lkml.org 
[lkml]   [2020]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4.19 00/48] 4.19.139-rc1 review
On Mon, 10 Aug 2020 at 21:00, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.139 release.
> There are 48 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 12 Aug 2020 15:17:47 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.139-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
Regressions on x86_64.

We have added LTP tracing test suite this week and started noticing
kernel BUG on x86_64 KASAN enabled kernel. Which means this issue might not be
specific to this release candidate.

[ 90.134426] ==================================================================
[ 90.141651] BUG: KASAN: use-after-free in trace_stack_print+0x133/0x150
[ 90.148264] Read of size 8 at addr ffff888228015ffc by task cat/3569
[ 90.154613]
[ 90.156106] CPU: 3 PID: 3569 Comm: cat Not tainted 4.19.139-rc1 #1
[ 90.162278] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.2 05/23/2018
[ 90.169669] Call Trace:
[ 90.172115] dump_stack+0x7d/0xaa
[ 90.175463] print_address_description+0x67/0x229
[ 90.180165] ? trace_stack_print+0x133/0x150
[ 90.184460] kasan_report.cold+0xae/0x2fe
[ 90.188469] __asan_load8+0x54/0x90
[ 90.191959] trace_stack_print+0x133/0x150
[ 90.196051] print_trace_line+0x3c7/0x930
[ 90.200063] ? tracing_buffers_read+0x310/0x310
[ 90.204589] tracing_read_pipe+0x2db/0x530
[ 90.208687] __vfs_read+0xe5/0x3c0
[ 90.212093] ? __x64_sys_copy_file_range+0x360/0x360
[ 90.217059] ? fsnotify+0x7cb/0x7f0
[ 90.220550] ? _cond_resched+0x14/0x30
[ 90.224296] ? __inode_security_revalidate+0x5d/0x70
[ 90.229262] ? avc_policy_seqno+0x21/0x30
[ 90.233273] ? security_file_permission+0xc6/0xf0
[ 90.237970] ? security_file_permission+0xc6/0xf0
[ 90.242667] ? rw_verify_area+0x73/0x140
[ 90.246584] vfs_read+0xc8/0x1d0
[ 90.249808] ksys_read+0xbb/0x170
[ 90.253120] ? kernel_write+0xa0/0xa0
[ 90.256786] ? __audit_syscall_exit+0x3bb/0x430
[ 90.261320] __x64_sys_read+0x3e/0x50
[ 90.264985] do_syscall_64+0x63/0x160
[ 90.268649] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 90.273693] RIP: 0033:0x7f9596d9e071
[ 90.277266] Code: fe ff ff 48 8d 3d 3f 71 09 00 48 83 ec 08 e8 26
ee 01 00 66 0f 1f 44 00 00 48 8d 05 91 e8 2c 00 8b 00 85 c0 75 13 31
c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 41 54 49 89 d4
55 48
[ 90.296011] RSP: 002b:00007ffee5028688 EFLAGS: 00000246 ORIG_RAX:
0000000000000000
[ 90.303575] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f9596d9e071
[ 90.310699] RDX: 0000000000020000 RSI: 00007f9597269000 RDI: 0000000000000006
[ 90.317823] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000
[ 90.324947] R10: 00000000000008c6 R11: 0000000000000246 R12: 00007f9597269000
[ 90.332071] R13: 0000000000000006 R14: 0000000000000f8e R15: 0000000000020000
[ 90.339194]
[ 90.340684] The buggy address belongs to the page:
[ 90.345470] page:ffffea0008a00540 count:1 mapcount:0
mapping:0000000000000000 index:0x0
[ 90.353461] flags: 0x200000000000000()
[ 90.357215] raw: 0200000000000000 dead000000000100 dead000000000200
0000000000000000
[ 90.364952] raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
[ 90.372681] page dumped because: kasan: bad access detected
[ 90.378245]
[ 90.379736] Memory state around the buggy address:
[ 90.384523] ffff888228015f00: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 90.391741] ffff888228015f80: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 90.398951] >ffff888228016000: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 90.406161] ^
[ 90.409407] ffff888228016080: fc fc fc fc fc fc fc fc fb fb fb fb
fb fb fb fb
[ 90.416665] ffff888228016100: fb fb fb fb fb fb fb fb fc fc fc fc
fc fc fc fc
[ 90.423876] ==================================================================
[ 90.431095] Disabling lock debugging due to kernel taint


steps to reproduce:
- boot x86_64 with kasan enabled 4.19 stable kernel
- cd /opt/ltp
- ./runltp -f tracing

Full test log link,
https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.138-49-gb0e1bc72f7dd/testrun/3050053/suite/linux-log-parser/test/check-kernel-bug-1656536/log

kernel-config link,
https://builds.tuxbuild.com/BDfU1nbOpLG7hFIf-nv5dQ/kernel.config

Summary
------------------------------------------------------------------------

kernel: 4.19.139-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: b0e1bc72f7ddff40c7c5b68313d3ac76495d678d
git describe: v4.19.138-49-gb0e1bc72f7dd
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.138-49-gb0e1bc72f7dd

No fixes (compared to build v4.19.138)


Ran 34683 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kvm-unit-tests
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-ipc-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* v4l2-compliance
* ltp-commands-tests
* ltp-controllers-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-math-tests
* network-basic-tests
* perf
* libhugetlbfs
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-open-posix-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net

--
Linaro LKFT
https://lkft.linaro.org

\
 
 \ /
  Last update: 2020-08-11 10:28    [W:0.226 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site