lkml.org 
[lkml]   [2020]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 06/11] sundance: use generic power management
On 7/1/20, Vaibhav Gupta <vaibhavgupta40@gmail.com> wrote:
> With legacy PM, drivers themselves were responsible for managing the
> device's power states and takes care of register states.
>
> After upgrading to the generic structure, PCI core will take care of
> required tasks and drivers should do only device-specific operations.
>
> Thus, there is no need to call the PCI helper functions like
> pci_enable/disable_device(), pci_save/restore_sate() and
> pci_set_power_state().
>
> Compile-tested only.
>
> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>

Should be fine. I'll try to test it in the upcoming weekend

> ---
> drivers/net/ethernet/dlink/sundance.c | 27 ++++++++-------------------
> 1 file changed, 8 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/ethernet/dlink/sundance.c
> b/drivers/net/ethernet/dlink/sundance.c
> index dc566fcc3ba9..ca97e321082d 100644
> --- a/drivers/net/ethernet/dlink/sundance.c
> +++ b/drivers/net/ethernet/dlink/sundance.c
> @@ -1928,11 +1928,9 @@ static void sundance_remove1(struct pci_dev *pdev)
> }
> }
>
> -#ifdef CONFIG_PM
> -
> -static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state)
> +static int __maybe_unused sundance_suspend(struct device *dev_d)
> {
> - struct net_device *dev = pci_get_drvdata(pci_dev);
> + struct net_device *dev = dev_get_drvdata(dev_d);
> struct netdev_private *np = netdev_priv(dev);
> void __iomem *ioaddr = np->base;
>
> @@ -1942,30 +1940,24 @@ static int sundance_suspend(struct pci_dev *pci_dev,
> pm_message_t state)
> netdev_close(dev);
> netif_device_detach(dev);
>
> - pci_save_state(pci_dev);
> if (np->wol_enabled) {
> iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode);
> iowrite16(RxEnable, ioaddr + MACCtrl1);
> }
> - pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state),
> - np->wol_enabled);
> - pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
> +
> + device_set_wakeup_enable(dev_d, np->wol_enabled);
>
> return 0;
> }
>
> -static int sundance_resume(struct pci_dev *pci_dev)
> +static int __maybe_unused sundance_resume(struct device *dev_d)
> {
> - struct net_device *dev = pci_get_drvdata(pci_dev);
> + struct net_device *dev = dev_get_drvdata(dev_d);
> int err = 0;
>
> if (!netif_running(dev))
> return 0;
>
> - pci_set_power_state(pci_dev, PCI_D0);
> - pci_restore_state(pci_dev);
> - pci_enable_wake(pci_dev, PCI_D0, 0);
> -
> err = netdev_open(dev);
> if (err) {
> printk(KERN_ERR "%s: Can't resume interface!\n",
> @@ -1979,17 +1971,14 @@ static int sundance_resume(struct pci_dev *pci_dev)
> return err;
> }
>
> -#endif /* CONFIG_PM */
> +static SIMPLE_DEV_PM_OPS(sundance_pm_ops, sundance_suspend,
> sundance_resume);
>
> static struct pci_driver sundance_driver = {
> .name = DRV_NAME,
> .id_table = sundance_pci_tbl,
> .probe = sundance_probe1,
> .remove = sundance_remove1,
> -#ifdef CONFIG_PM
> - .suspend = sundance_suspend,
> - .resume = sundance_resume,
> -#endif /* CONFIG_PM */
> + .driver.pm = &sundance_pm_ops,
> };
>
> static int __init sundance_init(void)
> --
> 2.27.0
>
>

\
 
 \ /
  Last update: 2020-07-03 18:18    [W:0.080 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site