lkml.org 
[lkml]   [2020]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
----- On Jul 16, 2020, at 5:24 PM, Alan Stern stern@rowland.harvard.edu wrote:

> On Thu, Jul 16, 2020 at 02:58:41PM -0400, Mathieu Desnoyers wrote:
>> ----- On Jul 16, 2020, at 12:03 PM, Mathieu Desnoyers
>> mathieu.desnoyers@efficios.com wrote:
>>
>> > ----- On Jul 16, 2020, at 11:46 AM, Mathieu Desnoyers
>> > mathieu.desnoyers@efficios.com wrote:
>> >
>> >> ----- On Jul 16, 2020, at 12:42 AM, Nicholas Piggin npiggin@gmail.com wrote:
>> >>> I should be more complete here, especially since I was complaining
>> >>> about unclear barrier comment :)
>> >>>
>> >>>
>> >>> CPU0 CPU1
>> >>> a. user stuff 1. user stuff
>> >>> b. membarrier() 2. enter kernel
>> >>> c. smp_mb() 3. smp_mb__after_spinlock(); // in __schedule
>> >>> d. read rq->curr 4. rq->curr switched to kthread
>> >>> e. is kthread, skip IPI 5. switch_to kthread
>> >>> f. return to user 6. rq->curr switched to user thread
>> >>> g. user stuff 7. switch_to user thread
>> >>> 8. exit kernel
>> >>> 9. more user stuff
>> >>>
>> >>> What you're really ordering is a, g vs 1, 9 right?
>> >>>
>> >>> In other words, 9 must see a if it sees g, g must see 1 if it saw 9,
>> >>> etc.
>> >>>
>> >>> Userspace does not care where the barriers are exactly or what kernel
>> >>> memory accesses might be being ordered by them, so long as there is a
>> >>> mb somewhere between a and g, and 1 and 9. Right?
>> >>
>> >> This is correct.
>> >
>> > Actually, sorry, the above is not quite right. It's been a while
>> > since I looked into the details of membarrier.
>> >
>> > The smp_mb() at the beginning of membarrier() needs to be paired with a
>> > smp_mb() _after_ rq->curr is switched back to the user thread, so the
>> > memory barrier is between store to rq->curr and following user-space
>> > accesses.
>> >
>> > The smp_mb() at the end of membarrier() needs to be paired with the
>> > smp_mb__after_spinlock() at the beginning of schedule, which is
>> > between accesses to userspace memory and switching rq->curr to kthread.
>> >
>> > As to *why* this ordering is needed, I'd have to dig through additional
>> > scenarios from https://lwn.net/Articles/573436/. Or maybe Paul remembers ?
>>
>> Thinking further about this, I'm beginning to consider that maybe we have been
>> overly cautious by requiring memory barriers before and after store to rq->curr.
>>
>> If CPU0 observes a CPU1's rq->curr->mm which differs from its own process
>> (current)
>> while running the membarrier system call, it necessarily means that CPU1 had
>> to issue smp_mb__after_spinlock when entering the scheduler, between any
>> user-space
>> loads/stores and update of rq->curr.
>>
>> Requiring a memory barrier between update of rq->curr (back to current process's
>> thread) and following user-space memory accesses does not seem to guarantee
>> anything more than what the initial barrier at the beginning of __schedule
>> already
>> provides, because the guarantees are only about accesses to user-space memory.
>>
>> Therefore, with the memory barrier at the beginning of __schedule, just
>> observing that
>> CPU1's rq->curr differs from current should guarantee that a memory barrier was
>> issued
>> between any sequentially consistent instructions belonging to the current
>> process on
>> CPU1.
>>
>> Or am I missing/misremembering an important point here ?
>
> Is it correct to say that the switch_to operations in 5 and 7 include
> memory barriers? If they do, then skipping the IPI should be okay.
>
> The reason is as follows: The guarantee you need to enforce is that
> anything written by CPU0 before the membarrier() will be visible to CPU1
> after it returns to user mode. Let's say that a writes to X and 9
> reads from X.
>
> Then we have an instance of the Store Buffer pattern:
>
> CPU0 CPU1
> a. Write X 6. Write rq->curr for user thread
> c. smp_mb() 7. switch_to memory barrier
> d. Read rq->curr 9. Read X
>
> In this pattern, the memory barriers make it impossible for both reads
> to miss their corresponding writes. Since d does fail to read 6 (it
> sees the earlier value stored by 4), 9 must read a.
>
> The other guarantee you need is that g on CPU0 will observe anything
> written by CPU1 in 1. This is easier to see, using the fact that 3 is a
> memory barrier and d reads from 4.

Right, and Nick's reply involving pairs of loads/stores on each side
clarifies the situation even further.

Thanks,

Mathieu


--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com

\
 
 \ /
  Last update: 2020-07-17 15:40    [W:1.013 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site