lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/4] PCI: Move pci_enable_acs() and its dependencies up in pci.c
On Tue, Jul 07, 2020 at 03:46:01PM -0700, Rajat Jain wrote:
> Move pci_enable_acs() and the functions it depends on, further up in the
> source code to avoid having to forward declare it when we make it static
> in near future (next patch).
>
> No functional changes intended.
>
> Signed-off-by: Rajat Jain <rajatja@google.com>

Applied patches 1-3 to pci/enumeration for v5.9, thanks!

I held off on patch 4 (enabling PCI_ACS_TB) until we have a little
more conversation on the impact of it.

> ---
> v4: Same as v3
> v3: Initial version of the patch, created per Bjorn's suggestion
>
> drivers/pci/pci.c | 254 +++++++++++++++++++++++-----------------------
> 1 file changed, 127 insertions(+), 127 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ce096272f52b1..eec625f0e594e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -777,6 +777,133 @@ int pci_wait_for_pending(struct pci_dev *dev, int pos, u16 mask)
> return 0;
> }
>
> +static int pci_acs_enable;
> +
> +/**
> + * pci_request_acs - ask for ACS to be enabled if supported
> + */
> +void pci_request_acs(void)
> +{
> + pci_acs_enable = 1;
> +}
> +
> +static const char *disable_acs_redir_param;
> +
> +/**
> + * pci_disable_acs_redir - disable ACS redirect capabilities
> + * @dev: the PCI device
> + *
> + * For only devices specified in the disable_acs_redir parameter.
> + */
> +static void pci_disable_acs_redir(struct pci_dev *dev)
> +{
> + int ret = 0;
> + const char *p;
> + int pos;
> + u16 ctrl;
> +
> + if (!disable_acs_redir_param)
> + return;
> +
> + p = disable_acs_redir_param;
> + while (*p) {
> + ret = pci_dev_str_match(dev, p, &p);
> + if (ret < 0) {
> + pr_info_once("PCI: Can't parse disable_acs_redir parameter: %s\n",
> + disable_acs_redir_param);
> +
> + break;
> + } else if (ret == 1) {
> + /* Found a match */
> + break;
> + }
> +
> + if (*p != ';' && *p != ',') {
> + /* End of param or invalid format */
> + break;
> + }
> + p++;
> + }
> +
> + if (ret != 1)
> + return;
> +
> + if (!pci_dev_specific_disable_acs_redir(dev))
> + return;
> +
> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
> + if (!pos) {
> + pci_warn(dev, "cannot disable ACS redirect for this hardware as it does not have ACS capabilities\n");
> + return;
> + }
> +
> + pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
> +
> + /* P2P Request & Completion Redirect */
> + ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
> +
> + pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
> +
> + pci_info(dev, "disabled ACS redirect\n");
> +}
> +
> +/**
> + * pci_std_enable_acs - enable ACS on devices using standard ACS capabilities
> + * @dev: the PCI device
> + */
> +static void pci_std_enable_acs(struct pci_dev *dev)
> +{
> + int pos;
> + u16 cap;
> + u16 ctrl;
> +
> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
> + if (!pos)
> + return;
> +
> + pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
> + pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
> +
> + /* Source Validation */
> + ctrl |= (cap & PCI_ACS_SV);
> +
> + /* P2P Request Redirect */
> + ctrl |= (cap & PCI_ACS_RR);
> +
> + /* P2P Completion Redirect */
> + ctrl |= (cap & PCI_ACS_CR);
> +
> + /* Upstream Forwarding */
> + ctrl |= (cap & PCI_ACS_UF);
> +
> + pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
> +}
> +
> +/**
> + * pci_enable_acs - enable ACS if hardware support it
> + * @dev: the PCI device
> + */
> +void pci_enable_acs(struct pci_dev *dev)
> +{
> + if (!pci_acs_enable)
> + goto disable_acs_redir;
> +
> + if (!pci_dev_specific_enable_acs(dev))
> + goto disable_acs_redir;
> +
> + pci_std_enable_acs(dev);
> +
> +disable_acs_redir:
> + /*
