lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 15/35] i2c/busses: Tidy Success/Failure checks
Date
Remove unnecessary check for 0.

Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
---
This patch depends on PATCH 15/35

drivers/i2c/busses/i2c-ali15x3.c | 5 ++---
drivers/i2c/busses/i2c-nforce2.c | 3 +--
drivers/i2c/busses/i2c-sis5595.c | 15 +++++----------
3 files changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 359ee3e0864a..c9e779cc184e 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -167,11 +167,10 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
if(force_addr) {
dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
ali15x3_smba);
- if (0 != pci_write_config_word(ALI15X3_dev,
- SMBBA,
+ if (pci_write_config_word(ALI15X3_dev, SMBBA,
ali15x3_smba))
goto error;
- if (0 != pci_read_config_word(ALI15X3_dev,
+ if (pci_read_config_word(ALI15X3_dev,
SMBBA, &a))
goto error;
if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 385f4f446f36..54d2985b7aaf 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -327,8 +327,7 @@ static int nforce2_probe_smb(struct pci_dev *dev, int bar, int alt_reg,
/* Older incarnations of the device used non-standard BARs */
u16 iobase;

- if (pci_read_config_word(dev, alt_reg, &iobase)
- != 0) {
+ if (pci_read_config_word(dev, alt_reg, &iobase)) {
dev_err(&dev->dev, "Error reading PCI config for %s\n",
name);
return -EIO;
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index fbe3ee31eae3..b016f48519d3 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -175,11 +175,9 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)

if (force_addr) {
dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
- if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
- != 0)
+ if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base))
goto error;
- if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
- != 0)
+ if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a))
goto error;
if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
/* doesn't work for some chips! */
@@ -188,16 +186,13 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
}
}

- if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
- != 0)
+ if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val))
goto error;
if ((val & 0x80) == 0) {
dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
- if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
- != 0)
+ if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80))
goto error;
- if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
- != 0)
+ if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val))
goto error;
if ((val & 0x80) == 0) {
/* doesn't work for some chips? */
--
2.18.2
\
 
 \ /
  Last update: 2020-07-13 15:23    [W:0.067 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site