lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v2 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code
From
Date
On Sun, 2020-07-12 at 20:53 -0700, Florian Fainelli wrote:
>
> On 7/12/2020 8:30 PM, Chunfeng Yun wrote:
> > Use readl_poll_timeout() to poll register status
> >
> > Cc: Florian Fainelli <f.fainelli@gmail.com>
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v2 changes, suggested by Stephen:
> > 1. use unsigned int instead of int for @usec parameter
> > 2. add dev_log() back
> > 3. drop "Err" in error log
> > ---
> > drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
> > 1 file changed, 11 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
> > index 02a3a77..53dccb1 100644
> > --- a/drivers/usb/gadget/udc/bdc/bdc_core.c
> > +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
> > @@ -12,6 +12,7 @@
> > #include <linux/spinlock.h>
> > #include <linux/platform_device.h>
> > #include <linux/interrupt.h>
> > +#include <linux/iopoll.h>
> > #include <linux/ioport.h>
> > #include <linux/io.h>
> > #include <linux/list.h>
> > @@ -29,24 +30,19 @@
> > #include "bdc_dbg.h"
> >
> > /* Poll till controller status is not OIP */
> > -static int poll_oip(struct bdc *bdc, int usec)
> > +static int poll_oip(struct bdc *bdc, u32 usec)
> > {
> > u32 status;
> > - /* Poll till STS!= OIP */
> > - while (usec) {
> > - status = bdc_readl(bdc->regs, BDC_BDCSC);
> > - if (BDC_CSTS(status) != BDC_OIP) {
> > - dev_dbg(bdc->dev,
> > - "poll_oip complete status=%d",
> > - BDC_CSTS(status));
> > - return 0;
> > - }
> > - udelay(10);
> > - usec -= 10;
> > - }
> > - dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
> > + int ret;
> >
> > - return -ETIMEDOUT;
> > + ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
> > + (BDC_CSTS(status) != BDC_OIP), 10, usec);
>
> You could probably indent this to the opening parenthesis,
Done, v3 is sent out, thanks

> but with or
> without it:
>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>
> and thanks for picking up the MAINTAINERS file update ;)
>
> > + if (ret)
> > + dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
> > + else
> > + dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
> > +
> > + return ret;
> > }
> >
> > /* Stop the BDC controller */
> >
>

\
 
 \ /
  Last update: 2020-07-13 08:56    [W:0.573 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site