lkml.org 
[lkml]   [2020]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFT PATCH v4 0/9] Add UEFI support for RISC-V
On Thu, 30 Jul 2020 at 02:36, Atish Patra <atish.patra@wdc.com> wrote:
>
> This series adds UEFI support for RISC-V.
>
> Linux kernel: 5.8-rc7 + 1 exception vector setup patch (queued for for-next)
> U-Boot: v2020.07
> OpenSBI: master
>
> This series depends on early setup of exeception vector patch
> http://lists.infradead.org/pipermail/linux-riscv/2020-July/001207.html
>
> Patch 1-3 are generic riscv feature addition required for UEFI support.
> Patch 4-7 adds the efi stub support for RISC-V which was reviewed few months back.
> https://www.spinics.net/lists/linux-efi/msg19144.html
> Patch 8 just renames arm-init code so that it can be used across different
> architectures. Patch 11 adds the runtime services for RISC-V.
>
> The working set of patches can also be found in following git repo.
> https://github.com/atishp04/linux/tree/uefi_riscv_5.9_v4
>


Thanks Atish.

I think these patches have now reached a state where you can stop
sending out new revisions until you have something that works as
expected in combination with EDK2 based firmware that implements the
UEFI runtime services fully.


> The patches have been verified on Qemu/HiFive unleashed using bootefi command in
> U-Boot for both RV32 and RV64.
>
> For RV32, maximum allocated memory should be 1G as RISC-V kernel can not map
> beyond 1G of physical memory for RV32.
>
> Runtime services have been verified with fwts. Here is the snippet of the result.
>
> ***********************************************************************
> This test run on 16/07/20 at 17:54:53 on host Linux fedora-riscv
> 5.8.0-rc5-00015-g5e61441080fd-dirty #938 SMP Thu Jul 16 14:50:11 PDT 2020
> riscv64.
>
> Command: "fwts uefirtvariable".
> Running tests: uefirtvariable.
>
> uefirtvariable: UEFI Runtime service variable interface tests.
> Test 1 of 9: Test UEFI RT service get variable interface.
> SKIPPED: Test 1, Skipping test, SetVariable runtime service is not supported on
> this platform.
>
> Test 2 of 9: Test UEFI RT service get next variable name interface.
> The runtime service GetNextVariableName interface function test.
> SKIPPED: Test 2, Skipping test, SetVariable runtime service is not supported on
> this platform.
>
> ...
>
> Test 4 of 9: Test UEFI RT service query variable info interface.
> SKIPPED: Test 4, Not support the QueryVariableInfo UEFI runtime interface:
> cannot test.
>
> ADVICE: Firmware also needs to check if the revision of system table is correct
> or not. Linux kernel returns EFI_UNSUPPORTED as well, if the FirmwareRevision of
> system table is less than EFI_2_00_SYSTEM_TABLE_REVISION.
>
> ...
> ***********************************************************************
>
> Currently, U-Boot EFI implementation returns EFI_UNSUPPORTED for set_variable
> service. That's why all tests have been skipped but I manually verified that the
> value is returned from U-Boot not kernel :).
>
> EDK2 can boot quite far into Linux with the current series. However, it crashes
> before userspace because of a possible memory corruption by EDK2.
>
> Changes from v3->v4:
> 1. Used pgd mapping to avoid copying DT to bss.
>
> Changes from v2->v3:
> 1. Fixed few bugs in run time services page table mapping.
> 2. Dropped patch 1 as it is already taken into efi-tree.
> 3. Sent few generic mmu fixes as a separate series to ease the merge conflicts.
>
> Changes from v1->v2:
> 1. Removed patch 1 as it is already taken into efi-tree.
> 2. Fixed compilation issues with patch 9.
> 3. Moved few function prototype declaration to header file to keep kbuild happy.
>
> Changes from previous version:
> 1. Added full ioremap support.
> 2. Added efi runtime services support.
> 3. Fixes mm issues
>
> Anup Patel (1):
> RISC-V: Move DT mapping outof fixmap
>
> Atish Patra (8):
> RISC-V: Add early ioremap support
> RISC-V: Implement late mapping page table allocation functions
> include: pe.h: Add RISC-V related PE definition
> RISC-V: Add PE/COFF header for EFI stub
> RISC-V: Add EFI stub support.
> efi: Rename arm-init to efi-init common for all arch
> RISC-V: Add EFI runtime services
> RISC-V: Add page table dump support for uefi
>
> arch/riscv/Kconfig | 25 +++
> arch/riscv/Makefile | 1 +
> arch/riscv/configs/defconfig | 1 +
> arch/riscv/include/asm/Kbuild | 1 +
> arch/riscv/include/asm/efi.h | 56 +++++++
> arch/riscv/include/asm/fixmap.h | 16 +-
> arch/riscv/include/asm/io.h | 1 +
> arch/riscv/include/asm/mmu.h | 2 +
> arch/riscv/include/asm/pgtable.h | 5 +
> arch/riscv/include/asm/sections.h | 13 ++
> arch/riscv/kernel/Makefile | 5 +
> arch/riscv/kernel/efi-header.S | 104 +++++++++++++
> arch/riscv/kernel/efi.c | 105 +++++++++++++
> arch/riscv/kernel/head.S | 17 ++-
> arch/riscv/kernel/head.h | 2 -
> arch/riscv/kernel/image-vars.h | 51 +++++++
> arch/riscv/kernel/setup.c | 17 ++-
> arch/riscv/kernel/vmlinux.lds.S | 22 ++-
> arch/riscv/mm/init.c | 90 ++++++++---
> arch/riscv/mm/ptdump.c | 48 +++++-
> drivers/firmware/efi/Kconfig | 3 +-
> drivers/firmware/efi/Makefile | 4 +-
> .../firmware/efi/{arm-init.c => efi-init.c} | 0
> drivers/firmware/efi/libstub/Makefile | 10 ++
> drivers/firmware/efi/libstub/efi-stub.c | 11 +-
> drivers/firmware/efi/libstub/riscv-stub.c | 110 ++++++++++++++
> drivers/firmware/efi/riscv-runtime.c | 143 ++++++++++++++++++
> include/linux/pe.h | 3 +
> 28 files changed, 825 insertions(+), 41 deletions(-)
> create mode 100644 arch/riscv/include/asm/efi.h
> create mode 100644 arch/riscv/include/asm/sections.h
> create mode 100644 arch/riscv/kernel/efi-header.S
> create mode 100644 arch/riscv/kernel/efi.c
> create mode 100644 arch/riscv/kernel/image-vars.h
> rename drivers/firmware/efi/{arm-init.c => efi-init.c} (100%)
> create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
> create mode 100644 drivers/firmware/efi/riscv-runtime.c
>
> --
> 2.24.0
>

\
 
 \ /
  Last update: 2020-07-31 15:26    [W:0.068 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site