lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Introduce support for Systems Management Driver over WMI for Dell Systems
Date
From: Divya Bharathi <divya.bharathi@dell.com>

The Dell WMI Systems Management Driver provides a sysfs
interface for systems management to enable BIOS configuration
capability on certain Dell Systems.

This driver allows user to configure Dell systems with a
uniform common interface. To facilitate this, the patch
introduces a generic way for driver to be able to create
configurable BIOS Attributes available in Setup (F2) screen.

Co-developed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Co-developed-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>

---
NOTE: This patch series is intended to go on top of
platform-drivers-x86 linux-next.

.../testing/sysfs-platform-dell-wmi-sysman | 201 ++++++
MAINTAINERS | 9 +
drivers/platform/x86/Kconfig | 11 +
drivers/platform/x86/Makefile | 8 +
.../x86/dell-wmi-biosattr-interface.c | 263 ++++++++
.../platform/x86/dell-wmi-enum-attributes.c | 207 +++++++
.../platform/x86/dell-wmi-int-attributes.c | 188 ++++++
.../x86/dell-wmi-passobj-attributes.c | 161 +++++
.../x86/dell-wmi-passwordattr-interface.c | 230 +++++++
.../platform/x86/dell-wmi-string-attributes.c | 170 ++++++
.../platform/x86/dell-wmi-sysman-attributes.c | 575 ++++++++++++++++++
.../platform/x86/dell-wmi-sysman-attributes.h | 125 ++++
12 files changed, 2148 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-platform-dell-wmi-sysman
create mode 100644 drivers/platform/x86/dell-wmi-biosattr-interface.c
create mode 100644 drivers/platform/x86/dell-wmi-enum-attributes.c
create mode 100644 drivers/platform/x86/dell-wmi-int-attributes.c
create mode 100644 drivers/platform/x86/dell-wmi-passobj-attributes.c
create mode 100644 drivers/platform/x86/dell-wmi-passwordattr-interface.c
create mode 100644 drivers/platform/x86/dell-wmi-string-attributes.c
create mode 100644 drivers/platform/x86/dell-wmi-sysman-attributes.c
create mode 100644 drivers/platform/x86/dell-wmi-sysman-attributes.h

diff --git a/Documentation/ABI/testing/sysfs-platform-dell-wmi-sysman b/Documentation/ABI/testing/sysfs-platform-dell-wmi-sysman
new file mode 100644
index 000000000000..8ca3e502ed89
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dell-wmi-sysman
@@ -0,0 +1,201 @@
+What: /sys/devices/platform/dell-wmi-sysman/attributes/
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ The Dell WMI Systems Management Driver provides a sysfs interface
+ for systems management software to enable BIOS configuration
+ capability on certain Dell systems. This directory exposes
+ interfaces for interacting with BIOS attributes
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/reset_bios
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ This attribute can be used to reset the BIOS Configuration.
+ Specifically, it tells which type of reset BIOS configuration is being
+ requested on the host.
+
+ Reading from it returns a list of supported options encoded as:
+
+ 'builtinsafe' (Built in safe configuration profile)
+ 'lastknowngood' (Last known good saved configuration profile)
+ 'factory' (Default factory settings configuration profile)
+ 'custom' (Custom saved configuration profile)
+
+ The currently selected option is printed in square brackets as
+ shown below:
+
+ # echo "factory" > sys/devices/platform/dell-wmi-sysman/attributes/reset_bios
+
+ # cat sys/devices/platform/dell-wmi-sysman/attributes/reset_bios
+ # builtinsafe lastknowngood [factory] custom
+
+ Note that any changes to this attribute requires a reboot
+ for changes to take effect.
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/pending_reboot
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ A read-only attribute enumerating if a reboot is pending
+ on any BIOS attribute change.
+
+ 0: No pending reboot
+ 1: Pending reboot
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/enumeration/<attr>/
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ This directory exposes interfaces for interaction with
+ BIOS enumeration attributes.
+
+ Enumeration attributes are settings that accept set of
+ pre-defined valid values.
+
+ current_value: A file that can be read to obtain the current
+ value of the <attr>
+
+ This file can also be written to in order to update
+ the value of a <attr>
+
+ default_value: A file that can be read to obtain the default
+ value of the <attr>
+
+ display_name: A file that can be read to obtain a user friendly
+ description of the at <attr>
+
+ display_name_language_code: A file that can be read to obtain
+ the language code corresponding to the "display_name" of the <attr>
+
+ modifier: A file that can be read to obtain attribute-level
+ dependency rule which has to be met to configure <attr>
+
+ possible_value: A file that can be read to obtain the possible
+ value of the <attr>
+
+ value_modifier: A file that can be read to obtain value-level
+ dependency on a possible value which has to be met to configure <attr>
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/integer/<attr>/
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ This directory exposes interfaces for interaction with
+ BIOS integer attributes.
+
+ Integer attributes are settings that accept a range of
+ numerical values for inputs. Each BIOS integer has a
+ lower bound and an upper bound on the values that it can take.
+
+ current_value: A file that can be read to obtain the current
+ value of the <attr>
+
+ This file can also be written to in order to update
+ the value of an <attr>.
+
+ default_value: A file that can be read to obtain the default
+ value of the <attr>
+
+ display_name: A file that can be read to obtain a user friendly
+ description of the at <attr>
+
+ display_name_language_code: A file that can be read to obtain
+ the language code corresponding to the "display_name" of the <attr>
+
+ lower_bound: A file that can be read to obtain the lower
+ bound value of the <attr>
+
+ modifier: A file that can be read to obtain attribute-level
+ dependency rule which has to be met to configure <attr>
+
+ scalar_increment: A file that can be read to obtain the
+ resolution of the incremental value this attribute accepts.
+
+ upper_bound: A file that can be read to obtain the upper
+ bound value of the <attr>
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/string/<attr>/
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ This directory exposes interfaces for interaction with
+ BIOS string attributes.
+
+ String attributes are settings that accept a string for an input.
+ Each BIOS string is characterized by the minimum length of the string,
+ the maximum length of the string, and the type of the string.
+
+ current_value: A file that can be read to obtain the current
+ value of the <attr>
+
+ This file can also be written to in order to update
+ the value of an <attr>.
+
+ default_value: A file that can be read to obtain the default
+ value of the <attr>
+
+ display_name: A file that can be read to obtain a user friendly
+ description of the at <attr>
+
+ display_name_language_code: A file that can be read to obtain
+ the language code corresponding to the "display_name" of the <attr>
+
+ max_length: A file that can be read to obtain the maximum
+ length value of the <attr>
+
+ min_length: A file that can be read to obtain the minimum
+ length value of the <attr>
+
+ modifier: A file that can be read to obtain attribute-level
+ dependency rule which has to be met to configure <attr>
+
+What: /sys/devices/platform/dell-wmi-sysman/attributes/password/<attr>/
+Date: October 2020
+KernelVersion: 5.9
+Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
+ Mario Limonciello <mario.limonciello@dell.com>,
+ Prasanth KSR <prasanth.ksr@dell.com>
+Description:
+ This directory exposes interfaces for interaction with
+ BIOS password attributes.
+
+ BIOS Admin password and System Password can be set, reset or cleared
+ using these attributes.
+
+ An "Admin" password is used for preventing modification to the BIOS settings.
+ A "System" password is required to boot a machine.
+
+ is_password_set: A file that can be read
+ to obtain flag to see if a password is set on <attr>
+
+ max_password_length: A file that can be read to obtain the
+ maximum length of the Password
+
+ min_password_length: A file that can be read to obtain the
+ minimum length of the Password
+
+ current_password: A write only value used for privileged access
+ such as setting attributes when a system or admin password is set
+ or resetting to a new password
+
+ new_password: A write only value that when used in tandem with
+ current_password will reset a system or admin password.
diff --git a/MAINTAINERS b/MAINTAINERS
index e64cdde81851..176311d712db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4879,6 +4879,15 @@ M: Mario Limonciello <mario.limonciello@dell.com>
S: Maintained
F: drivers/platform/x86/dell-wmi-descriptor.c

+DELL WMI SYSMAN DRIVER
+M: Divya Bharathi <divya.bharathi@dell.com>
+M: Mario Limonciello <mario.limonciello@dell.com>
+M: Prasanth Ksr <prasanth.ksr@dell.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/dell-wmi-*-attributes.*
+F: drivers/platform/x86/dell-wmi-*-interface.c
+
DELL WMI NOTIFICATIONS DRIVER
M: Matthew Garrett <mjg59@srcf.ucam.org>
M: Pali Rohár <pali@kernel.org>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 0581a54cf562..de66373554c2 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -430,6 +430,17 @@ config DELL_WMI
To compile this driver as a module, choose M here: the module will
be called dell-wmi.

+config DELL_WMI_SYSMAN
+ tristate "Dell WMI SYSMAN"
+ depends on ACPI_WMI
+ depends on DMI
+ help
+ This driver allows changing BIOS settings on many Dell machines from
+ 2018 and newer without the use of any additional software.
