lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Add USB role switch support to DWC2
From
Date
Hi Amélie

On 6/16/20 4:07 PM, Amelie Delaunay wrote:
> When using usb-c connector (but it can also be the case with a micro-b
> connector), iddig, avalid, bvalid, vbusvalid input signals may not be
> connected to the DWC2 OTG controller.
> DWC2 OTG controller features an overriding control of the PHY voltage valid
> and ID input signals.
> So, missing signals can be forced using usb role from usb role switch and
> this override feature.
>
> This series adds support for usb role switch to dwc2, by using overriding
> control of the PHY voltage valid and ID input signals.
>
> It has been tested on stm32mp157c-dk2 [1], which has a Type-C connector
> managed by a Type-C port controller, and connected to USB OTG controller.
>
> [1] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
>
> Amelie Delaunay (3):
> usb: dwc2: override PHY input signals with usb role switch support
> usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15
> SoCs
> ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx
>
> arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 2 +-
> drivers/usb/dwc2/Kconfig | 1 +
> drivers/usb/dwc2/Makefile | 2 +-
> drivers/usb/dwc2/core.h | 8 ++
> drivers/usb/dwc2/drd.c | 190 +++++++++++++++++++++++++
> drivers/usb/dwc2/gadget.c | 2 +-
> drivers/usb/dwc2/params.c | 4 +-
> drivers/usb/dwc2/platform.c | 13 ++
> 8 files changed, 218 insertions(+), 4 deletions(-)
> create mode 100644 drivers/usb/dwc2/drd.c
>

DT patch applied on stm32-next.

Thanks
Alex

\
 
 \ /
  Last update: 2020-07-21 10:55    [W:0.121 / U:1.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site