lkml.org 
[lkml]   [2020]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH V3 3/3] pci: imx: Select RESET_IMX7 by default
From
Date
Hi Anson,

On Thu, 2020-07-30 at 02:11 +0000, Anson Huang wrote:
> Hi, Philipp/Rob
>
> > Subject: Re: [PATCH V3 3/3] pci: imx: Select RESET_IMX7 by default
> >
> > On Wed, 2020-07-29 at 09:26 -0600, Rob Herring wrote:
> > > On Mon, Jul 20, 2020 at 8:26 AM Anson Huang <Anson.Huang@nxp.com>
> > wrote:
> > > > i.MX7 reset driver now supports module build and it is no longer
> > > > built in by default, so i.MX PCI driver needs to select it
> > > > explicitly due to it is NOT supporting loadable module currently.
> > > >
> > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > > > ---
> > > > No change.
> > > > ---
> > > > drivers/pci/controller/dwc/Kconfig | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/Kconfig
> > > > b/drivers/pci/controller/dwc/Kconfig
> > > > index 044a376..bcf63ce 100644
> > > > --- a/drivers/pci/controller/dwc/Kconfig
> > > > +++ b/drivers/pci/controller/dwc/Kconfig
> > > > @@ -90,6 +90,7 @@ config PCI_EXYNOS
> > > >
> > > > config PCI_IMX6
> > > > bool "Freescale i.MX6/7/8 PCIe controller"
> > > > + select RESET_IMX7
> > >
> > > This will break as select will not cause all of RESET_IMX7's
> > > dependencies to be met. It also doesn't scale. Are you going to do the
> > > same thing for clocks, pinctrl, gpio, etc.?
> > >
> > > You should make the PCI driver work as a module.
> >
> > Oh, also PCI_IMX6 is used on (surprise) i.MX6, which doesn't need
> > RESET_IMX7 at all.
> >
> > How about hiding the RESET_IMX7 option and setting it default y if
> > PCI_IMX6 is enabled, as an interim solution?
>
> Like below, RESET_IMX7 is already default y when SOC_IMX7D, now added PCI_IMX6,
> let me know if it is OK for you, then I will send new patch for review.
>
> +++ b/drivers/reset/Kconfig
> @@ -68,7 +68,7 @@ config RESET_IMX7
> tristate "i.MX7/8 Reset Driver"

I was thinking something like

tristate "i.MX7/8 Reset Driver" if COMPILE_TEST || !PCI_IMX6

> depends on HAS_IOMEM
> depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
> - default y if SOC_IMX7D
> + default y if (SOC_IMX7D || PCI_IMX6)

Yes, although without the above I think it could still be disabled
manually or via oldconfig.

regards
Philipp

\
 
 \ /
  Last update: 2020-07-30 09:20    [W:0.063 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site