lkml.org 
[lkml]   [2020]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 04/10] iommu/mediatek: Setting MISC_CTRL register
From
Date


On 03/07/2020 06:41, Chao Hao wrote:
> Add F_MMU_IN_ORDER_WR_EN_MASK and F_MMU_STANDARD_AXI_MODE_EN_MASK
> definitions in MISC_CTRL register.
> F_MMU_STANDARD_AXI_MODE_EN_MASK:
> If we set F_MMU_STANDARD_AXI_MODE_EN_MASK (bit[3][19] = 0, not follow
> standard AXI protocol), the iommu will priorize sending of urgent read
> command over a normal read command. This improves the performance.
> F_MMU_IN_ORDER_WR_EN_MASK:
> If we set F_MMU_IN_ORDER_WR_EN_MASK (bit[1][17] = 0, out-of-order write),
> the iommu will re-order write commands and send the write commands with
> higher priority. Otherwise the sending of write commands will be done in
> order. The feature is controlled by OUT_ORDER_WR_EN platform data flag.
>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Suggested-by: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
> drivers/iommu/mtk_iommu.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 40ca564d97af..219d7aa6f059 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -42,6 +42,9 @@
> #define F_INVLD_EN1 BIT(1)
>
> #define REG_MMU_MISC_CTRL 0x048
> +#define F_MMU_IN_ORDER_WR_EN_MASK (BIT(1) | BIT(17))
> +#define F_MMU_STANDARD_AXI_MODE_MASK (BIT(3) | BIT(19))
> +
> #define REG_MMU_DCM_DIS 0x050
>
> #define REG_MMU_CTRL_REG 0x110
> @@ -105,6 +108,7 @@
> #define HAS_BCLK BIT(1)
> #define HAS_VLD_PA_RNG BIT(2)
> #define RESET_AXI BIT(3)
> +#define OUT_ORDER_WR_EN BIT(4)
>
> #define MTK_IOMMU_HAS_FLAG(pdata, _x) \
> ((((pdata)->flags) & (_x)) == (_x))
> @@ -585,8 +589,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>
> if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
> /* The register is called STANDARD_AXI_MODE in this case */
> - writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> + regval = 0;
> + } else {
> + regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> + regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
> + if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN))
> + regval &= ~F_MMU_IN_ORDER_WR_EN_MASK;
> }
> + writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
>
> if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> dev_name(data->dev), (void *)data)) {
>

\
 
 \ /
  Last update: 2020-07-06 17:19    [W:0.546 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site