lkml.org 
[lkml]   [2020]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] spi: spi-qcom-qspi: Avoid some per-transfer overhead
From
Date

On 7/8/2020 1:46 AM, Douglas Anderson wrote:
> Not to be confused with the similar series I posed for the _other_
> Qualcomm SPI controller (spi-geni-qcom) [1], this one avoids the
> overhead on the Quad SPI controller.
>
> It's based atop the current Qualcomm tree including Rajendra's ("spi:
> spi-qcom-qspi: Use OPP API to set clk/perf state"). As discussed in
> individual patches, these could ideally land through the Qualcomm tree
> with Mark's Ack.
>
> Measuring:
> * Before OPP / Interconnect patches reading all flash takes: ~3.4 seconds
> * After OPP / Interconnect patches reading all flash takes: ~4.7 seconds
> * After this patch reading all flash takes: ~3.3 seconds
>
> [1] https://lore.kernel.org/r/20200702004509.2333554-1-dianders@chromium.org
> [2] https://lore.kernel.org/r/1593769293-6354-2-git-send-email-rnayak@codeaurora.org
>
>
> Douglas Anderson (2):
> spi: spi-qcom-qspi: Avoid clock setting if not needed
> spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
>
> drivers/spi/spi-qcom-qspi.c | 45 ++++++++++++++++++++++++++++---------
> 1 file changed, 35 insertions(+), 10 deletions(-)

Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>

\
 
 \ /
  Last update: 2020-07-09 08:52    [W:0.114 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site