lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] powerpc/powernv/idle: Exclude mfspr on HID1,4,5 on P9 and above
Excerpts from Pratik Rajesh Sampat's message of July 18, 2020 4:53 am:
> POWER9 onwards the support for the registers HID1, HID4, HID5 has been
> receded.
> Although mfspr on the above registers worked in Power9, In Power10
> simulator is unrecognized. Moving their assignment under the
> check for machines lower than Power9
>
> Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

> ---
> arch/powerpc/platforms/powernv/idle.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index d439e11af101..d24d6671f3e8 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
> */
> uint64_t lpcr_val = mfspr(SPRN_LPCR);
> uint64_t hid0_val = mfspr(SPRN_HID0);
> - uint64_t hid1_val = mfspr(SPRN_HID1);
> - uint64_t hid4_val = mfspr(SPRN_HID4);
> - uint64_t hid5_val = mfspr(SPRN_HID5);
> uint64_t hmeer_val = mfspr(SPRN_HMEER);
> uint64_t msr_val = MSR_IDLE;
> uint64_t psscr_val = pnv_deepest_stop_psscr_val;
> @@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
>
> /* Only p8 needs to set extra HID regiters */
> if (!pvr_version_is(PVR_POWER9)) {
> + uint64_t hid1_val = mfspr(SPRN_HID1);
> + uint64_t hid4_val = mfspr(SPRN_HID4);
> + uint64_t hid5_val = mfspr(SPRN_HID5);
>
> rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
> if (rc != 0)
> --
> 2.25.4
>
>

\
 
 \ /
  Last update: 2020-07-20 02:02    [W:0.064 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site