lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH v6 11/11] ppc64/kexec_file: enable early kernel's OPAL calls
From
Date
Kernel built with CONFIG_PPC_EARLY_DEBUG_OPAL enabled expects r8 & r9
to be filled with OPAL base & entry addresses respectively. Setting
these registers allows the kernel to perform OPAL calls before the
device tree is parsed.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
---

v5 -> v6:
* Added Reviewed-by tag from Thiago.
* Moved the patch to end of the series for mpe to take a call on whether
to have it or not.

v4 -> v5:
* New patch. Updated opal_base & opal_entry values in r8 & r9 respectively.
This change was part of the below dropped patch in v4:
- https://lore.kernel.org/patchwork/patch/1275667/


arch/powerpc/kexec/file_load_64.c | 20 ++++++++++++++++++++
arch/powerpc/purgatory/trampoline_64.S | 16 ++++++++++++++++
2 files changed, 36 insertions(+)

diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index c6a37ad5a0a4..53bb71e3a2e1 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -876,6 +876,7 @@ int setup_purgatory_ppc64(struct kimage *image, const void *slave_code,
const void *fdt, unsigned long kernel_load_addr,
unsigned long fdt_load_addr)
{
+ struct device_node *dn = NULL;
int ret;

ret = setup_purgatory(image, slave_code, fdt, kernel_load_addr,
@@ -903,9 +904,28 @@ int setup_purgatory_ppc64(struct kimage *image, const void *slave_code,
&image->arch.backup_start,
sizeof(image->arch.backup_start),
false);
+ if (ret)
+ goto out;
+
+ /* Setup OPAL base & entry values */
+ dn = of_find_node_by_path("/ibm,opal");
+ if (dn) {
+ u64 val;
+
+ of_property_read_u64(dn, "opal-base-address", &val);
+ ret = kexec_purgatory_get_set_symbol(image, "opal_base", &val,
+ sizeof(val), false);
+ if (ret)
+ goto out;
+
+ of_property_read_u64(dn, "opal-entry-address", &val);
+ ret = kexec_purgatory_get_set_symbol(image, "opal_entry", &val,
+ sizeof(val), false);
+ }
out:
if (ret)
pr_err("Failed to setup purgatory symbols");
+ of_node_put(dn);
return ret;
}

diff --git a/arch/powerpc/purgatory/trampoline_64.S b/arch/powerpc/purgatory/trampoline_64.S
index e79077ff1355..e6a6e7e6dfe4 100644
--- a/arch/powerpc/purgatory/trampoline_64.S
+++ b/arch/powerpc/purgatory/trampoline_64.S
@@ -87,6 +87,10 @@ master:
li %r4,28
STWX_BE %r17,%r3,%r4 /* Store my cpu as __be32 at byte 28 */
1:
+ /* Load opal base and entry values in r8 & r9 respectively */
+ ld %r8,(opal_base - 0b)(%r18)
+ ld %r9,(opal_entry - 0b)(%r18)
+
/* load the kernel address */
ld %r4,(kernel - 0b)(%r18)

@@ -133,6 +137,18 @@ backup_start:
.8byte 0x0
.size backup_start, . - backup_start

+ .balign 8
+ .globl opal_base
+opal_base:
+ .8byte 0x0
+ .size opal_base, . - opal_base
+
+ .balign 8
+ .globl opal_entry
+opal_entry:
+ .8byte 0x0
+ .size opal_entry, . - opal_entry
+
.data
.balign 8
.globl purgatory_sha256_digest

\
 
 \ /
  Last update: 2020-07-29 13:45    [W:0.072 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site