+
+ To compile this driver as a module, choose M here: the module will
+ be called dell-wmi-sysman.
+
config DELL_WMI_DESCRIPTOR
tristate
depends on ACPI_WMI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 2b85852a1a87..bee03f1af28f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -47,6 +47,14 @@ obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_DELL_WMI_DESCRIPTOR) += dell-wmi-descriptor.o
obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
obj-$(CONFIG_DELL_WMI_LED) += dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN) += dell-wmi-sysman.o
+dell-wmi-sysman-objs := dell-wmi-sysman-attributes.o \
+ dell-wmi-enum-attributes.o \
+ dell-wmi-int-attributes.o \
+ dell-wmi-string-attributes.o \
+ dell-wmi-passobj-attributes.o \
+ dell-wmi-passwordattr-interface.o \
+ dell-wmi-biosattr-interface.o

# Fujitsu
obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o
diff --git a/drivers/platform/x86/dell-wmi-biosattr-interface.c b/drivers/platform/x86/dell-wmi-biosattr-interface.c
new file mode 100644
index 000000000000..decf124d4388
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-biosattr-interface.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to SET methods under BIOS attributes interface GUID for use
+ * with dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include <linux/wmi.h>
+#include "dell-wmi-sysman-attributes.h"
+
+#define SETDEFAULTVALUES_METHOD_ID 0x02
+#define SETBIOSDEFAULTS_METHOD_ID 0x03
+#define SETATTRIBUTE_METHOD_ID 0x04
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+struct wmi_interface_priv {
+ struct list_head list;
+ struct wmi_device *wdev;
+ struct device *child;
+ bool pending_changes;
+};
+static LIST_HEAD(interface_list);
+
+static inline struct wmi_interface_priv *get_first_interface_priv(void)
+{
+ return list_first_entry_or_null(&interface_list,
+ struct wmi_interface_priv,
+ list);
+}
+
+static int call_biosattributes_interface(struct wmi_device *wdev, char *in_args, size_t size,
+ int method_id)
+{
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ struct acpi_buffer input;
+ union acpi_object *obj;
+ acpi_status status;
+ int ret = -EIO;
+
+ input.length = (acpi_size) size;
+ input.pointer = in_args;
+ status = wmidev_evaluate_method(wdev, 0, method_id, &input, &output);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+ obj = (union acpi_object *)output.pointer;
+ if (obj->type == ACPI_TYPE_INTEGER)
+ ret = obj->integer.value;
+
+ kfree(output.pointer);
+ kobject_uevent(&wdev->dev.kobj, KOBJ_CHANGE);
+ return map_wmi_error(ret);
+}
+
+/**
+ * get_pending_changes() - Fetch if any changes are pending
+ *
+ * Checks if any changes have been written that will be changed
+ * after a system reboot
+ **/
+bool get_pending_changes(void)
+{
+ struct wmi_interface_priv *priv;
+
+ priv = get_first_interface_priv();
+ if (priv)
+ return priv->pending_changes;
+ return 0;
+}
+
+/**
+ * set_attribute() - Update an attribute value
+ * @a_name: The attribute name
+ * @a_value: The attribute value
+ *
+ * Sets an attribute to new value
+ **/
+int set_attribute(const char *a_name, const char *a_value)
+{
+ int ret = -1;
+ int i;
+ u8 *name_len, *value_len;
+ char *current_password, *attribute_name, *attribute_value;
+ size_t security_area_size;
+ size_t string_area_size;
+ size_t buffer_size;
+ struct wmi_interface_priv *priv;
+ char *buffer;
+
+ /* look up if user set a password for the requests */
+ current_password = get_current_password("Admin");
+ if (!current_password)
+ return -ENODEV;
+
+ /* password is set */
+ if (strlen(current_password) > 0)
+ security_area_size = (sizeof(u32) * 2) + strlen(current_password) +
+ strlen(current_password) % 2;
+ /* password not set */
+ else
+ security_area_size = sizeof(u32) * 2;
+ string_area_size = (strlen(a_name) + strlen(a_value))*2;
+ buffer_size = security_area_size + string_area_size + sizeof(u16) * 2;
+
+ buffer = kzalloc(buffer_size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* build security area */
+ if (strlen(current_password) > 0)
+ populate_security_buffer(buffer, current_password);
+
+ name_len = buffer + security_area_size;
+ attribute_name = name_len + sizeof(u16);
+ value_len = attribute_name + strlen(a_name)*2;
+ attribute_value = value_len + sizeof(u16);
+
+ /* turn into UTF16 strings, no NULL terminator */
+ *name_len = strlen(a_name)*2;
+ *value_len = strlen(a_value)*2;
+ for (i = 0; i < strlen(a_name); i++)
+ attribute_name[i*2] = a_name[i];
+ for (i = 0; i < strlen(a_value); i++)
+ attribute_value[i*2] = a_value[i];
+
+ mutex_lock(&call_mutex);
+ priv = get_first_interface_priv();
+ if (!priv) {
+ ret = -ENODEV;
+ pr_err(DRIVER_NAME ": no WMI backend bound");
+ goto out_set_attribute;
+ }
+
+ ret = call_biosattributes_interface(priv->wdev, buffer, buffer_size,
+ SETATTRIBUTE_METHOD_ID);
+ if (ret == -EOPNOTSUPP)
+ dev_err(&priv->wdev->dev, "admin password must be configured");
+ else if (ret == -EACCES)
+ dev_err(&priv->wdev->dev, "invalid password");
+
+ priv->pending_changes = 1;
+out_set_attribute:
+ kfree(buffer);
+ mutex_unlock(&call_mutex);
+
+ return ret;
+}
+
+/**
+ * set_bios_defaults() - Resets BIOS defaults
+ * @deftype: the type of BIOS value reset to issue.
+ *
+ * Resets BIOS defaults
+ **/
+int set_bios_defaults(u8 deftype)
+{
+ int ret = -1;
+ u8 *defaultType;
+ char *current_password, *buffer;
+ size_t security_area_size;
+ size_t integer_area_size = sizeof(u8);
+ size_t buffer_size;
+ struct wmi_interface_priv *priv;
+
+ /* look up if user set a password for the requests */
+ current_password = get_current_password("Admin");
+ if (!current_password)
+ return -ENODEV;
+
+ /* password is set */
+ if (strlen(current_password) > 0)
+ security_area_size = (sizeof(u32) * 2) + strlen(current_password) +
+ strlen(current_password) % 2;
+ /* password not set */
+ else
+ security_area_size = sizeof(u32) * 2;
+
+ buffer_size = security_area_size + integer_area_size;
+ buffer = kzalloc(buffer_size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* build security area */
+ if (strlen(current_password) > 0)
+ populate_security_buffer(buffer, current_password);
+
+ mutex_lock(&call_mutex);
+ priv = get_first_interface_priv();
+ if (!priv) {
+ ret = -ENODEV;
+ pr_err(DRIVER_NAME ": no WMI backend bound");
+ goto out_bios_defaults;
+ }
+
+ defaultType = buffer + security_area_size;
+ *defaultType = deftype;
+
+ ret = call_biosattributes_interface(priv->wdev, buffer, buffer_size,
+ SETBIOSDEFAULTS_METHOD_ID);
+ if (ret)
+ dev_err(&priv->wdev->dev, "reset BIOS defaults failed: %d", ret);
+ priv->pending_changes = 1;
+out_bios_defaults:
+ kfree(buffer);
+ mutex_unlock(&call_mutex);
+
+ return ret;
+}
+
+static int dell_wmi_bios_attr_set_interface_probe(struct wmi_device *wdev, const void *context)
+{
+ struct wmi_interface_priv *priv;
+
+ priv = devm_kzalloc(&wdev->dev, sizeof(struct wmi_interface_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->wdev = wdev;
+ dev_set_drvdata(&wdev->dev, priv);
+ mutex_lock(&list_mutex);
+ list_add_tail(&priv->list, &interface_list);
+ mutex_unlock(&list_mutex);
+ return 0;
+}
+
+static int dell_wmi_bios_attr_set_interface_remove(struct wmi_device *wdev)
+{
+ struct wmi_interface_priv *priv = dev_get_drvdata(&wdev->dev);
+
+ mutex_lock(&call_mutex);
+ mutex_lock(&list_mutex);
+ list_del(&priv->list);
+ mutex_unlock(&list_mutex);
+ mutex_unlock(&call_mutex);
+ return 0;
+}
+
+static const struct wmi_device_id dell_wmi_bios_attr_set_interface_id_table[] = {
