lkml.org 
[lkml]   [2020]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v3 1/2] iio: gyro: Add driver support for ADXRS290
From
Date

On 26/07/20 5:45 pm, Jonathan Cameron wrote:
> On Fri, 24 Jul 2020 16:31:59 +0530
> Nishant Malpani <nish.malpani25@gmail.com> wrote:
>
>> ADXRS290 is a high performance MEMS pitch and roll (dual-axis in-plane)
>> angular rate sensor (gyroscope) designed for use in stabilization
>> applications. It also features an internal temperature sensor and
>> programmable high-pass and low-pass filters.
>>
>> Add support for ADXRS290 in direct-access mode for now.
>>
>> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf
>> Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
>
> Looks pretty good to me. A few minor comments seeing as you'll be doing
> a v4 anyway to tidy up the bits Andy pointed out.
>
> I've pointed out the locking is probably in excess of what is needed, but
> I have no problem with you leaving it as it stands, in the interests of
> having less fragile code as you extend the driver futher.
>
> Thanks,
>
> Jonathan
>
>> ---
>>
>> Changes in v3:
>> - drop "Link" tag & extra line in commit message
>> - rename cut-off frequencies tables to
>> 'adxrs290_{lpf, hpf}_3db_freq_hz_table' to be more descriptive
>> - fix unsigned type errors
>> - add comments on how to scale raw angular velocity and temperature
>> values to appropriate units mentioned in the ABI
>> - re-order declarations in reversed spruce tree order
>> - remove 'indio_dev->dev.parent = &spi->dev' as the iio core handles it
>> during iio_device_alloc()
>> - use plain msleep() instead of the interruptible variant
>> - remove extra terminal comma
>>
>> Changes in v2:
>> - append copyright tag with author's info
>> - remove asm/unaligned.h header
>> - remove unnecessary comments about the registers' description
>> - rephrase comment on the usage of mutex_lock
>> - discard the usage of local tx, rx buffers; use DMA-safe buffers
>> provided by the SPI core instead
>> - utilize spi_w8r16 provided by the SPI core instead of writing a
>> wrapper over spi_sync_transfer which semantically does the same
>> - equip spi_write_then_read instead of plain spi_write since the
>> latter requires a DMA-safe buffer
>> - implement exact matching of filter 3db frequencies instead of
>> finding the "closest" match; rounding complexity is left to the
>> userspace
>> - include 'info_mask_shared_by_type_available' when initialising
>> iio_chan_spec instead of explicitly exposing attributes
>> signifying available filter 3db frequencies; with this we can
>> utilize read_avail core callback
>> ---
>> MAINTAINERS | 6 +
>> drivers/iio/gyro/Kconfig | 10 +
>> drivers/iio/gyro/Makefile | 1 +
>> drivers/iio/gyro/adxrs290.c | 446 ++++++++++++++++++++++++++++++++++++
>> 4 files changed, 463 insertions(+)
>> create mode 100644 drivers/iio/gyro/adxrs290.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 9077411c9890..71ae9b184179 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1098,6 +1098,12 @@ L: linux-media@vger.kernel.org
>> S: Maintained
>> F: drivers/media/i2c/adv7842*
>>
>> +ANALOG DEVICES INC ADXRS290 DRIVER
>> +M: Nishant Malpani <nish.malpani25@gmail.com>
>> +L: linux-iio@vger.kernel.org
>> +S: Supported
>> +F: drivers/iio/gyro/adxrs290.c
>> +
>> ANALOG DEVICES INC ASOC CODEC DRIVERS
>> M: Lars-Peter Clausen <lars@metafoo.de>
>> M: Nuno Sá <nuno.sa@analog.com>
>> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
>> index 6daeddf37f60..024a34139875 100644
>> --- a/drivers/iio/gyro/Kconfig
>> +++ b/drivers/iio/gyro/Kconfig
>> @@ -41,6 +41,16 @@ config ADIS16260
>> This driver can also be built as a module. If so, the module
>> will be called adis16260.
>>
>> +config ADXRS290
>> + tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
>> + depends on SPI
>> + help
>> + Say yes here to build support for Analog Devices ADXRS290 programmable
>> + digital output gyroscope.
>> +
