lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 1/6] dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings
On Thu, Jul 02, 2020 at 04:17:54PM +0200, Grzegorz Jaszczyk wrote:
> From: Suman Anna <s-anna@ti.com>
>
> The Programmable Real-Time Unit and Industrial Communication Subsystem
> (PRU-ICSS or simply PRUSS) contains an interrupt controller (INTC) that
> can handle various system input events and post interrupts back to the
> device-level initiators. The INTC can support upto 64 input events on
> most SoCs with individual control configuration and h/w prioritization.
> These events are mapped onto 10 output interrupt lines through two levels
> of many-to-one mapping support. Different interrupt lines are routed to
> the individual PRU cores or to the host CPU or to other PRUSS instances.
>
> The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP,
> commonly called ICSSG. The ICSSG interrupt controller on K3 SoCs provide
> a higher number of host interrupts (20 vs 10) and can handle an increased
> number of input events (160 vs 64) from various SoC interrupt sources.
>
> Add the bindings document for these interrupt controllers on all the
> applicable SoCs. It covers the OMAP architecture SoCs - AM33xx, AM437x
> and AM57xx; the Keystone 2 architecture based 66AK2G SoC; the Davinci
> architecture based OMAPL138 SoCs, and the K3 architecture based AM65x
> and J721E SoCs.
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> Reviewed-by: Lee Jones <lee.jones@linaro.org>
> ---
> v2->v3:
> - Convert dt-binding to YAML
> v1->v2:
> - https://patchwork.kernel.org/patch/11069767/
> ---
> .../interrupt-controller/ti,pruss-intc.yaml | 135 +++++++++++++++++++++
> 1 file changed, 135 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> new file mode 100644
> index 0000000..7fe4b95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI PRU-ICSS Local Interrupt Controller
> +
> +maintainers:
> + - Suman Anna <s-anna@ti.com>
> +
> +description: |
> + Each PRU-ICSS has a single interrupt controller instance that is common
> + to all the PRU cores. Most interrupt controllers can route 64 input events
> + which are then mapped to 10 possible output interrupts through two levels
> + of mapping. The input events can be triggered by either the PRUs and/or
> + various other PRUSS internal and external peripherals. The first 2 output
> + interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
> + remaining 8 (2 through 9) connected to external interrupt controllers
> + including the MPU and/or other PRUSS instances, DSPs or devices.
> +
> + The properties "ti,irqs-reserved" and "ti,irqs-shared" are used for denoting
> + the connection differences on the output interrupts 2 through 9. If neither
> + of these properties are defined, it implies that all the PRUSS INTC output
> + interrupts 2 through 9 (host_intr0 through host_intr7) are connected
> + exclusively to the Arm interrupt controller.
> +
> + The K3 family of SoCs can handle 160 input events that can be mapped to 20
> + different possible output interrupts. The additional output interrupts (10
> + through 19) are connected to new sub-modules within the ICSSG instances.
> +
> + This interrupt-controller node should be defined as a child node of the
> + corresponding PRUSS node. The node should be named "interrupt-controller".
> +
> +allOf:
> + - $ref: /schemas/interrupt-controller.yaml#
> + - $ref: /schemas/interrupts.yaml#

Drop these. They already get applied.

> +
> +properties:
> + compatible:
> + enum:
> + - ti,pruss-intc
> + - ti,icssg-intc
> + description: |
> + Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
> + AM335x family of SoCs,
> + AM437x family of SoCs,
> + AM57xx family of SoCs
> + 66AK2G family of SoCs

I guess you can look at the parent if there's differences in features
and bugs.

> + Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs
> +
> + reg:
> + items:
> + - description: base address and size for the PRUSS INTC sub-module

Just: maxItems: 1

Don't need genericish descriptions.

> +
> + interrupts:
> + minItems: 1
> + maxItems: 8
> + description: |
> + all the interrupts generated towards the main host processor in the SoC.

> + The format depends on the interrupt specifier for the particular SoC's
> + Arm parent interrupt controller. A shared interrupt can be skipped if

That's true for all 'interrupts' properties, so not needed here.

> + the desired destination and usage is by a different processor/device.
> +
> + interrupt-names:
> + minItems: 1
> + maxItems: 8
> + items:
> + pattern: host_intr[0-7]

'intr' is redundant.

So we could have?: host0, host3, host4

> + description: |
> + should use one of the above names for each valid host event interrupt
> + connected to Arm interrupt controller, the name should match the
> + corresponding host event interrupt number
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 1
> + description: |
> + Client users shall use the PRU System event number (the interrupt source
> + that the client is interested in) as the value of the interrupts property
> + in their node
> +
> + ti,irqs-reserved:
> + $ref: /schemas/types.yaml#definitions/uint8-array
> + description: |
> + an array of 8-bit elements of host interrupts between 0 and 7
> + (corresponding to PRUSS INTC output interrupts 2 through 9) that are
> + not connected to the Arm interrupt controller.
> + Eg: AM437x and 66AK2G SoCs do not have "host_intr5" interrupt connected
> + to MPU

Seems redundant with interrupt-names.

> +
> + ti,irqs-shared:
> + $ref: /schemas/types.yaml#definitions/uint8-array
> + description: |
> + an array of 8-bit elements of host interrupts between 0 and 7
> + (corresponding to PRUSS INTC output interrupts 2 through 9) that are
> + also connected to other devices or processors in the SoC.
> + Eg: AM65x and J721E SoCs have "host_intr5", "host_intr6" and
> + "host_intr7" interrupts connected to MPU, and other ICSSG
> + instances

Wouldn't a bit mask work for both of these?

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + /* AM33xx PRU-ICSS */
> + pruss: pruss@0 {
> + compatible = "ti,am3356-pruss";
> + reg = <0x0 0x80000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + pruss_intc: interrupt-controller@20000 {
> + compatible = "ti,pruss-intc";
> + reg = <0x20000 0x2000>;
> + interrupts = <20 21 22 23 24 25 26 27>;
> + interrupt-names = "host_intr0", "host_intr1",
> + "host_intr2", "host_intr3",
> + "host_intr4", "host_intr5",
> + "host_intr6", "host_intr7";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + ti,irqs-shared = /bits/ 8 <0 6 7>;
> + };
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-07-13 23:26    [W:0.255 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site