+ { .guid_string = DELL_WMI_BIOS_ATTRIBUTES_INTERFACE_GUID },
+ { },
+};
+static struct wmi_driver dell_wmi_bios_attr_set_interface_driver = {
+ .driver = {
+ .name = DRIVER_NAME"-set"
+ },
+ .probe = dell_wmi_bios_attr_set_interface_probe,
+ .remove = dell_wmi_bios_attr_set_interface_remove,
+ .id_table = dell_wmi_bios_attr_set_interface_id_table,
+};
+
+int init_dell_wmi_bios_attr_set_interface(void)
+{
+ return wmi_driver_register(&dell_wmi_bios_attr_set_interface_driver);
+}
+
+void exit_dell_wmi_bios_attr_set_interface(void)
+{
+ wmi_driver_unregister(&dell_wmi_bios_attr_set_interface_driver);
+}
+
+MODULE_DEVICE_TABLE(wmi, dell_wmi_bios_attr_set_interface_id_table);
diff --git a/drivers/platform/x86/dell-wmi-enum-attributes.c b/drivers/platform/x86/dell-wmi-enum-attributes.c
new file mode 100644
index 000000000000..a2d8ae291d5c
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-enum-attributes.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to enumeration type attributes under BIOS Enumeration GUID for use
+ * with dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+/* kept variable names same as in sysfs file name for sysfs_show macro definition */
+struct enumeration_data {
+ char attribute_name[MAX_BUFF];
+ char display_name_language_code[MAX_BUFF];
+ char display_name[MAX_BUFF];
+ char default_value[MAX_BUFF];
+ char current_value[MAX_BUFF];
+ char modifier[MAX_BUFF];
+ int value_modifier_count;
+ char value_modifier[MAX_BUFF];
+ int possible_value_count;
+ char possible_value[MAX_BUFF];
+};
+
+static struct enumeration_data *enumeration_data;
+static int enumeration_instances_count;
+get_instance_id(enumeration);
+
+static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
+{
+ int instance_id;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ instance_id = get_enumeration_instance_id(kobj);
+ if (instance_id >= 0) {
+ union acpi_object *obj;
+
+ obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
+ if (!obj)
+ return -AE_ERROR;
+ strncpy_attr(enumeration_data[instance_id].current_value,
+ obj->package.elements[CURRENT_VAL].string.pointer);
+ kfree(obj);
+ return sprintf(buf, "%s\n", enumeration_data[instance_id].current_value);
+ }
+ return -EIO;
+}
+
+/**
+ * validate_enumeration_input() - Validate input of current_value against possible values
+ * @instance_id: The instance on which input is validated
+ * @buf: Input value
+ **/
+int validate_enumeration_input(int instance_id, const char *buf)
+{
+ int ret = -EINVAL;
+ char *options, *tmp, *p;
+
+ options = tmp = kstrdup((enumeration_data[instance_id].possible_value), GFP_KERNEL);
+ if (!options)
+ return -ENOMEM;
+
+ while ((p = strsep(&options, ";")) != NULL) {
+ if (!*p)
+ continue;
+ if (!strncasecmp(p, buf, strlen(p))) {
+ ret = 0;
+ break;
+ }
+ }
+
+ kfree(tmp);
+ return ret;
+}
+
+attribute_s_property_show(display_name_language_code, enumeration);
+static struct kobj_attribute displ_langcode =
+ __ATTR_RO(display_name_language_code);
+
+attribute_s_property_show(display_name, enumeration);
+struct kobj_attribute displ_name =
+ __ATTR_RO(display_name);
+
+attribute_s_property_show(default_value, enumeration);
+struct kobj_attribute default_val =
+ __ATTR_RO(default_value);
+
+attribute_property_store(current_value, enumeration);
+struct kobj_attribute current_val =
+ __ATTR_RW(current_value);
+
+attribute_s_property_show(modifier, enumeration);
+struct kobj_attribute modifier =
+ __ATTR_RO(modifier);
+
+attribute_s_property_show(value_modifier, enumeration);
+struct kobj_attribute value_modfr =
+ __ATTR_RO(value_modifier);
+
+attribute_s_property_show(possible_value, enumeration);
+struct kobj_attribute poss_val =
+ __ATTR_RO(possible_value);
+
+static struct attribute *enumeration_attrs[] = {
+ &displ_langcode.attr,
+ &displ_name.attr,
+ &default_val.attr,
+ &current_val.attr,
+ &modifier.attr,
+ &value_modfr.attr,
+ &poss_val.attr,
+ NULL,
+};
+
+static const struct attribute_group enumeration_attr_group = {
+ .attrs = enumeration_attrs,
+};
+
+int alloc_enum_data(void)
+{
+ int ret = 0;
+
+ enumeration_instances_count = get_instance_count(DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
+ enumeration_data = kzalloc((sizeof(struct enumeration_data) * enumeration_instances_count),
+ GFP_KERNEL);
+ if (!enumeration_data)
+ ret = -ENOMEM;
+ return ret;
+}
+
+/**
+ * populate_enum_data() - Populate all properties of an instance under enumeration attribute
+ * @enumeration_obj: ACPI object with enumeration data
+ * @instance_id: The instance to enumerate
+ * @attr_name_kobj: The parent kernel object
+ **/
+int populate_enum_data(union acpi_object *enumeration_obj, int instance_id,
+ struct kobject *attr_name_kobj)
+{
+ int i, next_obj;
+ int retval = sysfs_create_group(attr_name_kobj, &enumeration_attr_group);
+
+ if (retval)
+ goto out;
+
+ mutex_lock(&call_mutex);
+ strncpy_attr(enumeration_data[instance_id].attribute_name,
+ enumeration_obj[ATTR_NAME].string.pointer);
+ strncpy_attr(enumeration_data[instance_id].display_name_language_code,
+ enumeration_obj[DISPL_NAME_LANG_CODE].string.pointer);
+ strncpy_attr(enumeration_data[instance_id].display_name,
+ enumeration_obj[DISPLAY_NAME].string.pointer);
+ strncpy_attr(enumeration_data[instance_id].default_value,
+ enumeration_obj[DEFAULT_VAL].string.pointer);
+ strncpy_attr(enumeration_data[instance_id].current_value,
+ enumeration_obj[CURRENT_VAL].string.pointer);
+ strncpy_attr(enumeration_data[instance_id].modifier,
+ enumeration_obj[MODIFIER].string.pointer);
+
+ next_obj = MODIFIER + 1;
+
+ enumeration_data[instance_id].value_modifier_count =
+ (uintptr_t)enumeration_obj[next_obj].string.pointer;
+
+ for (i = 0; i < enumeration_data[instance_id].value_modifier_count; i++) {
+ strcat(enumeration_data[instance_id].value_modifier,
+ enumeration_obj[++next_obj].string.pointer);
+ strcat(enumeration_data[instance_id].value_modifier, ";");
+ }
+
+ enumeration_data[instance_id].possible_value_count =
+ (uintptr_t) enumeration_obj[++next_obj].string.pointer;
+
+ for (i = 0; i < enumeration_data[instance_id].possible_value_count; i++) {
+ strcat(enumeration_data[instance_id].possible_value,
+ enumeration_obj[++next_obj].string.pointer);
+ strcat(enumeration_data[instance_id].possible_value, ";");
+ }
+ mutex_unlock(&call_mutex);
+
+out:
+ return retval;
+}
+
+/**
+ * exit_enum_attributes() - Clear all attribute data
+ * @kset: The kset to free
+ *
+ * Clears all data allocated for this group of attributes
+ **/
+void exit_enum_attributes(struct kset *kset)
+{
+ struct kobject *pos, *next;
+
+ mutex_lock(&list_mutex);
+ list_for_each_entry_safe(pos, next, &kset->list, entry) {
+ sysfs_remove_group(pos, &enumeration_attr_group);
+ }
+ mutex_unlock(&list_mutex);
+ mutex_lock(&call_mutex);
+ kfree(enumeration_data);
+ mutex_unlock(&call_mutex);
+}
diff --git a/drivers/platform/x86/dell-wmi-int-attributes.c b/drivers/platform/x86/dell-wmi-int-attributes.c
new file mode 100644
index 000000000000..222971be2b48
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-int-attributes.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to integer type attributes under BIOS Integer GUID for use with
+ * dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+enum int_properties {LOWER_BOUND = 6, UPPER_BOUND, SCALAR_INCR};
+
+/* kept variable names same as in sysfs file name for sysfs_show macro definition */
+struct integer_data {
+ char attribute_name[MAX_BUFF];
+ char display_name_language_code[MAX_BUFF];
+ char display_name[MAX_BUFF];