>> + This driver can also be built as a module. If so, the module will be
>> + called adxrs290.
>> +
>> config ADXRS450
>> tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
>> depends on SPI
>> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
>> index 45cbd5dc644e..0319b397dc3f 100644
>> --- a/drivers/iio/gyro/Makefile
>> +++ b/drivers/iio/gyro/Makefile
>> @@ -8,6 +8,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o
>> obj-$(CONFIG_ADIS16130) += adis16130.o
>> obj-$(CONFIG_ADIS16136) += adis16136.o
>> obj-$(CONFIG_ADIS16260) += adis16260.o
>> +obj-$(CONFIG_ADXRS290) += adxrs290.o
>> obj-$(CONFIG_ADXRS450) += adxrs450.o
>> obj-$(CONFIG_BMG160) += bmg160_core.o
>> obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
>> diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c
>> new file mode 100644
>> index 000000000000..cff1af9211bc
>> --- /dev/null
>> +++ b/drivers/iio/gyro/adxrs290.c
>> @@ -0,0 +1,446 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * ADXRS290 SPI Gyroscope Driver
>> + *
>> + * Copyright (C) 2020 Nishant Malpani <nish.malpani25@gmail.com>
>> + * Copyright (C) 2020 Analog Devices, Inc.
>> + */
>> +
>> +#include <linux/bitfield.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/spi/spi.h>
>> +
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/sysfs.h>
>> +
>> +#define ADXRS290_ADI_ID 0xAD
>> +#define ADXRS290_MEMS_ID 0x1D
>> +#define ADXRS290_DEV_ID 0x92
>> +
>> +#define ADXRS290_REG_ADI_ID 0x00
>> +#define ADXRS290_REG_MEMS_ID 0x01
>> +#define ADXRS290_REG_DEV_ID 0x02
>> +#define ADXRS290_REG_REV_ID 0x03
>> +#define ADXRS290_REG_SN0 0x04 /* Serial Number Registers, 4 bytes */
>> +#define ADXRS290_REG_DATAX0 0x08 /* Roll Rate o/p Data Regs, 2 bytes */
>> +#define ADXRS290_REG_DATAY0 0x0A /* Pitch Rate o/p Data Regs, 2 bytes */
>> +#define ADXRS290_REG_TEMP0 0x0C
>> +#define ADXRS290_REG_POWER_CTL 0x10
>> +#define ADXRS290_REG_FILTER 0x11
>> +#define ADXRS290_REG_DATA_RDY 0x12
>> +
>> +#define ADXRS290_READ BIT(7)
>> +#define ADXRS290_TSM BIT(0)
>> +#define ADXRS290_MEASUREMENT BIT(1)
>> +#define ADXRS290_SYNC GENMASK(1, 0)
>> +#define ADXRS290_LPF_MASK GENMASK(2, 0)
>> +#define ADXRS290_LPF(x) FIELD_PREP(ADXRS290_LPF_MASK, x)
>> +#define ADXRS290_HPF_MASK GENMASK(7, 4)
>> +#define ADXRS290_HPF(x) FIELD_PREP(ADXRS290_HPF_MASK, x)
>> +
>> +#define ADXRS290_READ_REG(reg) (ADXRS290_READ | (reg))
>> +
>> +#define ADXRS290_MAX_TRANSITION_TIME_MS 100
>> +
>> +enum adxrs290_mode {
>> + STANDBY,
>> + MEASUREMENT,
>> +};
>> +
>> +struct adxrs290_state {
>> + struct spi_device *spi;
>> + /* Serialize reads and their subsequent processing */
>> + struct mutex lock;
>> + enum adxrs290_mode mode;
>> + unsigned int lpf_3db_freq_idx;
>> + unsigned int hpf_3db_freq_idx;
>> +};
>> +
>> +/*
>> + * Available cut-off frequencies of the low pass filter in Hz.
>> + * The integer part and fractional part are represented separately.
>> + */
>> +static const int adxrs290_lpf_3db_freq_hz_table[][2] = {
>> + [0] = {480, 0},
>> + [1] = {320, 0},
>> + [2] = {160, 0},
>> + [3] = {80, 0},
>> + [4] = {56, 600000},
>> + [5] = {40, 0},
>> + [6] = {28, 300000},
>> + [7] = {20, 0},
>> +};
>> +
>> +/*
>> + * Available cut-off frequencies of the high pass filter in Hz.
>> + * The integer part and fractional part are represented separately.
>> + */
>> +static const int adxrs290_hpf_3db_freq_hz_table[][2] = {
>> + [0] = {0, 0},
>> + [1] = {0, 11000},
>> + [2] = {0, 22000},
>> + [3] = {0, 44000},
>> + [4] = {0, 87000},
>> + [5] = {0, 175000},
>> + [6] = {0, 350000},
>> + [7] = {0, 700000},
>> + [8] = {1, 400000},
>> + [9] = {2, 800000},
>> + [10] = {11, 300000},
>> +};
>> +
>> +static int adxrs290_get_rate_data(struct iio_dev *indio_dev, const u8 cmd,
>> + unsigned int *val)
>
> Why go through the effort of signed to unsigned to signed for val?
>
Yeah, those are some unnecessary type promotions and demotions. Will
change the function signature to directly accept 'int *val' in v4.

