lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 06/10] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
On Fri, Jul 17, 2020 at 2:10 PM Ravi Bangoria
<ravi.bangoria@linux.ibm.com> wrote:
>
> As per the PAPR, bit 0 of byte 64 in pa-features property indicates
> availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
> DAWR is present, otherwise not. Host generally uses "cpu-features",
> which masks "pa-features". But "cpu-features" are still not used for
> guests and thus this change is mostly applicable for guests only.
>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
I checked those PAPR values are correct and checked running a powernv
kernel in p10 mambo with dt_cpu_ftrs=off and it does set the
CPU_FTR_DAWR1 bit.
(using p10 skiboot).
Tested-by: Jordan Niethe <jniethe5@gmail.com>
> ---
> arch/powerpc/kernel/prom.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index 9cc49f265c86..c76c09b97bc8 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -175,6 +175,8 @@ static struct ibm_pa_feature {
> */
> { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
> .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
> +
> + { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
> };
>
> static void __init scan_features(unsigned long node, const unsigned char *ftrs,
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-07-20 03:43    [W:0.154 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site