+ int default_value;
+ int current_value;
+ char modifier[MAX_BUFF];
+ int lower_bound;
+ int upper_bound;
+ int scalar_increment;
+};
+
+static struct integer_data *integer_data;
+static int integer_instances_count;
+get_instance_id(integer);
+
+static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
+{
+ int instance_id;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ instance_id = get_integer_instance_id(kobj);
+ if (instance_id >= 0) {
+ union acpi_object *obj;
+
+ obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
+ if (!obj)
+ return -AE_ERROR;
+ integer_data[instance_id].current_value =
+ (uintptr_t)obj->package.elements[CURRENT_VAL].string.pointer;
+ kfree(obj);
+ return sprintf(buf, "%d\n", integer_data[instance_id].current_value);
+ }
+ return -EIO;
+}
+
+/**
+ * validate_integer_input() - Validate input of current_value against lower and upper bound
+ * @instance_id: The instance on which input is validated
+ * @buf: Input value
+ **/
+int validate_integer_input(int instance_id, const char *buf)
+{
+ int in_val;
+ int ret = -EINVAL;
+
+ if (kstrtoint(buf, 0, &in_val))
+ return -EINVAL;
+ if ((in_val >= integer_data[instance_id].lower_bound) &&
+ (in_val <= integer_data[instance_id].upper_bound))
+ ret = 0;
+
+ return ret;
+}
+
+attribute_s_property_show(display_name_language_code, integer);
+static struct kobj_attribute integer_displ_langcode =
+ __ATTR_RO(display_name_language_code);
+
+attribute_s_property_show(display_name, integer);
+struct kobj_attribute integer_displ_name =
+ __ATTR_RO(display_name);
+
+attribute_n_property_show(default_value, integer);
+struct kobj_attribute integer_default_val =
+ __ATTR_RO(default_value);
+
+attribute_property_store(current_value, integer);
+struct kobj_attribute integer_current_val =
+ __ATTR_RW(current_value);
+
+attribute_s_property_show(modifier, integer);
+struct kobj_attribute integer_modifier =
+ __ATTR_RO(modifier);
+
+attribute_n_property_show(lower_bound, integer);
+struct kobj_attribute integer_lower_bound =
+ __ATTR_RO(lower_bound);
+
+attribute_n_property_show(upper_bound, integer);
+struct kobj_attribute integer_upper_bound =
+ __ATTR_RO(upper_bound);
+
+attribute_n_property_show(scalar_increment, integer);
+struct kobj_attribute integer_scalar_increment =
+ __ATTR_RO(scalar_increment);
+
+static struct attribute *integer_attrs[] = {
+ &integer_displ_langcode.attr,
+ &integer_displ_name.attr,
+ &integer_default_val.attr,
+ &integer_current_val.attr,
+ &integer_modifier.attr,
+ &integer_lower_bound.attr,
+ &integer_upper_bound.attr,
+ &integer_scalar_increment.attr,
+ NULL,
+};
+
+static const struct attribute_group integer_attr_group = {
+ .attrs = integer_attrs,
+};
+
+int alloc_int_data(void)
+{
+ int ret = 0;
+
+ integer_instances_count = get_instance_count(DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
+ integer_data = kzalloc((sizeof(struct integer_data) * integer_instances_count), GFP_KERNEL);
+ if (!integer_data)
+ ret = -ENOMEM;
+ return ret;
+}
+
+/**
+ * populate_enum_data() - Populate all properties of an instance under integer attribute
+ * @integer_obj: ACPI object with integer data
+ * @instance_id: The instance to enumerate
+ * @attr_name_kobj: The parent kernel object
+ **/
+int populate_int_data(union acpi_object *integer_obj, int instance_id,
+ struct kobject *attr_name_kobj)
+{
+ int retval = sysfs_create_group(attr_name_kobj, &integer_attr_group);
+
+ if (retval)
+ goto out;
+
+ mutex_lock(&call_mutex);
+ strncpy_attr(integer_data[instance_id].attribute_name,
+ integer_obj[ATTR_NAME].string.pointer);
+ strncpy_attr(integer_data[instance_id].display_name_language_code,
+ integer_obj[DISPL_NAME_LANG_CODE].string.pointer);
+ strncpy_attr(integer_data[instance_id].display_name,
+ integer_obj[DISPLAY_NAME].string.pointer);
+ integer_data[instance_id].default_value =
+ (uintptr_t)integer_obj[DEFAULT_VAL].string.pointer;
+ integer_data[instance_id].current_value =
+ (uintptr_t)integer_obj[CURRENT_VAL].string.pointer;
+ strncpy_attr(integer_data[instance_id].modifier, integer_obj[MODIFIER].string.pointer);
+ integer_data[instance_id].lower_bound =
+ (uintptr_t)integer_obj[LOWER_BOUND].string.pointer;
+ integer_data[instance_id].upper_bound =
+ (uintptr_t)integer_obj[UPPER_BOUND].string.pointer;
+ integer_data[instance_id].scalar_increment =
+ (uintptr_t)integer_obj[SCALAR_INCR].string.pointer;
+ mutex_unlock(&call_mutex);
+
+out:
+ return retval;
+}
+
+/**
+ * exit_int_attributes() - Clear all attribute data
+ * @kset: The kset to free
+ *
+ * Clears all data allocated for this group of attributes
+ **/
+void exit_int_attributes(struct kset *kset)
+{
+ struct kobject *pos, *next;
+
+ mutex_lock(&list_mutex);
+ list_for_each_entry_safe(pos, next, &kset->list, entry) {
+ sysfs_remove_group(pos, &integer_attr_group);
+ }
+ mutex_unlock(&list_mutex);
+ mutex_lock(&call_mutex);
+ kfree(integer_data);
+ mutex_unlock(&call_mutex);
+}
diff --git a/drivers/platform/x86/dell-wmi-passobj-attributes.c b/drivers/platform/x86/dell-wmi-passobj-attributes.c
new file mode 100644
index 000000000000..d430ecf2387b
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-passobj-attributes.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to password object type attributes under BIOS Password Object GUID for
+ * use with dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+enum po_properties {IS_PASS_SET = 1, MIN_PASS_LEN, MAX_PASS_LEN};
+
+/* kept variable names same as in sysfs file name for sysfs_show macro definition */
+struct po_data {
+ char attribute_name[MAX_BUFF];
+ int is_password_set;
+ int min_password_length;
+ int max_password_length;
+};
+
+static struct po_data *po_data;
+static int po_instances_count;
+get_instance_id(po);
+
+static ssize_t is_password_set_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
+{
+ int instance_id = get_po_instance_id(kobj);
+
+ if (instance_id >= 0) {
+ union acpi_object *obj;
+
+ obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
+ if (!obj)
+ return -AE_ERROR;
+ po_data[instance_id].is_password_set =
+ (uintptr_t)obj->package.elements[IS_PASS_SET].string.pointer;
+ kfree(obj);
+ return sprintf(buf, "%d\n", po_data[instance_id].is_password_set);
+ }
+ return -EIO;
+}
+
+struct kobj_attribute po_is_pass_set =
+ __ATTR_RO(is_password_set);
+
+static ssize_t current_password_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ char *p = memchr(buf, '\n', count);
+ int ret;
+
+ if (p != NULL)
+ *p = '\0';
+ if (strlen(buf) > MAX_BUFF)
+ return -EINVAL;
+
+ ret = set_current_password(kobj->name, buf);
+ return ret ? ret : count;
+}
+
+struct kobj_attribute po_current_password =
+ __ATTR_WO(current_password);
+
+static ssize_t new_password_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ char *p = memchr(buf, '\n', count);
+ int ret;
+
+ if (p != NULL)
+ *p = '\0';
+ if (strlen(buf) > MAX_BUFF)
+ return -EINVAL;
+
+ ret = set_new_password(kobj->name, buf);
+ return ret ? ret : count;
+}
+
+struct kobj_attribute po_new_password =
+ __ATTR_WO(new_password);
+
+attribute_n_property_show(min_password_length, po);
+struct kobj_attribute po_min_pass_length =
+ __ATTR_RO(min_password_length);
+
+attribute_n_property_show(max_password_length, po);
+struct kobj_attribute po_max_pass_length =
+ __ATTR_RO(max_password_length);
+
+static struct attribute *po_attrs[] = {
+ &po_is_pass_set.attr,
+ &po_min_pass_length.attr,
+ &po_max_pass_length.attr,
+ &po_current_password.attr,
+ &po_new_password.attr,
+ NULL,
+};
+