>> +{
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + int ret = 0;
>> + int temp;
>> +
>> + mutex_lock(&st->lock);
>> + temp = spi_w8r16(st->spi, cmd);
>> + if (temp < 0) {
>> + ret = temp;
>> + goto err_unlock;
>> + }
>> +
>> + *val = temp;
>> +
>> +err_unlock:
>> + mutex_unlock(&st->lock);
>> + return ret;
>> +}
>> +
>> +static int adxrs290_get_temp_data(struct iio_dev *indio_dev, unsigned int *val)
>> +{
>> + const u8 cmd = ADXRS290_READ_REG(ADXRS290_REG_TEMP0);
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + int ret = 0;
>> + int temp;
>> +
>> + mutex_lock(&st->lock);
>
> Just a quick note here. I don't think you actually need the lock
> (yet) as you aren't doing any read modify write cycles and in this
> particular case there is no local cached state to protect.
> However, I don't mind if you want to leave them as it may make things
> less fragile as you move forwards.
>
I was also doubtful about the protections previously but, as you've
summarized perfectly, I left those as a 'good-to-have' for now, in the
hope that they might be necessary as I incrementally add more support in
the driver.

>> + temp = spi_w8r16(st->spi, cmd);
>> + if (temp < 0) {
>> + ret = temp;
>> + goto err_unlock;
>> + }
>> +
>> + /* extract lower 12 bits temperature reading */
>> + *val = temp & 0x0FFF;
>> +
>> +err_unlock:
>> + mutex_unlock(&st->lock);
>> + return ret;
>> +}
>> +
>> +static int adxrs290_get_3db_freq(struct iio_dev *indio_dev, u8 *val, u8 *val2)
>> +{
>> + const u8 cmd = ADXRS290_READ_REG(ADXRS290_REG_FILTER);
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + int ret = 0;
>> + short temp;
>> +
>> + mutex_lock(&st->lock);
>> + temp = spi_w8r8(st->spi, cmd);
>> + if (temp < 0) {
>> + ret = temp;
>> + goto err_unlock;
>> + }
>> +
>> + *val = FIELD_GET(ADXRS290_LPF_MASK, temp);
>> + *val2 = FIELD_GET(ADXRS290_HPF_MASK, temp);
>> +
>> +err_unlock:
>> + mutex_unlock(&st->lock);
>> + return ret;
>> +}
>> +
>> +static int adxrs290_spi_write_reg(struct spi_device *spi, const u8 reg,
>> + const u8 val)
>> +{
>> + u8 buf[2];
>> +
>> + buf[0] = reg;
>> + buf[1] = val;
>> +
>> + return spi_write_then_read(spi, buf, ARRAY_SIZE(buf), NULL, 0);
>> +}
>> +
>> +static int adxrs290_find_match(const int (*freq_tbl)[2], const int n,
>> + const int val, const int val2)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < n; i++) {
>> + if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2)
>> + return i;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int adxrs290_set_filter_freq(struct iio_dev *indio_dev,
>> + const unsigned int lpf_idx,
>> + const unsigned int hpf_idx)
>> +{
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + u8 val;
>> +
>> + val = ADXRS290_HPF(hpf_idx) | ADXRS290_LPF(lpf_idx);
>> +
>> + return adxrs290_spi_write_reg(st->spi, ADXRS290_REG_FILTER, val);
>> +}
>> +
>> +static int adxrs290_initial_setup(struct iio_dev *indio_dev)
>> +{
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> +
>> + st->mode = MEASUREMENT;
>> +
>> + return adxrs290_spi_write_reg(st->spi,
>> + ADXRS290_REG_POWER_CTL,
>> + ADXRS290_MEASUREMENT | ADXRS290_TSM);
>> +}
>> +
>> +static int adxrs290_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + int *val,
>> + int *val2,
>> + long mask)
>> +{
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + unsigned int t;
>> + int ret;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + switch (chan->type) {
>> + case IIO_ANGL_VEL:
>> + ret = adxrs290_get_rate_data(indio_dev,
>> + ADXRS290_READ_REG(chan->address),
>> + &t);
>> + if (ret < 0)
>> + return ret;
>> + *val = t;
>
> As mentioned above, you should be fine with using a signed value where you have &t.
> As we don't use *val in the error case, it's fine to write directly into it and
> avoid the need for the local variable t at all.

