lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v7 0/2] phy: Add USB PHY support on Intel LGM SoC
    Date
    The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
    Requires minimal external components, a single resistor, for best operation.
    Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
    ---
    v7:
    - No Change
    v6:
    - No Change
    v5:
    - As per Felipe and Greg's suggestion usb phy driver reviewed patches
    changed the folder from drivers/usb/phy to drivers/phy
    - Reviewed-By tag added in commit message
    v4:
    - Andy's review comments addressed
    - drop the excess error debug prints
    - error check optimized
    - merge the split line to one line
    v3:
    - Andy's review comments update
    - hardcode return value changed to actual return value from the callee
    - add error check is fixed according to the above
    - correct the assignment in redundant
    - combine the split line into one line
    v2:
    - Address Phillip's review comments
    - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
    - re-design the assert and deassert fucntion calls as per review comments
    - address kbuild bot warnings
    - add the comments
    v1:
    - initial version

    ---
    dt-bindings: usb: Add USB PHY support for Intel LGM SoC
    v7:
    - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property
    v6:
    - Fixed the bot issue.
    - replace node-name by usb-phy@ in example
    v5:
    - Reviewed-By tag added
    v4:
    - No Change
    v3:
    - No Change
    v2:
    - No Change
    v1:
    - initial version


    Ramuthevar Vadivel Murugan (2):
    dt-bindings: phy: Add USB PHY support for Intel LGM SoC
    phy: Add USB3 PHY support for Intel LGM SoC

    .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml | 58 +++++
    drivers/phy/Kconfig | 11 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-lgm-usb.c | 278 +++++++++++++++++++++
    4 files changed, 348 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
    create mode 100644 drivers/phy/phy-lgm-usb.c

    --
    2.11.0

    \
     
     \ /
      Last update: 2020-07-27 12:06    [W:4.314 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site