lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] Input: snvs_pwrkey - only IRQ_HANDLED for our own events
Hi Dmitry,

On 20-07-29 23:06, Dmitry Torokhov wrote:
> Hi Marco,
>
> On Wed, Jul 29, 2020 at 09:55:13AM +0200, Marco Felsch wrote:
> > Hi,
> >
> > On 20-07-23 10:43, Horia Geantă wrote:
> > > From: André Draszik <git@andred.net>
> > >
> > > The snvs_pwrkey shares the SNVS LPSR status register with the snvs_rtc.
> > >
> > > This driver here should only return IRQ_HANDLED if the status register
> > > indicates that the event we're handling in the irq handler was genuinely
> > > intended for this driver. Otheriwse the interrupt subsystem will
> > > assume the interrupt was handled successfully even though it wasn't
> > > at all.
> >
> > After checking the RM and the imx6qdl.dtsi I'm not very sure that this
> > is right since the snvs-powerkey has a seperate irq-line. So we can be
> > sure that this irq is for us. If this is the case we don't need to check
> > the SNVS_LPSR_REG instead we only need to clear it.
>
> Wouldn't we want to know if for some reason we get spurious interrupts?

We could check the bit at the very begin of the IRQ and return early but
according the RM this should never happen. Anyway you're right HW is
never bug free.

Regards,
Marco

> Thanks.
>
> --
> Dmitry

\
 
 \ /
  Last update: 2020-07-30 11:00    [W:0.095 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site