+static const struct attribute_group po_attr_group = {
+ .attrs = po_attrs,
+};
+
+int alloc_po_data(void)
+{
+ int ret = 0;
+
+ po_instances_count = get_instance_count(DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
+ po_data = kzalloc((sizeof(struct po_data) * po_instances_count), GFP_KERNEL);
+ if (!po_data)
+ ret = -ENOMEM;
+ return ret;
+}
+
+/**
+ * populate_po_data() - Populate all properties of an instance under password object attribute
+ * @po_obj: ACPI object with password object data
+ * @instance_id: The instance to enumerate
+ * @attr_name_kobj: The parent kernel object
+ **/
+int populate_po_data(union acpi_object *po_obj, int instance_id, struct kobject *attr_name_kobj)
+{
+ int retval = sysfs_create_group(attr_name_kobj, &po_attr_group);
+
+ if (retval)
+ goto out;
+
+ mutex_lock(&call_mutex);
+ strncpy_attr(po_data[instance_id].attribute_name, po_obj[ATTR_NAME].string.pointer);
+ po_data[instance_id].is_password_set = (uintptr_t)po_obj[IS_PASS_SET].string.pointer;
+ po_data[instance_id].min_password_length = (uintptr_t)po_obj[MIN_PASS_LEN].string.pointer;
+ po_data[instance_id].max_password_length = (uintptr_t) po_obj[MAX_PASS_LEN].string.pointer;
+ mutex_unlock(&call_mutex);
+
+out:
+ return retval;
+}
+
+/**
+ * exit_po_attributes() - Clear all attribute data
+ * @kset: The kset to free
+ *
+ * Clears all data allocated for this group of attributes
+ **/
+void exit_po_attributes(struct kset *kset)
+{
+ struct kobject *pos, *next;
+
+ mutex_lock(&list_mutex);
+ list_for_each_entry_safe(pos, next, &kset->list, entry) {
+ sysfs_remove_group(pos, &po_attr_group);
+ }
+ mutex_unlock(&list_mutex);
+ mutex_lock(&call_mutex);
+ kfree(po_data);
+ mutex_unlock(&call_mutex);
+}
diff --git a/drivers/platform/x86/dell-wmi-passwordattr-interface.c b/drivers/platform/x86/dell-wmi-passwordattr-interface.c
new file mode 100644
index 000000000000..9d7ac36e232f
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-passwordattr-interface.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to SET password methods under BIOS attributes interface GUID
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include <linux/wmi.h>
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+struct wmi_interface_priv {
+ struct list_head list;
+ struct wmi_device *wdev;
+ struct device *child;
+ char current_admin_password[MAX_BUFF];
+ char current_system_password[MAX_BUFF];
+};
+static LIST_HEAD(interface_list);
+
+static inline struct wmi_interface_priv *get_first_interface_priv(void)
+{
+ return list_first_entry_or_null(&interface_list,
+ struct wmi_interface_priv,
+ list);
+}
+
+static int call_password_interface(struct wmi_device *wdev, char *in_args, size_t size)
+{
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ struct acpi_buffer input;
+ union acpi_object *obj;
+ acpi_status status;
+ int ret = -EIO;
+
+ input.length = (acpi_size) size;
+ input.pointer = in_args;
+ status = wmidev_evaluate_method(wdev, 0, 1, &input, &output);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+ obj = (union acpi_object *)output.pointer;
+ if (obj->type == ACPI_TYPE_INTEGER)
+ ret = obj->integer.value;
+
+ kfree(output.pointer);
+ kobject_uevent(&wdev->dev.kobj, KOBJ_CHANGE);
+ return map_wmi_error(ret);
+}
+
+/**
+ * get_current_password() - Get the current stored password value
+ * @password_type: The type of password to store
+ **/
+char *get_current_password(const char *password_type)
+{
+ struct wmi_interface_priv *priv = get_first_interface_priv();
+
+ if (!priv) {
+ pr_err(DRIVER_NAME ": no WMI backend bound");
+ return NULL;
+ }
+ if (strcmp(password_type, "Admin") == 0)
+ return priv->current_admin_password;
+ if (strcmp(password_type, "System") == 0)
+ return priv->current_system_password;
+ dev_err(&priv->wdev->dev, "unknown password type %s", password_type);
+ return NULL;
+}
+
+/**
+ * set_current_password() - Store current password
+ * @password_type: The type of password to store
+ * @current: The current value
+ *
+ * Sets the current value of the password.
+ * This is used for:
+ * - Resetting password
+ * - Basis for any functions requiring password to execute
+ **/
+int set_current_password(const char *password_type, const char *cur)
+{
+ char *current_password = get_current_password(password_type);
+
+ if (!current_password)
+ return -ENODEV;
+ strncpy(current_password, cur, (strlen(cur) + 1));
+ return 0;
+}
+
+/**
+ * set_new_password() - Sets a system admin password
+ * @password_type: The type of password to set
+ * @new: The new password
+ *
+ * Sets the password using plaintext interface
+ **/
+int set_new_password(const char *password_type, const char *new)
+{
+ int ret = -1;
+ int i;
+ u8 *type_len, *old_len, *new_len;
+ char *current_password, *type_value, *old_value, *new_value;
+ size_t security_area_size;
+ size_t string_area_size;
+ size_t buffer_size;
+ struct wmi_interface_priv *priv;
+ char *buffer;
+
+ mutex_lock(&call_mutex);
+ priv = get_first_interface_priv();
+ if (!priv) {
+ ret = -ENODEV;
+ pr_err(DRIVER_NAME ": no WMI backend bound");
+ goto out_close_mutex;
+ }
+ current_password = get_current_password(password_type);
+ if (!current_password) {
+ ret = -ENODEV;
+ goto out_close_mutex;
+ }
+ /* password is set */
+ if (strlen(current_password) > 0)
+ security_area_size = (sizeof(u32) * 2) + strlen(current_password) +
+ strlen(current_password) % 2;
+ /* password not set */
+ else
+ security_area_size = sizeof(u32) * 2;
+ string_area_size = (strlen(password_type) + strlen(current_password) + strlen(new))*2;
+ buffer_size = security_area_size + string_area_size + sizeof(u16) * 3;
+
+ buffer = kzalloc(buffer_size, GFP_KERNEL);
+
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto out_close_mutex;
+ }
+
+ /* build security area */
+ if (strlen(current_password) > 0)
+ populate_security_buffer(buffer, current_password);
+
+ type_len = buffer + security_area_size;
+ type_value = type_len + sizeof(u16);
+ old_len = type_value + strlen(password_type)*2;
+ old_value = old_len + sizeof(u16);
+ new_len = old_value + strlen(current_password)*2;
+ new_value = new_len + sizeof(u16);
+
+ /* turn into UTF16 strings, no NULL terminator */
+ *type_len = strlen(password_type)*2;
+ *old_len = strlen(current_password)*2;
+ *new_len = strlen(new)*2;
+ for (i = 0; i < strlen(password_type); i++)
+ type_value[i*2] = password_type[i];
+ for (i = 0; i < strlen(current_password); i++)
+ old_value[i*2] = current_password[i];
+ for (i = 0; i < strlen(new); i++)
+ new_value[i*2] = new[i];
+
+ ret = call_password_interface(priv->wdev, buffer, buffer_size);
+ /* update current password so commands work after reset */
+ if (!ret)
+ ret = set_current_password(password_type, new);
+ /* explain to user the detailed failure reason */
+ else if (ret == -EOPNOTSUPP)
+ dev_err(&priv->wdev->dev, "admin password must be configured");
+ else if (ret == -EACCES)
+ dev_err(&priv->wdev->dev, "invalid password");
+ kfree(buffer);
+
+out_close_mutex:
+ mutex_unlock(&call_mutex);
+
+ return ret;
+}
+
+static int dell_wmi_bios_attr_pass_interface_probe(struct wmi_device *wdev, const void *context)
+{
+ struct wmi_interface_priv *priv;
+
+ priv = devm_kzalloc(&wdev->dev, sizeof(struct wmi_interface_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->wdev = wdev;
+ dev_set_drvdata(&wdev->dev, priv);
+ mutex_lock(&list_mutex);
+ list_add_tail(&priv->list, &interface_list);
+ mutex_unlock(&list_mutex);
+ return 0;
+}
+
+static int dell_wmi_bios_attr_pass_interface_remove(struct wmi_device *wdev)
