lkml.org 
[lkml]   [2020]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
Am 2020-07-28 09:24, schrieb Lee Jones:
> On Sun, 26 Jul 2020, Michael Walle wrote:
>
>> Add a device tree bindings for the board management controller found
>> on
>> the Kontron SMARC-sAL28 board.
>>
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>> Changes since v5:
>> - none
>>
>> Changes since v4:
>> - fix the regex of the unit-address
>>
>> Changes since v3:
>> - see cover letter
>>
>> .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++
>> .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++
>> .../kontron,sl28cpld-intc.yaml | 54 +++++++
>> .../bindings/mfd/kontron,sl28cpld.yaml | 153
>> ++++++++++++++++++
>> .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++
>> .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++
>> 6 files changed, 358 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> create mode 100644
>> Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> create mode 100644
>> Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> create mode 100644
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> create mode 100644
>> Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
>> create mode 100644
>> Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> new file mode 100644
>> index 000000000000..9a63a158a796
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: GPIO driver for the sl28cpld board management controller
>> +
>> +maintainers:
>> + - Michael Walle <michael@walle.cc>
>> +
>> +description: |
>> + This module is part of the sl28cpld multi-function device. For more
>> + details see
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>
> Paths are normally relative.

grep Documentation/ Documentation

I know there are a lot false positives (esp in the first one)..

$ grep -r "\.\./" Documentation | wc -l
1826
$ grep -r "Documentation/" Documentation|wc -l
2862

>
>> + There are three flavors of the GPIO controller, one full featured
>> + input/output with interrupt support (kontron,sl28cpld-gpio), one
>> + output-only (kontron,sl28-gpo) and one input-only
>> (kontron,sl28-gpi).
>> +
>> + Each controller supports 8 GPIO lines.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - kontron,sl28cpld-gpio
>> + - kontron,sl28cpld-gpi
>> + - kontron,sl28cpld-gpo
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + "#interrupt-cells":
>> + const: 2
>> +
>> + interrupt-controller: true
>> +
>> + "#gpio-cells":
>> + const: 2
>> +
>> + gpio-controller: true
>> +
>> + gpio-line-names:
>> + minItems: 1
>> + maxItems: 8
>> +
>> +required:
>> + - compatible
>> + - "#gpio-cells"
>> + - gpio-controller
>> +
>> +additionalProperties: false
>> diff --git
>> a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> new file mode 100644
>> index 000000000000..1cebd61c6c32
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> @@ -0,0 +1,27 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Hardware monitoring driver for the sl28cpld board management
>> controller
>> +
>> +maintainers:
>> + - Michael Walle <michael@walle.cc>
>> +
>> +description: |
>> + This module is part of the sl28cpld multi-function device. For more
>> + details see
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - kontron,sl28cpld-fan
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> diff --git
>> a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> new file mode 100644
>> index 000000000000..4c39e9ff9aea
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id:
>> http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Interrupt controller driver for the sl28cpld board management
>> controller
>> +
>> +maintainers:
>> + - Michael Walle <michael@walle.cc>
>> +
>> +description: |
>> + This module is part of the sl28cpld multi-function device. For more
>> + details see
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>> +
>> + The following interrupts are available. All types and levels are
>> fixed
>> + and handled by the board management controller.
>> +
>> + ==== ============= ==================================
>> + IRQ line/device description
>> + ==== ============= ==================================
>> + 0 RTC_INT# Interrupt line from on-board RTC
>> + 1 SMB_ALERT# Event on SMB_ALERT# line (P1)
>> + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43)
>> + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44)
>> + 4 PWR_BTN# Event on PWR_BTN# line (P128)
>> + 5 SLEEP# Event on SLEEP# line (S149)
>> + 6 watchdog Interrupt of the internal watchdog
>> + 7 n/a not used
>> + ==== ============= ==================================
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - kontron,sl28cpld-intc
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + "#interrupt-cells":
>> + const: 2
>> +
>> + interrupt-controller: true
>> +
>> +required:
>> + - compatible
>> + - interrupts
>> + - "#interrupt-cells"
>> + - interrupt-controller
>> +
>> +additionalProperties: false
>> diff --git
>> a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> new file mode 100644
>> index 000000000000..e3a62db678e7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> @@ -0,0 +1,153 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Kontron's sl28cpld board management controller
> "S128CPLD" ?

still not, its sl28cpld, think of a project/code name, not the product
appended with CPLD.

> "Board Management Controller (BMC)" ?

sounds like IPMI, which I wanted to avoid.

>
>> +maintainers:
>> + - Michael Walle <michael@walle.cc>
>> +
>> +description: |
>> + The board management controller may contain different IP blocks
>> like
>> + watchdog, fan monitoring, PWM controller, interrupt controller and
>> a
>> + GPIO controller.
>> +
>> +properties:
>> + compatible:
>> + const: kontron,sl28cpld-r1
>
> We don't usually code revision numbers in compatible strings.
>
> Is there any way to pull this from the H/W?

No, unfortunately you can't. And I really want to keep that, in case
in the future there are some backwards incompatible changes.

>> + reg:
>> + description:
>> + I2C device address.
>> + maxItems: 1
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 0
>> +
>> + "#interrupt-cells":
>> + const: 2
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + interrupt-controller: true
>> +
>> +patternProperties:
>> + "^gpio(@[0-9a-f]+)?$":
>> + $ref: ../gpio/kontron,sl28cpld-gpio.yaml
>> +
>> + "^hwmon(@[0-9a-f]+)?$":
>> + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
>> +
>> + "^interrupt-controller(@[0-9a-f]+)?$":
>> + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
>> +
>> + "^pwm(@[0-9a-f]+)?$":
>> + $ref: ../pwm/kontron,sl28cpld-pwm.yaml
>> +
>> + "^watchdog(@[0-9a-f]+)?$":
>> + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
>> +
>> +required:
>> + - "#address-cells"
>> + - "#size-cells"
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + sl28cpld@4a {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "kontron,sl28cpld-r1";
>> + reg = <0x4a>;
>
> Nit: Could you put the 'reg' and 'compatible' at the top please?
>
> Same for all nodes.

Sure, I've looked at previous examples, but they are not
consistent, but it looked to me if the "#" properties are
listed first.

-michael

\
 
 \ /
  Last update: 2020-07-28 09:59    [W:0.288 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site