lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil
Date
IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.

This series is based on Govind's
"[v8] Add non PAS wcss Q6 support for QCS404"

changes since v6:
- Rebased on top of the above mentioned dependant patch series

changes since v5:
- Rebased on top of linux-5.8-rc3

changes since v4:
- Rebased patch 8

changes since v3:
- In patch 10, Added release_firmware to free up
memory requested for m3 firmware.

changes since v2:
- In patch 5, Added a driver data 'bcr_reset_required'
to select if bcr reset is required
- In patch 10, Removed syscon implementation and moved
to mailbox framework to access APCS IPC

changes since v1:
- In patch 10, Addressed minor review comments.

Gokul Sriram Palanisamy (9):
remoteproc: qcom: Add PRNG proxy clock
remoteproc: qcom: Add secure PIL support
remoteproc: qcom: Add support for split q6 + m3 wlan firmware
remoteproc: qcom: Add ssr subdevice identifier
remoteproc: qcom: Update regmap offsets for halt register
dt-bindings: clock: qcom: Add reset for WCSSAON
clk: qcom: Add WCSSAON reset
arm64: dts: Add support for scm on IPQ8074 SoCs
arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

arch/arm64/boot/dts/qcom/ipq8074.dtsi | 127 +++++++++++++++++++++
drivers/clk/qcom/gcc-ipq8074.c | 1 +
drivers/remoteproc/qcom_q6v5_wcss.c | 162 +++++++++++++++++++++------
include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
4 files changed, 259 insertions(+), 32 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2020-07-30 14:29    [W:0.042 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site