+{
+ struct wmi_interface_priv *priv = dev_get_drvdata(&wdev->dev);
+
+ mutex_lock(&call_mutex);
+ mutex_lock(&list_mutex);
+ list_del(&priv->list);
+ mutex_unlock(&list_mutex);
+ mutex_unlock(&call_mutex);
+ return 0;
+}
+
+static const struct wmi_device_id dell_wmi_bios_attr_pass_interface_id_table[] = {
+ { .guid_string = DELL_WMI_BIOS_PASSWORD_INTERFACE_GUID },
+ { },
+};
+static struct wmi_driver dell_wmi_bios_attr_pass_interface_driver = {
+ .driver = {
+ .name = DRIVER_NAME"-password"
+ },
+ .probe = dell_wmi_bios_attr_pass_interface_probe,
+ .remove = dell_wmi_bios_attr_pass_interface_remove,
+ .id_table = dell_wmi_bios_attr_pass_interface_id_table,
+};
+
+int init_dell_wmi_bios_attr_pass_interface(void)
+{
+ return wmi_driver_register(&dell_wmi_bios_attr_pass_interface_driver);
+}
+
+void exit_dell_wmi_bios_attr_pass_interface(void)
+{
+ wmi_driver_unregister(&dell_wmi_bios_attr_pass_interface_driver);
+}
+
+MODULE_DEVICE_TABLE(wmi, dell_wmi_bios_attr_pass_interface_id_table);
diff --git a/drivers/platform/x86/dell-wmi-string-attributes.c b/drivers/platform/x86/dell-wmi-string-attributes.c
new file mode 100644
index 000000000000..562d09055dd1
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-string-attributes.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Functions corresponding to string type attributes under BIOS String GUID for use with
+ * dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+enum string_properties {MIN_LEN = 6, MAX_LEN};
+
+/* kept variable names same as in sysfs file name for sysfs_show macro definition */
+struct str_data {
+ char attribute_name[MAX_BUFF];
+ char display_name_language_code[MAX_BUFF];
+ char display_name[MAX_BUFF];
+ char default_value[MAX_BUFF];
+ char current_value[MAX_BUFF];
+ char modifier[MAX_BUFF];
+ int min_length;
+ int max_length;
+};
+
+static struct str_data *str_data;
+static int str_instances_count;
+get_instance_id(str);
+
+static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
+{
+ int instance_id;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ instance_id = get_str_instance_id(kobj);
+ if (instance_id >= 0) {
+ union acpi_object *obj;
+
+ obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
+ if (!obj)
+ return -AE_ERROR;
+ strncpy_attr(str_data[instance_id].current_value,
+ obj->package.elements[CURRENT_VAL].string.pointer);
+ kfree(obj);
+ return sprintf(buf, "%s\n", str_data[instance_id].current_value);
+ }
+ return -EIO;
+}
+
+/**
+ * validate_str_input() - Validate input of current_value against min and max lengths
+ * @instance_id: The instance on which input is validated
+ * @buf: Input value
+ **/
+int validate_str_input(int instance_id, const char *buf)
+{
+ int in_len = strlen(buf);
+
+ if ((in_len >= str_data[instance_id].min_length) &&
+ (in_len <= str_data[instance_id].max_length))
+ return 0;
+
+ return -EINVAL;
+}
+
+attribute_s_property_show(display_name_language_code, str);
+static struct kobj_attribute str_displ_langcode =
+ __ATTR_RO(display_name_language_code);
+
+attribute_s_property_show(display_name, str);
+struct kobj_attribute str_displ_name =
+ __ATTR_RO(display_name);
+
+attribute_s_property_show(default_value, str);
+struct kobj_attribute str_default_val =
+ __ATTR_RO(default_value);
+
+attribute_property_store(current_value, str);
+struct kobj_attribute str_current_val =
+ __ATTR_RW(current_value);
+
+attribute_s_property_show(modifier, str);
+struct kobj_attribute str_modifier =
+ __ATTR_RO(modifier);
+
+attribute_n_property_show(min_length, str);
+struct kobj_attribute str_min_length =
+ __ATTR_RO(min_length);
+
+attribute_n_property_show(max_length, str);
+struct kobj_attribute str_max_length =
+ __ATTR_RO(max_length);
+
+static struct attribute *str_attrs[] = {
+ &str_displ_langcode.attr,
+ &str_displ_name.attr,
+ &str_default_val.attr,
+ &str_current_val.attr,
+ &str_modifier.attr,
+ &str_min_length.attr,
+ &str_max_length.attr,
+ NULL,
+};
+
+static const struct attribute_group str_attr_group = {
+ .attrs = str_attrs,
+};
+
+int alloc_str_data(void)
+{
+ int ret = 0;
+
+ str_instances_count = get_instance_count(DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
+ str_data = kzalloc((sizeof(struct str_data) * str_instances_count), GFP_KERNEL);
+ if (!str_data)
+ ret = -ENOMEM;
+ return ret;
+}
+
+/**
+ * populate_enum_data() - Populate all properties of an instance under string attribute
+ * @str_obj: ACPI object with integer data
+ * @instance_id: The instance to enumerate
+ * @attr_name_kobj: The parent kernel object
+ **/
+int populate_str_data(union acpi_object *str_obj, int instance_id, struct kobject *attr_name_kobj)
+{
+ int retval = sysfs_create_group(attr_name_kobj, &str_attr_group);
+
+ if (retval)
+ goto out;
+
+ mutex_lock(&call_mutex);
+ strncpy_attr(str_data[instance_id].attribute_name, str_obj[ATTR_NAME].string.pointer);
+ strncpy_attr(str_data[instance_id].display_name_language_code,
+ str_obj[DISPL_NAME_LANG_CODE].string.pointer);
+ strncpy_attr(str_data[instance_id].display_name, str_obj[DISPLAY_NAME].string.pointer);
+ strncpy_attr(str_data[instance_id].default_value, str_obj[DEFAULT_VAL].string.pointer);
+ strncpy_attr(str_data[instance_id].current_value, str_obj[CURRENT_VAL].string.pointer);
+ strncpy_attr(str_data[instance_id].modifier, str_obj[MODIFIER].string.pointer);
+ str_data[instance_id].min_length = (uintptr_t)str_obj[MIN_LEN].string.pointer;
+ str_data[instance_id].max_length = (uintptr_t) str_obj[MAX_LEN].string.pointer;
+ mutex_unlock(&call_mutex);
+
+out:
+ return retval;
+}
+
+/**
+ * exit_str_attributes() - Clear all attribute data
+ * @kset: The kset to free
+ *
+ * Clears all data allocated for this group of attributes
+ **/
+void exit_str_attributes(struct kset *kset)
+{
+ struct kobject *pos, *next;
+
+ mutex_lock(&list_mutex);
+ list_for_each_entry_safe(pos, next, &kset->list, entry) {
+ sysfs_remove_group(pos, &str_attr_group);
+ }
+ mutex_unlock(&list_mutex);
+ mutex_lock(&call_mutex);
+ kfree(str_data);
+ mutex_unlock(&call_mutex);
+}
diff --git a/drivers/platform/x86/dell-wmi-sysman-attributes.c b/drivers/platform/x86/dell-wmi-sysman-attributes.c
new file mode 100644
index 000000000000..485545ab6c8b
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-sysman-attributes.c
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common methods for use with dell-wmi-sysman
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/wmi.h>
+#include "dell-wmi-sysman-attributes.h"
+
+static DEFINE_MUTEX(call_mutex);
+static DEFINE_MUTEX(list_mutex);
+
+#define MAX_TYPES 4
+
+static struct platform_device *platform_device;
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+/* attribute directory under platform dev */
+struct kset *main_dir_kset;
+/* subtypes of attributes */
+struct kset *type_dir_kset[MAX_TYPES];
+
+/* reset bios to defaults */
+static const char * const reset_types[] = {"builtinsafe", "lastknowngood", "factory", "custom"};
+static int reset_option = -1;
+
+/**
+ * populate_security_buffer() - builds a security buffer for authentication scheme
+ * @buffer: the buffer to populate
+ * @authentication: the authentication content
+ *
+ * Currently only supported type is PLAIN TEXT
+ **/
+void populate_security_buffer(char *buffer, char *authentication)
+{
+ u32 *sectype = (u32 *) buffer;
+ u32 *seclen = sectype + 1;
+ char *auth = buffer + sizeof(u32)*2;
+ /* plain text */
+ *sectype = 1;
+ *seclen = strlen(authentication);
+ strncpy(auth, authentication, *seclen);
