lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 10/10] arm64: dts: actions: Add uSD support for Cubieboard7
Hi,

> But this regulator is only used for the eMMC there, which we apparently
> don't have on the Cubieboard 7?

We do have eMMC present on Cubieboard 7 (both the versions of Cubieboard7), and
the regulator name is similar to what is used in
"s900-bubblegum-96.dts" .i.e. "vcc_3v1".

But Since this patch doesn't enable eMMC, it does make sense to remove this
"vcc_3v1" regulator and keep the other one.

> > Also, another day tested it without having these regulators in , and
> > still it seems to
> > work. So should these be removed ?
>
> If there are not even referenced in the .dts, then fixed regulators are
> rather pointless. So yes, please remove this vcc-3v1 one.

Sure, I would do this.

> What is the story with the other regulator? Is there a PMIC or a power
> switch for the SD card? Or is the power supply actually hardwired?

SD_VCC is connected to SWITCH/LDO which gets input from ATM2603C PMIC.
This seems to be enabled by default ( in early bootloaders I guess).

Thanks
-Amit.

\
 
 \ /
  Last update: 2020-07-13 11:04    [W:0.096 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site