lkml.org 
[lkml]   [2020]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 63/78] drm/vc4: hdmi: Use clk_set_min_rate instead
Hi Maxime

On Wed, 8 Jul 2020 at 18:44, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The HSM clock needs to be running at 101% the pixel clock of the HDMI
> controller, however it's shared between the two HDMI controllers, which
> means that if the resolutions are different between the two HDMI
> controllers, and the lowest resolution is on the second (in enable order)
> controller, the first HDMI controller will end up with a smaller than
> expected clock rate.
>
> Since we don't really need an exact frequency there, we can simply change
> the minimum rate we expect instead.
>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 9f30fab744f2..d99188c90ff9 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -462,7 +462,7 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
> * pixel clock, but HSM ends up being the limiting factor.
> */
> hsm_rate = max_t(unsigned long, 120000000, (pixel_rate / 100) * 101);
> - ret = clk_set_rate(vc4_hdmi->hsm_clock, hsm_rate);
> + ret = clk_set_min_rate(vc4_hdmi->hsm_clock, hsm_rate);
> if (ret) {
> DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
> return;
> --
> git-series 0.9.1

\
 
 \ /
  Last update: 2020-07-28 16:58    [W:0.810 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site