+}
+
+/**
+ * map_wmi_error() - map errors from WMI methods to kernel error codes
+ **/
+int map_wmi_error(int error_code)
+{
+ switch (error_code) {
+ case 0:
+ /* success */
+ return 0;
+ case 1:
+ /* failed */
+ return -EIO;
+ case 2:
+ /* invalid parameter */
+ return -EINVAL;
+ case 3:
+ /* access denied */
+ return -EACCES;
+ case 4:
+ /* not supported */
+ return -EOPNOTSUPP;
+ case 5:
+ /* memory error */
+ return -ENOMEM;
+ case 6:
+ /* protocol error */
+ return -EPROTO;
+ }
+ /* unspecified error */
+ return -EIO;
+}
+
+/**
+ * reset_bios_show() - sysfs implementaton for read reset_bios
+ * @kobj: Kernel object for this attribute
+ * @attr: Kernel object attribute
+ * @buf: The buffer to display to userspace
+ **/
+static ssize_t reset_bios_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
+{
+ int i;
+ char *start = buf;
+
+ for (i = 0; i < MAX_TYPES; i++) {
+ if (i == reset_option)
+ buf += sprintf(buf, "[%s] ", reset_types[i]);
+ else
+ buf += sprintf(buf, "%s ", reset_types[i]);
+ }
+ buf += sprintf(buf, "\n");
+ return buf-start;
+}
+
+/**
+ * reset_bios_store() - sysfs implementaton for write reset_bios
+ * @kobj: Kernel object for this attribute
+ * @attr: Kernel object attribute
+ * @buf: The buffer from userspace
+ * @count: the size of the buffer from userspace
+ **/
+static ssize_t reset_bios_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf, size_t count)
+{
+ int len, ret, i;
+ int type = -1;
+ char *p;
+
+ p = memchr(buf, '\n', count);
+ if (p != NULL)
+ *p = '\0';
+ len = p ? p - buf : count;
+
+ for (i = 0; i < MAX_TYPES; i++) {
+ if (len == strlen(reset_types[i])
+ && !strncmp(buf, reset_types[i], len)) {
+ type = i;
+ break;
+ }
+ }
+
+ if (type < 0 || type >= MAX_TYPES) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = set_bios_defaults(type);
+ dev_dbg(&platform_device->dev, "reset all attributes request type %d: %d", type, ret);
+ if (ret) {
+ ret = -EINVAL;
+ } else {
+ reset_option = type;
+ ret = count;
+ }
+
+out:
+ return ret;
+}
+
+/**
+ * pending_reboot_show() - sysfs implementaton for read pending_reboot
+ * @kobj: Kernel object for this attribute
+ * @attr: Kernel object attribute
+ * @buf: The buffer to display to userspace
+ *
+ * Stores default value as 0
+ * When current_value is changed this attribute is set to 1 to notify reboot may be required
+ **/
+static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", get_pending_changes());
+}
+
+static struct kobj_attribute reset_bios = __ATTR_RW(reset_bios);
+static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot);
+
+
+/**
+ * create_reset_bios() - Creates reset_bios and pending_reboot attributes
+ **/
+static int create_reset_bios(void)
+{
+ int ret = sysfs_create_file(&main_dir_kset->kobj, &reset_bios.attr);
+
+ if (ret) {
+ dev_dbg(&platform_device->dev, "could not create reset_bios file");
+ return ret;
+ }
+
+ ret = sysfs_create_file(&main_dir_kset->kobj, &pending_reboot.attr);
+ if (ret) {
+ dev_dbg(&platform_device->dev, "could not create changing_pending_reboot file");
+ sysfs_remove_file(&main_dir_kset->kobj, &reset_bios.attr);
+ }
+ return ret;
+}
+
+static void release_reset_bios_data(void)
+{
+ sysfs_remove_file(&main_dir_kset->kobj, &reset_bios.attr);
+ sysfs_remove_file(&main_dir_kset->kobj, &pending_reboot.attr);
+}
+
+static ssize_t kobj_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct kobj_attribute *kattr;
+ ssize_t ret = -EIO;
+
+ kattr = container_of(attr, struct kobj_attribute, attr);
+ if (kattr->show)
+ ret = kattr->show(kobj, kattr, buf);
+ return ret;
+}
+
+static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kobj_attribute *kattr;
+ ssize_t ret = -EIO;
+
+ kattr = container_of(attr, struct kobj_attribute, attr);
+ if (kattr->store)
+ ret = kattr->store(kobj, kattr, buf, count);
+ return ret;
+}
+
+const struct sysfs_ops kobj_sysfs_ops = {
+ .show = kobj_attr_show,
+ .store = kobj_attr_store,
+};
+
+static void attr_name_release(struct kobject *kobj)
+{
+ kfree(kobj);
+}
+
+static struct kobj_type attr_name_ktype = {
+ .release = attr_name_release,
+ .sysfs_ops = &kobj_sysfs_ops,
+};
+
+/**
+ * strncpy_attr - Copy a length-limited, NULL-terminated string with bound checks
+ * @dest: Where to copy the string to
+ * @src: Where to copy the string from
+ **/
+void strncpy_attr(char *dest, char *src)
+{
+ size_t len = strlen(src) + 1;
+
+ if (len > 1 && len < MAX_BUFF)
+ strncpy(dest, src, len);
+}
+
+/**
+ * get_wmiobj_pointer() - Get Content of WMI block for particular instance
+ * @instance_id: WMI instance ID
+ * @guid_string: WMI GUID (in str form)
+ *
+ * Fetches the content for WMI block (instance_id) under GUID (guid_string)
+ * Caller must kfree the return
+ **/
+union acpi_object *get_wmiobj_pointer(int instance_id, const char *guid_string)
+{
+ acpi_status status;
+ struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ status = wmi_query_block(guid_string, instance_id, &out);
+
+ return ACPI_SUCCESS(status) ? (union acpi_object *)out.pointer : NULL;
+}
+
+/**
+ * get_instance_count() - Compute total number of instances under guid_string
+ * @guid_string: WMI GUID (in string form)
+ **/
+int get_instance_count(const char *guid_string)
+{
+ int i = 0;
+ union acpi_object *wmi_obj = NULL;
+
+ do {
+ kfree(wmi_obj);
+ wmi_obj = get_wmiobj_pointer(i, guid_string);
+ i++;
+ } while (wmi_obj);
+
+ return (i-1);
+}
+
+/**
+ * alloc_attributes_data() - Allocate attributes data for a particular type
+ * @attr_type: Attribute type to allocate
+ **/
+static int alloc_attributes_data(int attr_type)
+{
+ int retval = 0;
+ char *type[MAX_TYPES] = {"enumeration", "integer", "string", "password"};
+
+ type_dir_kset[attr_type] = kset_create_and_add(type[attr_type], NULL, &main_dir_kset->kobj);
+ if (!type_dir_kset[attr_type])
+ goto err_bios_attr;
+
+ switch (attr_type) {
+ case ENUM:
+ retval = alloc_enum_data();
+ break;
+ case INT:
+ retval = alloc_int_data();
+ break;
+ case STR:
+ retval = alloc_str_data();
+ break;
+ case PO:
+ retval = alloc_po_data();
+ break;
+ default:
+ break;
+ }
+
+ goto out;
+
+err_bios_attr:
+ kset_unregister(main_dir_kset);
+
+out:
+ return retval;
+}
+
+/**
+ * destroy_attribute_objs() - Free a kset of kobjects
+ * @kset: The kset to destroy
+ *
+ * Fress kobjects created for each attribute_name under attribute type kset
+ **/
+static void destroy_attribute_objs(struct kset *kset)
+{
+ struct kobject *pos, *next;
+
+ mutex_lock(&list_mutex);
+ list_for_each_entry_safe(pos, next, &kset->list, entry) {
+ kobject_put(pos);
+ }
+ mutex_unlock(&list_mutex);
+}
+
+/**
+ * release_attributes_data() - Clean-up all sysfs directories and files created
+ **/
+static void release_attributes_data(void)
+{
+ release_reset_bios_data();
+
+ exit_enum_attributes(type_dir_kset[ENUM]);
+ exit_int_attributes(type_dir_kset[INT]);
+ exit_str_attributes(type_dir_kset[STR]);
+ exit_po_attributes(type_dir_kset[PO]);
+
+ mutex_lock(&call_mutex);
+ if (main_dir_kset) {
+ int i;
+
+ /* unregister all 4 types ENUM,INT,STR and PO */
+ for (i = ENUM; i <= PO; i++) {
+ destroy_attribute_objs(type_dir_kset[i]);
+ kset_unregister(type_dir_kset[i]);
+ }
+ kset_unregister(main_dir_kset);
+ }
+ mutex_unlock(&call_mutex);
+}
+
+/**
+ * init_bios_attributes() - Initialize all attributes for a type
+ * @attr_type: The attribute type to initialize
+ * @guid: The WMI GUID associated with this type to initialize
+ *
+ * Initialiaze all 4 types of attributes enumeration, integer, string and password object.
