0x168
[ 56.388861] el1_irq+0xbc/0x180
[ 56.388870] arch_cpu_idle+0x3c/0x5c
[ 56.388880] do_idle+0x104/0x2b0
[ 56.388889] cpu_startup_entry+0x28/0x2c
[ 56.388898] rest_init+0x1f4/0x208
[ 56.388907] arch_call_rest_init+0x10/0x1c
[ 56.388917] start_kernel+0x3a4/0x420

\
 
 \ /
  Last update: 2020-08-11 12:14    [W:0.055 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site