Okay, will take care of this in v4.

>
>> + return IIO_VAL_INT;
>> + case IIO_TEMP:
>> + ret = adxrs290_get_temp_data(indio_dev, &t);
>> + if (ret < 0)
>> + return ret;
>> + *val = t;
>> + return IIO_VAL_INT;
>> + default:
>> + return -EINVAL;
>> + }
>> + case IIO_CHAN_INFO_SCALE:
>> + switch (chan->type) {
>> + case IIO_ANGL_VEL:
>> + /* 1 LSB = 0.005 degrees/sec */
>> + *val = 0;
>> + *val2 = 87266;
>> + return IIO_VAL_INT_PLUS_NANO;
>> + case IIO_TEMP:
>> + /* 1 LSB = 0.1 degrees Celsius */
>> + *val = 100;
>> + return IIO_VAL_INT;
>> + default:
>> + return -EINVAL;
>> + }
>> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
>> + switch (chan->type) {
>> + case IIO_ANGL_VEL:
>> + t = st->lpf_3db_freq_idx;
>> + *val = adxrs290_lpf_3db_freq_hz_table[t][0];
>> + *val2 = adxrs290_lpf_3db_freq_hz_table[t][1];
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + default:
>> + return -EINVAL;
>> + }
>> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
>> + switch (chan->type) {
>> + case IIO_ANGL_VEL:
>> + t = st->hpf_3db_freq_idx;
>> + *val = adxrs290_hpf_3db_freq_hz_table[t][0];
>> + *val2 = adxrs290_hpf_3db_freq_hz_table[t][1];
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + default:
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int adxrs290_write_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + int val,
>> + int val2,
>> + long mask)
>> +{
>> + struct adxrs290_state *st = iio_priv(indio_dev);
>> + int lpf_idx, hpf_idx;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
>> + lpf_idx = adxrs290_find_match(adxrs290_lpf_3db_freq_hz_table,
>> + ARRAY_SIZE(adxrs290_lpf_3db_freq_hz_table),
>> + val, val2);
>> + if (lpf_idx < 0)
>> + return -EINVAL;
>> + /* caching the updated state of the low-pass filter */
>> + st->lpf_3db_freq_idx = lpf_idx;
>> + /* retrieving the current state of the high-pass filter */
>> + hpf_idx = st->hpf_3db_freq_idx;
>> + return adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
>> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
>> + hpf_idx = adxrs290_find_match(adxrs290_hpf_3db_freq_hz_table,
>> + ARRAY_SIZE(adxrs290_hpf_3db_freq_hz_table),
>> + val, val2);
>> + if (hpf_idx < 0)
>> + return -EINVAL;
>> + /* caching the updated state of the high-pass filter */
>> + st->hpf_3db_freq_idx = hpf_idx;
>> + /* retrieving the current state of the low-pass filter */
>> + lpf_idx = st->lpf_3db_freq_idx;
>> + return adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int adxrs290_read_avail(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + const int **vals, int *type, int *length,
>> + long mask)
>> +{
>> + switch (mask) {
>> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
>> + *vals = (const int *)adxrs290_lpf_3db_freq_hz_table;
>> + *type = IIO_VAL_INT_PLUS_MICRO;
>> + /* Values are stored in a 2D matrix */
>> + *length = ARRAY_SIZE(adxrs290_lpf_3db_freq_hz_table) * 2;
>> +
>> + return IIO_AVAIL_LIST;
>> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
>> + *vals = (const int *)adxrs290_hpf_3db_freq_hz_table;
>> + *type = IIO_VAL_INT_PLUS_MICRO;
>> + /* Values are stored in a 2D matrix */
>> + *length = ARRAY_SIZE(adxrs290_hpf_3db_freq_hz_table) * 2;
>> +
>> + return IIO_AVAIL_LIST;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +#define ADXRS290_ANGL_VEL_CHANNEL(reg, axis) { \
>> + .type = IIO_ANGL_VEL, \
>> + .address = reg, \
>> + .modified = 1, \
>> + .channel2 = IIO_MOD_##axis, \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
>> + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
>> + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
>> + .info_mask_shared_by_type_available = \
>> + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
>> + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
>> +}
>> +
>> +static const struct iio_chan_spec adxrs290_channels[] = {
>> + ADXRS290_ANGL_VEL_CHANNEL(ADXRS290_REG_DATAX0, X),
>> + ADXRS290_ANGL_VEL_CHANNEL(ADXRS290_REG_DATAY0, Y),
>> + {
>> + .type = IIO_TEMP,
>> + .address = ADXRS290_REG_TEMP0,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + },
>> +};
>> +
>> +static const struct iio_info adxrs290_info = {
>> + .read_raw = &adxrs290_read_raw,
>> + .write_raw = &adxrs290_write_raw,
>> + .read_avail = &adxrs290_read_avail,
>> +};
>> +
>> +static int adxrs290_probe(struct spi_device *spi)
>> +{
>> + struct iio_dev *indio_dev;
>> + struct adxrs290_state *st;
>> + u8 val, val2;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + st = iio_priv(indio_dev);
>> + st->spi = spi;
>> + spi_set_drvdata(spi, indio_dev);
>
> As things currently stand I don't think you ever use this.
> So drop it for now and reintroduce it when you need it (probably when
> you add power management support).