+ * Populates each attrbute typ's respective properties under sysfs files
+ **/
+static int init_bios_attributes(int attr_type, const char *guid)
+{
+ union acpi_object *obj = NULL;
+ union acpi_object *elements;
+ int retval = 0;
+ int instance_id = 0;
+ struct kobject *attr_name_kobj; //individual attribute names
+
+ retval = alloc_attributes_data(attr_type);
+ if (retval)
+ return retval;
+ obj = get_wmiobj_pointer(instance_id, guid);
+ if (!obj)
+ return -ENODEV;
+ elements = obj->package.elements;
+
+ while (elements) {
+ /* sanity checking */
+ if (strlen(elements[ATTR_NAME].string.pointer) == 0) {
+ dev_dbg(&platform_device->dev, "empty attribute found");
+ goto nextobj;
+ }
+ if (kset_find_obj(type_dir_kset[attr_type], elements[ATTR_NAME].string.pointer)) {
+ dev_dbg(&platform_device->dev, "duplicate attribute name found - %s",
+ elements[ATTR_NAME].string.pointer);
+ goto nextobj;
+ }
+
+ /* build attribute */
+ attr_name_kobj = kzalloc(sizeof(*attr_name_kobj), GFP_KERNEL);
+ if (!attr_name_kobj)
+ goto err_attr_init;
+
+ attr_name_kobj->kset = type_dir_kset[attr_type];
+
+ retval = kobject_init_and_add(attr_name_kobj, &attr_name_ktype, NULL, "%s",
+ elements[ATTR_NAME].string.pointer);
+ if (retval) {
+ kobject_put(attr_name_kobj);
+ goto err_attr_init;
+ }
+
+ /* enumerate all of this attribute */
+ switch (attr_type) {
+ case ENUM:
+ retval = populate_enum_data(elements, instance_id, attr_name_kobj);
+ break;
+ case INT:
+ retval = populate_int_data(elements, instance_id, attr_name_kobj);
+ break;
+ case STR:
+ retval = populate_str_data(elements, instance_id, attr_name_kobj);
+ break;
+ case PO:
+ retval = populate_po_data(elements, instance_id, attr_name_kobj);
+ break;
+ default:
+ break;
+ }
+
+ if (retval) {
+ dev_dbg(&platform_device->dev, "failed to populate %s",
+ elements[ATTR_NAME].string.pointer);
+ goto err_attr_init;
+ }
+
+nextobj:
+ kfree(obj);
+ instance_id++;
+ obj = get_wmiobj_pointer(instance_id, guid);
+ elements = obj ? obj->package.elements : NULL;
+ }
+
+ goto out;
+
+err_attr_init:
+ release_attributes_data();
+ kfree(obj);
+out:
+ return retval;
+}
+
+static int __init init_dell_bios_attrib_wmi(void)
+{
+ int ret = 0;
+
+ if (!dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "Dell System", NULL) &&
+ !dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "www.dell.com", NULL)) {
+ pr_err("Unable to run on non-Dell system\n");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&platform_driver);
+ if (ret)
+ goto fail_platform_driver;
+
+ platform_device = platform_device_alloc(DRIVER_NAME, -1);
+ if (!platform_device) {
+ ret = -ENOMEM;
+ goto fail_platform_device_alloc;
+ }
+
+ ret = platform_device_add(platform_device);
+ if (ret)
+ goto fail_platform_device_add;
+
+ main_dir_kset = kset_create_and_add("attributes", NULL, &platform_device->dev.kobj);
+ if (!main_dir_kset) {
+ ret = -ENOMEM;
+ goto fail_platform_device_add;
+ }
+
+ ret = init_dell_wmi_bios_attr_set_interface();
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to initialize set interface");
+ goto fail_kset;
+ }
+
+ ret = init_dell_wmi_bios_attr_pass_interface();
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to initialize pass interface");
+ goto fail_set_interface;
+ }
+
+ ret = create_reset_bios();
+ if (ret) {
+ dev_dbg(&platform_device->dev, "could not create reset BIOS attribute");
+ goto fail_pass_interface;
+ }
+
+ ret = init_bios_attributes(ENUM, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to populate enumeration type attributes");
+ goto fail_create_group;
+ }
+
+ ret = init_bios_attributes(INT, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to populate integer type attributes");
+ goto fail_create_group;
+ }
+
+ ret = init_bios_attributes(STR, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to populate string type attributes");
+ goto fail_create_group;
+ }
+
+ ret = init_bios_attributes(PO, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
+ if (ret) {
+ dev_dbg(&platform_device->dev, "failed to populate pass object type attributes");
+ goto fail_create_group;
+ }
+
+ return 0;
+
+fail_create_group:
+ release_attributes_data();
+ platform_device_del(platform_device);
+
+fail_pass_interface:
+ exit_dell_wmi_bios_attr_pass_interface();
+
+fail_set_interface:
+ exit_dell_wmi_bios_attr_set_interface();
+
+fail_kset:
+ kset_unregister(main_dir_kset);
+
+fail_platform_device_add:
+ platform_device_put(platform_device);
+
+fail_platform_device_alloc:
+ platform_driver_unregister(&platform_driver);
+
+fail_platform_driver:
+ return ret;
+}
+
+static void __exit exit_dell_bios_attrib_wmi(void)
+{
+ release_attributes_data();
+ mutex_lock(&call_mutex);
+ exit_dell_wmi_bios_attr_set_interface();
+ exit_dell_wmi_bios_attr_pass_interface();
+ if (platform_device) {
+ platform_device_unregister(platform_device);
+ platform_driver_unregister(&platform_driver);
+ }
+ mutex_unlock(&call_mutex);
+}
+
+module_init(init_dell_bios_attrib_wmi);
+module_exit(exit_dell_bios_attrib_wmi);
+
+MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>");
+MODULE_AUTHOR("Prasanth Ksr <prasanth.ksr@dell.com>");
+MODULE_AUTHOR("Divya Bharathi <divya.bharathi@dell.com>");
+MODULE_DESCRIPTION("Dell platform setting control interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-wmi-sysman-attributes.h b/drivers/platform/x86/dell-wmi-sysman-attributes.h
new file mode 100644
index 000000000000..bb5053b91ec7
--- /dev/null
+++ b/drivers/platform/x86/dell-wmi-sysman-attributes.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Definitions for kernel modules using Dell WMI System Management Driver
+ *
+ * Copyright (c) 2020 Dell Inc.
+ */
+
+#ifndef _DELL_WMI_BIOS_ATTR_H_
+#define _DELL_WMI_BIOS_ATTR_H_
+
+#include <linux/wmi.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/capability.h>
+
+#define DRIVER_NAME "dell-wmi-sysman"
+#define MAX_BUFF 512
+
+#define DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF5"
+#define DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BFA"
+#define DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF9"
+#define DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID "0894B8D6-44A6-4719-97D7-6AD24108BFD4"
+#define DELL_WMI_BIOS_ATTRIBUTES_INTERFACE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF4"
+#define DELL_WMI_BIOS_PASSWORD_INTERFACE_GUID "70FE8229-D03B-4214-A1C6-1F884B1A892A"
+
+enum { ENUM, INT, STR, PO };
+
+enum {
+ ATTR_NAME,
+ DISPL_NAME_LANG_CODE,
+ DISPLAY_NAME,
+ DEFAULT_VAL,
+ CURRENT_VAL,
+ MODIFIER
+};
+
+#define get_instance_id(type) \
+int get_##type##_instance_id(struct kobject *kobj) \
+{ \
+ int i; \
+ for (i = 0; i <= type##_instances_count; i++) { \
+ if (!(strcmp(kobj->name, type##_data[i].attribute_name))) \
+ return i; \
+ } \
+ return -EIO; \
+}
+
+#define attribute_s_property_show(name, type) \
+static ssize_t name##_show(struct kobject *kobj, struct kobj_attribute *attr, \
+ char *buf) \
+{ \
+ int i = get_##type##_instance_id(kobj); \
+ if (i >= 0) \
+ return sprintf(buf, "%s\n", type##_data[i].name); \
+ return 0; \
+}
+
+#define attribute_n_property_show(name, type) \
+static ssize_t name##_show(struct kobject *kobj, struct kobj_attribute *attr, \
+ char *buf) \
+{ \
+ int i = get_##type##_instance_id(kobj); \
+ if (i >= 0) \
+ return sprintf(buf, "%d\n", type##_data[i].name); \
+ return 0; \
+}
+
+#define attribute_property_store(curr_val, type) \
+static ssize_t curr_val##_store(struct kobject *kobj, \
+ struct kobj_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ char *p = memchr(buf, '\n', count); \
+ int ret = -EIO; \
+ int i; \
+ \
+ if (p != NULL) \
+ *p = '\0'; \
+ i = get_##type##_instance_id(kobj); \
+ if (i >= 0) \
+ ret = validate_##type##_input(i, buf); \
+ if (!ret) \
+ ret = set_attribute(kobj->name, buf); \
+ return ret ? ret : count; \
+}
+
+union acpi_object *get_wmiobj_pointer(int instance_id, const char *guid_string);
+int get_instance_count(const char *guid_string);
+void strncpy_attr(char *dest, char *src);
+
+int populate_enum_data(union acpi_object *enumeration_obj, int instance_id,
+ struct kobject *attr_name_kobj);
+int alloc_enum_data(void);
+void exit_enum_attributes(struct kset *kset);
+
+int populate_int_data(union acpi_object *integer_obj, int instance_id,
+ struct kobject *attr_name_kobj);
+int alloc_int_data(void);
+void exit_int_attributes(struct kset *kset);
+
+int populate_str_data(union acpi_object *str_obj, int instance_id, struct kobject *attr_name_kobj);
+int alloc_str_data(void);
+void exit_str_attributes(struct kset *kset);
+
+int populate_po_data(union acpi_object *po_obj, int instance_id, struct kobject *attr_name_kobj);
+int alloc_po_data(void);
+void exit_po_attributes(struct kset *kset);
+
+int set_attribute(const char *a_name, const char *a_value);
+int set_bios_defaults(u8 defType);
+
+void exit_dell_wmi_bios_attr_set_interface(void);
+int init_dell_wmi_bios_attr_set_interface(void);
+bool get_pending_changes(void);
+int map_wmi_error(int error_code);
+void populate_security_buffer(char *buffer, char *authentication);
+
+char *get_current_password(const char *password_type);
+int set_current_password(const char *password_type, const char *cur);
+int set_new_password(const char *password_type, const char *new);
+int init_dell_wmi_bios_attr_pass_interface(void);
+void exit_dell_wmi_bios_attr_pass_interface(void);
+
+#endif
--
2.25.1
\
 
 \ /
  Last update: 2020-07-30 16:31    [W:0.282 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site