lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3 v3] usb: typec: tcpm: Stay in BIST mode till hardreset or unattached
From
Date
On 7/15/20 8:41 PM, Badhri Jagan Sridharan wrote:
> Port starts to toggle when transitioning to unattached state.
> This is incorrect while in BIST mode.
>
> 6.4.3.1 BIST Carrier Mode
> Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object,
> the UUT Shall send out a continuous string of BMC encoded alternating "1"s
> and “0”s. The UUT Shall exit the Continuous BIST Mode within
> tBISTContMode of this Continuous BIST Mode being enabled(see
> Section 6.6.7.2).
>
> 6.4.3.2 BIST Test Data
> Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object,
> the UUT Shall return a GoodCRC Message and Shall enter a test mode in which
> it sends no further Messages except for GoodCRC Messages in response to
> received Messages. See Section 5.9.2 for the definition of the Test Data
> Frame. The test Shall be ended by sending Hard Reset Signaling to reset the
> UUT.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Version history:
> Changes since V1:
> - None
>
> Changes since V2:(Guenter's suggestions)
> - Fixed formatting error
> - Reduced timeout to 50ms
>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 7 +++++--
> include/linux/usb/pd.h | 1 +
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 379fcab9dbd973..38b958a9650104 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -3559,6 +3559,8 @@ static void run_state_machine(struct tcpm_port *port)
> switch (BDO_MODE_MASK(port->bist_request)) {
> case BDO_MODE_CARRIER2:
> tcpm_pd_transmit(port, TCPC_TX_BIST_MODE_2, NULL);
> + tcpm_set_state(port, unattached_state(port),
> + PD_T_BIST_CONT_MODE);
> break;
> case BDO_MODE_TESTDATA:
> if (port->tcpc->set_bist_data) {
> @@ -3569,8 +3571,6 @@ static void run_state_machine(struct tcpm_port *port)
> default:
> break;
> }
> - /* Always switch to unattached state */
> - tcpm_set_state(port, unattached_state(port), 0);
> break;
> case GET_STATUS_SEND:
> tcpm_pd_send_control(port, PD_CTRL_GET_STATUS);
> @@ -3960,6 +3960,9 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
> static void _tcpm_pd_hard_reset(struct tcpm_port *port)
> {
> tcpm_log_force(port, "Received hard reset");
> + if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data)
> + port->tcpc->set_bist_data(port->tcpc, false);
> +
> /*
> * If we keep receiving hard reset requests, executing the hard reset
> * must have failed. Revert to error recovery if that happens.
> diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
> index a665d7f211424d..b6c233e79bd457 100644
> --- a/include/linux/usb/pd.h
> +++ b/include/linux/usb/pd.h
> @@ -483,4 +483,5 @@ static inline unsigned int rdo_max_power(u32 rdo)
> #define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
> #define PD_N_HARD_RESET_COUNT 2
>
> +#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */
> #endif /* __LINUX_USB_PD_H */
>

\
 
 \ /
  Last update: 2020-07-16 06:18    [W:0.037 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site