lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC 11/11] scsi: storvsc: Support PAGE_SIZE larger than 4K
On Thu, Jul 23, 2020 at 12:13:07AM +0000, Michael Kelley wrote:
> From: Boqun Feng <boqun.feng@gmail.com> Sent: Monday, July 20, 2020 6:42 PM
> >
> > Hyper-V always use 4k page size (HV_HYP_PAGE_SIZE), so when
> > communicating with Hyper-V, a guest should always use HV_HYP_PAGE_SIZE
> > as the unit for page related data. For storvsc, the data is
> > vmbus_packet_mpb_array. And since in scsi_cmnd, sglist of pages (in unit
> > of PAGE_SIZE) is used, we need convert pages in the sglist of scsi_cmnd
> > into Hyper-V pages in vmbus_packet_mpb_array.
> >
> > This patch does the conversion by dividing pages in sglist into Hyper-V
> > pages, offset and indexes in vmbus_packet_mpb_array are recalculated
> > accordingly.
> >
> > Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> > ---
> > drivers/scsi/storvsc_drv.c | 27 +++++++++++++++++++++------
> > 1 file changed, 21 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> > index fb41636519ee..c54d25f279bc 100644
> > --- a/drivers/scsi/storvsc_drv.c
> > +++ b/drivers/scsi/storvsc_drv.c
> > @@ -1561,7 +1561,7 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct
> > scsi_cmnd *scmnd)
> > struct hv_host_device *host_dev = shost_priv(host);
> > struct hv_device *dev = host_dev->dev;
> > struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd);
> > - int i;
> > + int i, j, k;
> > struct scatterlist *sgl;
> > unsigned int sg_count = 0;
> > struct vmscsi_request *vm_srb;
> > @@ -1569,6 +1569,8 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct
> > scsi_cmnd *scmnd)
> > struct vmbus_packet_mpb_array *payload;
> > u32 payload_sz;
> > u32 length;
> > + int subpage_idx = 0;
> > + unsigned int hvpg_count = 0;
> >
> > if (vmstor_proto_version <= VMSTOR_PROTO_VERSION_WIN8) {
> > /*
> > @@ -1643,23 +1645,36 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct
> > scsi_cmnd *scmnd)
> > payload_sz = sizeof(cmd_request->mpb);
> >
> > if (sg_count) {
> > - if (sg_count > MAX_PAGE_BUFFER_COUNT) {
> > + hvpg_count = sg_count * (PAGE_SIZE / HV_HYP_PAGE_SIZE);
>
> The above calculation doesn't take into account the offset in the
> first sglist or the overall length of the transfer, so the value of hvpg_count
> could be quite a bit bigger than it needs to be. For example, with a 64K
> page size and an 8 Kbyte transfer size that starts at offset 60K in the
> first page, hvpg_count will be 32 when it really only needs to be 2.
>
> The nested loops below that populate the pfn_array take the
> offset into account when starting, so that's good. But it will potentially
> leave allocated entries unused. Furthermore, the nested loops could
> terminate early when enough Hyper-V size pages are mapped to PFNs
> based on the length of the transfer, even if all of the last guest size
> page has not been mapped to PFNs. Like the offset at the beginning of
> first guest size page in the sglist, there's potentially an unused portion
> at the end of the last guest size page in the sglist.
>

Good point. I think we could calculate the exact hvpg_count as follow:

hvpg_count = 0;
cur_sgl = sgl;

for (i = 0; i < sg_count; i++) {
hvpg_count += HVPFN_UP(cur_sg->length)
cur_sgl = sg_next(cur_sgl);
}

> > + if (hvpg_count > MAX_PAGE_BUFFER_COUNT) {
> >
> > - payload_sz = (sg_count * sizeof(u64) +
> > + payload_sz = (hvpg_count * sizeof(u64) +
> > sizeof(struct vmbus_packet_mpb_array));
> > payload = kzalloc(payload_sz, GFP_ATOMIC);
> > if (!payload)
> > return SCSI_MLQUEUE_DEVICE_BUSY;
> > }
> >
> > + /*
> > + * sgl is a list of PAGEs, and payload->range.pfn_array
> > + * expects the page number in the unit of HV_HYP_PAGE_SIZE (the
> > + * page size that Hyper-V uses, so here we need to divide PAGEs
> > + * into HV_HYP_PAGE in case that PAGE_SIZE > HV_HYP_PAGE_SIZE.
> > + */
> > payload->range.len = length;
> > - payload->range.offset = sgl[0].offset;
> > + payload->range.offset = sgl[0].offset & ~HV_HYP_PAGE_MASK;
> > + subpage_idx = sgl[0].offset >> HV_HYP_PAGE_SHIFT;
> >
> > cur_sgl = sgl;
> > + k = 0;
> > for (i = 0; i < sg_count; i++) {
> > - payload->range.pfn_array[i] =
> > - page_to_pfn(sg_page((cur_sgl)));
> > + for (j = subpage_idx; j < (PAGE_SIZE / HV_HYP_PAGE_SIZE); j++) {
>
> In the case where PAGE_SIZE == HV_HYP_PAGE_SIZE, would it help the compiler
> eliminate the loop if local variable j is declared as unsigned? In that case the test in the
> for statement will always be false.
>

Good point! I did the following test:

test.c:

int func(unsigned int input, int *arr)
{
unsigned int i;
int result = 0;

for (i = input; i < 1; i++)
result += arr[i];

return result;
}

if I define i as "int", I got:

0000000000000000 <func>:
0: 85 ff test %edi,%edi
2: 7f 2c jg 30 <func+0x30>
4: 48 63 d7 movslq %edi,%rdx
7: f7 df neg %edi
9: 45 31 c0 xor %r8d,%r8d
c: 89 ff mov %edi,%edi
e: 48 8d 04 96 lea (%rsi,%rdx,4),%rax
12: 48 01 d7 add %rdx,%rdi
15: 48 8d 54 be 04 lea 0x4(%rsi,%rdi,4),%rdx
1a: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
20: 44 03 00 add (%rax),%r8d
23: 48 83 c0 04 add $0x4,%rax
27: 48 39 d0 cmp %rdx,%rax
2a: 75 f4 jne 20 <func+0x20>
2c: 44 89 c0 mov %r8d,%eax
2f: c3 retq
30: 45 31 c0 xor %r8d,%r8d
33: 44 89 c0 mov %r8d,%eax
36: c3 retq

and when I define i as "unsigned int", I got:

0000000000000000 <func>:
0: 85 ff test %edi,%edi
2: 75 03 jne 7 <func+0x7>
4: 8b 06 mov (%rsi),%eax
6: c3 retq
7: 31 c0 xor %eax,%eax
9: c3 retq

So clearly it helps, I will change this in the next version.

Regards,
Boqun

> > + payload->range.pfn_array[k] =
> > + page_to_hvpfn(sg_page((cur_sgl))) + j;
> > + k++;
> > + }
> > cur_sgl = sg_next(cur_sgl);
> > + subpage_idx = 0;
> > }
> > }
> >
> > --
> > 2.27.0
>

\
 
 \ /
  Last update: 2020-07-23 03:52    [W:0.620 / U:2.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site