lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [net-next v5 PATCH 0/7] Add PRP driver
From
Date
Hi Dave,

On 7/27/20 3:21 PM, David Miller wrote:
> From: Murali Karicheri <m-karicheri2@ti.com>
> Date: Wed, 22 Jul 2020 10:40:15 -0400
>
>> This series is dependent on the following patches sent out to
>> netdev list. All (1-3) are already merged to net/master as of
>> sending this, but not on the net-next master branch. So need
>> to apply them to net-next before applying this series. v3 of
>> the iproute2 patches can be merged to work with this series
>> as there are no updates since then.
>>
>> [1] https://marc.info/?l=linux-netdev&m=159526378131542&w=2
>> [2] https://marc.info/?l=linux-netdev&m=159499772225350&w=2
>> [3] https://marc.info/?l=linux-netdev&m=159499772425352&w=2
>>
>> This series adds support for Parallel Redundancy Protocol (PRP)
>> in the Linux HSR driver as defined in IEC-62439-3. PRP Uses a
>> Redundancy Control Trailer (RCT) the format of which is
>> similar to HSR Tag. This is used for implementing redundancy.
> ...
>
> Series applied to net-next, thank you.
>
Thanks for applying this series. Just wondering who will
pick up the v3 of the iproute2 patch I have posted to go
with this.

https://marc.info/?l=linux-netdev&m=159499933326135&w=2

I will reply to that thread as well.

Thanks
--
Murali Karicheri
Texas Instruments

\
 
 \ /
  Last update: 2020-07-30 15:42    [W:0.121 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site