> + * Note: pci_disable_acs_redir() must be called even if ACS was not
> + * enabled by the kernel because it may have been enabled by
> + * platform firmware. So if we are told to disable it, we should
> + * always disable it after setting the kernel's default
> + * preferences.
> + */
> + pci_disable_acs_redir(dev);
> +}
> +
> /**
> * pci_restore_bars - restore a device's BAR values (e.g. after wake-up)
> * @dev: PCI device to have its BARs restored
> @@ -3230,133 +3357,6 @@ void pci_configure_ari(struct pci_dev *dev)
> }
> }
>
> -static int pci_acs_enable;
> -
> -/**
> - * pci_request_acs - ask for ACS to be enabled if supported
> - */
> -void pci_request_acs(void)
> -{
> - pci_acs_enable = 1;
> -}
> -
> -static const char *disable_acs_redir_param;
> -
> -/**
> - * pci_disable_acs_redir - disable ACS redirect capabilities
> - * @dev: the PCI device
> - *
> - * For only devices specified in the disable_acs_redir parameter.
> - */
> -static void pci_disable_acs_redir(struct pci_dev *dev)
> -{
> - int ret = 0;
> - const char *p;
> - int pos;
> - u16 ctrl;
> -
> - if (!disable_acs_redir_param)
> - return;
> -
> - p = disable_acs_redir_param;
> - while (*p) {
> - ret = pci_dev_str_match(dev, p, &p);
> - if (ret < 0) {
> - pr_info_once("PCI: Can't parse disable_acs_redir parameter: %s\n",
> - disable_acs_redir_param);
> -
> - break;
> - } else if (ret == 1) {
> - /* Found a match */
> - break;
> - }
> -
> - if (*p != ';' && *p != ',') {
> - /* End of param or invalid format */
> - break;
> - }
> - p++;
> - }
> -
> - if (ret != 1)
> - return;
> -
> - if (!pci_dev_specific_disable_acs_redir(dev))
> - return;
> -
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
> - if (!pos) {
> - pci_warn(dev, "cannot disable ACS redirect for this hardware as it does not have ACS capabilities\n");
> - return;
> - }
> -
> - pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
> -
> - /* P2P Request & Completion Redirect */
> - ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
> -
> - pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
> -
> - pci_info(dev, "disabled ACS redirect\n");
> -}
> -
> -/**
> - * pci_std_enable_acs - enable ACS on devices using standard ACS capabilities
> - * @dev: the PCI device
> - */
> -static void pci_std_enable_acs(struct pci_dev *dev)
> -{
> - int pos;
> - u16 cap;
> - u16 ctrl;
> -
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
> - if (!pos)
> - return;
> -
> - pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
> - pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
> -
> - /* Source Validation */
> - ctrl |= (cap & PCI_ACS_SV);
> -
> - /* P2P Request Redirect */
> - ctrl |= (cap & PCI_ACS_RR);
> -
> - /* P2P Completion Redirect */
> - ctrl |= (cap & PCI_ACS_CR);
> -
> - /* Upstream Forwarding */
> - ctrl |= (cap & PCI_ACS_UF);
> -
> - pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
> -}
> -
> -/**
> - * pci_enable_acs - enable ACS if hardware support it
> - * @dev: the PCI device
> - */
> -void pci_enable_acs(struct pci_dev *dev)
> -{
> - if (!pci_acs_enable)
> - goto disable_acs_redir;
> -
> - if (!pci_dev_specific_enable_acs(dev))
> - goto disable_acs_redir;
> -
> - pci_std_enable_acs(dev);
> -
> -disable_acs_redir:
> - /*
> - * Note: pci_disable_acs_redir() must be called even if ACS was not
> - * enabled by the kernel because it may have been enabled by
> - * platform firmware. So if we are told to disable it, we should
> - * always disable it after setting the kernel's default
> - * preferences.
> - */
> - pci_disable_acs_redir(dev);
> -}
> -
> static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags)
> {
> int pos;
> --
> 2.27.0.212.ge8ba1cc988-goog
>

\
 
 \ /
  Last update: 2020-07-10 22:39    [W:0.055 / U:3.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site