lkml.org 
[lkml]   [2020]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: omap: handle pin config bias flags
Date
Modify omap_gpio_set_config() to handle pin config bias flags by calling
gpiochip_generic_config().

The pin group for the gpio line must have the corresponding pinconf
properties:

PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"

This is necessary for pcs_pinconf_set() to find the requested bias
parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.

Signed-off-by: Drew Fustini <drew@beagleboard.org>
---
drivers/gpio/gpio-omap.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b8e2ecc3eade..a471a152f318 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -896,12 +896,25 @@ static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
unsigned long config)
{
u32 debounce;
+ int ret;

- if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
- return -ENOTSUPP;
+ if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
+ (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
+ (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
+ {
+ ret = gpiochip_generic_config(chip, offset, config);
+ }
+ else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE)
+ {
+ debounce = pinconf_to_config_argument(config);
+ ret = omap_gpio_debounce(chip, offset, debounce);
+ }
+ else
+ {
+ ret = -ENOTSUPP;
+ }

- debounce = pinconf_to_config_argument(config);
- return omap_gpio_debounce(chip, offset, debounce);
+ return ret;
}

static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
--
2.25.1
\
 
 \ /
  Last update: 2020-07-10 00:35    [W:0.079 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site