[lkml]   [2020]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] drivers/net/wan/lapbether: Use needed_headroom instead of hard_header_len
On Fri, Jul 31, 2020 at 7:33 PM Willem de Bruijn
<> wrote:
> I quickly scanned the main x.25 datapath code. Specifically
> x25_establish_link, x25_terminate_link and x25_send_frame. These all
> write this 1 byte header. It appears to be an in-band communication
> means between the network and data link layer, never actually ending
> up on the wire?

Yes, this 1-byte header is just a "fake" header that is only for
communication between the network layer and the link layer. It never
ends up on wire.

I think we can think of it as the Ethernet header for Wifi drivers.
Although Wifi doesn't actually use the Ethernet header, Wifi drivers
use a "fake" Ethernet header to communicate with code outside of the
driver. From outside, it appears that Wifi drivers use the Ethernet

> > The best solution might be to implement header_ops for X.25 drivers
> > and let dev_hard_header create this 1-byte header, so that
> > hard_header_len can equal to the header length created by
> > dev_hard_header. This might be the best way to fit the logic of
> > af_packet.c. But this requires changing the interface of X.25 drivers
> > so it might be a big change.
> Agreed.

Actually I tried this solution today. It was easier to implement than
I originally thought. I implemented header_ops to make dev_hard_header
generate the 1-byte header. And when receiving, (according to the
requirement of af_packet.c) I pulled this 1-byte header before
submitting the packet to upper layers. Everything worked fine, except
one issue:

When receiving, af_packet.c doesn't handle 0-sized packets well. It
will drop them. This causes an AF_PACKET/DGRAM socket to receive no
indication when it is connected or disconnected. Do you think this is
a problem? Actually I'm also afraid that future changes in af_packet.c
will make 0-sized packets not able to pass when sending as well.

> Either lapbeth_xmit has to have a guard against 0 byte packets before
> reading skb->data[0], or packet sockets should not be able to generate
> those (is this actually possible today through PF_PACKET? not sure)
> If SOCK_DGRAM has to always select one of the three values (0x00:
> data, 0x01: establish, 0x02: terminate) the first seems most sensible.
> Though if there is no way to establish a connection with
> PF_PACKET/SOCK_DGRAM, that whole interface may still be academic.
> Maybe eventually either 0x00 or 0x01 could be selected based on
> lapb->state.. That however is out of scope of this fix.

Yes, I think the first solution may be better, because we need to have
a way to drop 0-sized DGRAM packets (as long as we need to include the
1-byte header when sending DGRAM packets) and I'm not aware
af_packet.c can do this.

Yes, I think maybe the best way is to get rid of the 1-byte header
completely and use other ways to ask the driver to connect or
disconnect, or let it connect and disconnect automatically.

> Normally a fix should aim to have a Fixes: tag, but all this code
> precedes git history, so that is not feasible here.

Thanks for pointing this out!

 \ /
  Last update: 2020-08-01 14:46    [W:0.069 / U:14.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site