lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 3/3] skd: use generic power management
Date
On 2020/07/20 22:18, Vaibhav Gupta wrote:
> On Mon, Jul 20, 2020 at 12:52:14PM +0000, Damien Le Moal wrote:
>> On 2020/07/17 17:10, Vaibhav Gupta wrote:
>>> Drivers using legacy PM have to manage PCI states and device's PM states
>>> themselves. They also need to take care of configuration registers.
>>>
>>> With improved and powerful support of generic PM, PCI Core takes care of
>>> above mentioned, device-independent, jobs.
>>>
>>> This driver makes use of PCI helper functions like
>>> pci_save/restore_state(), pci_enable/disable_device(),
>>> pci_request/release_regions(), pci_set_power_state() and
>>> pci_set_master() to do required operations. In generic mode, they are no
>>> longer needed.
>>>
>>> Change function parameter in both .suspend() and .resume() to
>>> "struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.
>>>
>>> Compile-tested only.
>>
>> I do not think this belongs into the commit message. This was mentioned in the
>> cover letter.
>>
> The messages in cover letter and commit message are bit similar. But the commit
> message has patch specific changes mentioned in it.

My point was about the "compile-tested only" mention in the commit message. That
should be mentioned in the cover letter only. The goal of the patch review
process is also to get these patches tested by others if you do not have access
to the hardware. That is fine, and I can test for the skd driver. But a patch
mentioning that it is untested cannot be applied, for obvious reasons :)

So I only requested that you remove the "compiled tested only" note. The commit
message could be simpler too, see followup comment.

>>>
>>> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
>>> ---
>>> drivers/block/skd_main.c | 36 ++++++++++--------------------------
>>> 1 file changed, 10 insertions(+), 26 deletions(-)
>>>
>>> diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
>>> index 51569c199a6c..d8d1042e7338 100644
>>> --- a/drivers/block/skd_main.c
>>> +++ b/drivers/block/skd_main.c
>>> @@ -3315,12 +3315,12 @@ static void skd_pci_remove(struct pci_dev *pdev)
>>> return;
>>> }
>>>
>>> -static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
>>> +static int __maybe_unused skd_pci_suspend(struct device *dev)
>>> {
>>> int i;
>>> - struct skd_device *skdev;
>>> + struct pci_dev *pdev = to_pci_dev(dev);
>>> + struct skd_device *skdev = pci_get_drvdata(pdev);
>>
>> You can just add the pdev declaration here. The other 2 changes are not needed.
>>
> Okay.
>>>
>>> - skdev = pci_get_drvdata(pdev);
>>
>> You can keep this as is.
>>
>>> if (!skdev) {
>>> dev_err(&pdev->dev, "no device data for PCI\n");
>>> return -EIO;
>>> @@ -3337,35 +3337,23 @@ static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
>>> if (skdev->pcie_error_reporting_is_enabled)
>>> pci_disable_pcie_error_reporting(pdev);
>>>
>>> - pci_release_regions(pdev);
>>> - pci_save_state(pdev);
>>> - pci_disable_device(pdev);
>>> - pci_set_power_state(pdev, pci_choose_state(pdev, state));
>>> return 0;
>>> }
>>>
>>> -static int skd_pci_resume(struct pci_dev *pdev)
>>> +static int __maybe_unused skd_pci_resume(struct device *dev)
>>> {
>>> int i;
>>> int rc = 0;
>>> - struct skd_device *skdev;
>>>
>>> - skdev = pci_get_drvdata(pdev);
>>
>> Same comment as above. Keep these as is and add only pdev declaration.
>>
> Okay.
> Sending v2 with suggested changes.
>
> --Vaibhav Gupta
>>> + struct pci_dev *pdev = to_pci_dev(dev);
>>> + struct skd_device *skdev = pci_get_drvdata(pdev);
>>> if (!skdev) {
>>> dev_err(&pdev->dev, "no device data for PCI\n");
>>> return -1;
>>> }
>>>
>>> - pci_set_power_state(pdev, PCI_D0);
>>> - pci_enable_wake(pdev, PCI_D0, 0);
>>> - pci_restore_state(pdev);
>>> + device_wakeup_disable(dev);
>>>
>>> - rc = pci_enable_device(pdev);
>>> - if (rc)
>>> - return rc;
>>> - rc = pci_request_regions(pdev, DRV_NAME);
>>> - if (rc)
>>> - goto err_out;
>>> rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>>> if (rc)
>>> rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
>>> @@ -3374,7 +3362,6 @@ static int skd_pci_resume(struct pci_dev *pdev)
>>> goto err_out_regions;
>>> }
>>>
>>> - pci_set_master(pdev);
>>> rc = pci_enable_pcie_error_reporting(pdev);
>>> if (rc) {
>>> dev_err(&pdev->dev,
>>> @@ -3427,10 +3414,6 @@ static int skd_pci_resume(struct pci_dev *pdev)
>>> pci_disable_pcie_error_reporting(pdev);
>>>
>>> err_out_regions:
>>> - pci_release_regions(pdev);
>>> -
>>> -err_out:
>>> - pci_disable_device(pdev);
>>> return rc;
>>> }
>>>
>>> @@ -3450,13 +3433,14 @@ static void skd_pci_shutdown(struct pci_dev *pdev)
>>> skd_stop_device(skdev);
>>> }
>>>
>>> +static SIMPLE_DEV_PM_OPS(skd_pci_pm_ops, skd_pci_suspend, skd_pci_resume);
>>> +
>>> static struct pci_driver skd_driver = {
>>> .name = DRV_NAME,
>>> .id_table = skd_pci_tbl,
>>> .probe = skd_pci_probe,
>>> .remove = skd_pci_remove,
>>> - .suspend = skd_pci_suspend,
>>> - .resume = skd_pci_resume,
>>> + .driver.pm = &skd_pci_pm_ops,
>>> .shutdown = skd_pci_shutdown,
>>> };
>>>
>>>
>>
>>
>> --
>> Damien Le Moal
>> Western Digital Research
>


--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2020-07-21 04:49    [W:0.080 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site