Okay, makes sense. Will remove it in v4.

With regards,
Nishant Malpani

>
>> +
>> + indio_dev->name = "adxrs290";
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->channels = adxrs290_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(adxrs290_channels);
>> + indio_dev->info = &adxrs290_info;
>> +
>> + val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_ADI_ID));
>> + if (val != ADXRS290_ADI_ID) {
>> + dev_err(&spi->dev, "Wrong ADI ID 0x%02x\n", val);
>> + return -ENODEV;
>> + }
>> +
>> + val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_MEMS_ID));
>> + if (val != ADXRS290_MEMS_ID) {
>> + dev_err(&spi->dev, "Wrong MEMS ID 0x%02x\n", val);
>> + return -ENODEV;
>> + }
>> +
>> + val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_DEV_ID));
>> + if (val != ADXRS290_DEV_ID) {
>> + dev_err(&spi->dev, "Wrong DEV ID 0x%02x\n", val);
>> + return -ENODEV;
>> + }
>> +
>> + /* default mode the gyroscope starts in */
>> + st->mode = STANDBY;
>> +
>> + /* switch to measurement mode and switch on the temperature sensor */
>> + ret = adxrs290_initial_setup(indio_dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + /* max transition time to measurement mode */
>> + msleep(ADXRS290_MAX_TRANSITION_TIME_MS);
>> +
>> + ret = adxrs290_get_3db_freq(indio_dev, &val, &val2);
>> + if (ret < 0)
>> + return ret;
>> +
>> + st->lpf_3db_freq_idx = val;
>> + st->hpf_3db_freq_idx = val2;
>> +
>> + return devm_iio_device_register(&spi->dev, indio_dev);
>> +}
>> +
>> +static const struct of_device_id adxrs290_of_match[] = {
>> + { .compatible = "adi,adxrs290" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, adxrs290_of_match);
>> +
>> +static struct spi_driver adxrs290_driver = {
>> + .driver = {
>> + .name = "adxrs290",
>> + .of_match_table = adxrs290_of_match,
>> + },
>> + .probe = adxrs290_probe,
>> +};
>> +module_spi_driver(adxrs290_driver);
>> +
>> +MODULE_AUTHOR("Nishant Malpani <nish.malpani25@gmail.com>");
>> +MODULE_DESCRIPTION("Analog Devices ADXRS290 Gyroscope SPI driver");
>> +MODULE_LICENSE("GPL");
>

\
 
 \ /
  Last update: 2020-07-26 16:07    [W:0.179 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site