lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH next 1/6] dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Date
Convert the K3 NavigatorSS Ring Accelerator bindings documentation to
json-schema.

Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
.../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 ----------
.../bindings/soc/ti/k3-ringacc.yaml | 102 ++++++++++++++++++
2 files changed, 102 insertions(+), 59 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml

diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
deleted file mode 100644
index 59758ccce809..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Texas Instruments K3 NavigatorSS Ring Accelerator
-
-The Ring Accelerator (RA) is a machine which converts read/write accesses
-from/to a constant address into corresponding read/write accesses from/to a
-circular data structure in memory. The RA eliminates the need for each DMA
-controller which needs to access ring elements from having to know the current
-state of the ring (base address, current offset). The DMA controller
-performs a read or write access to a specific address range (which maps to the
-source interface on the RA) and the RA replaces the address for the transaction
-with a new address which corresponds to the head or tail element of the ring
-(head for reads, tail for writes).
-
-The Ring Accelerator is a hardware module that is responsible for accelerating
-management of the packet queues. The K3 SoCs can have more than one RA instances
-
-Required properties:
-- compatible : Must be "ti,am654-navss-ringacc";
-- reg : Should contain register location and length of the following
- named register regions.
-- reg-names : should be
- "rt" - The RA Ring Real-time Control/Status Registers
- "fifos" - The RA Queues Registers
- "proxy_gcfg" - The RA Proxy Global Config Registers
- "proxy_target" - The RA Proxy Datapath Registers
-- ti,num-rings : Number of rings supported by RA
-- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
-- ti,sci : phandle on TI-SCI compatible System controller node
-- ti,sci-dev-id : TI-SCI device id of the ring accelerator
-- msi-parent : phandle for "ti,sci-inta" interrupt controller
-
-Optional properties:
- -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
- issue software w/a
-
-Example:
-
-ringacc: ringacc@3c000000 {
- compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x3c000000 0x0 0x400000>,
- <0x0 0x38000000 0x0 0x400000>,
- <0x0 0x31120000 0x0 0x100>,
- <0x0 0x33000000 0x0 0x40000>;
- reg-names = "rt", "fifos",
- "proxy_gcfg", "proxy_target";
- ti,num-rings = <818>;
- ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
- ti,dma-ring-reset-quirk;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <187>;
- msi-parent = <&inta_main_udmass>;
-};
-
-client:
-
-dma_ipx: dma_ipx@<addr> {
- ...
- ti,ringacc = <&ringacc>;
- ...
-}
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
new file mode 100644
index 000000000000..ae33fc957141
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments K3 NavigatorSS Ring Accelerator
+
+maintainers:
+ - Santosh Shilimkar <ssantosh@kernel.org>
+ - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+ The Ring Accelerator (RA) is a machine which converts read/write accesses
+ from/to a constant address into corresponding read/write accesses from/to a
+ circular data structure in memory. The RA eliminates the need for each DMA
+ controller which needs to access ring elements from having to know the current
+ state of the ring (base address, current offset). The DMA controller
+ performs a read or write access to a specific address range (which maps to the
+ source interface on the RA) and the RA replaces the address for the transaction
+ with a new address which corresponds to the head or tail element of the ring
+ (head for reads, tail for writes).
+
+ The Ring Accelerator is a hardware module that is responsible for accelerating
+ management of the packet queues. The K3 SoCs can have more than one RA instances
+
+properties:
+ compatible:
+ items:
+ - const: ti,am654-navss-ringacc
+
+ reg:
+ items:
+ - description: real time registers regions
+ - description: fifos registers regions
+ - description: proxy gcfg registers regions
+ - description: proxy target registers regions
+
+ reg-names:
+ items:
+ - const: rt
+ - const: fifos
+ - const: proxy_gcfg
+ - const: proxy_target
+
+ msi-parent: true
+
+ ti,num-rings:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of rings supported by RA
+
+ ti,sci-rm-range-gp-rings:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TI-SCI RM subtype for GP ring range
+
+ ti,sci:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description: phandle on TI-SCI compatible System controller node
+
+ ti,sci-dev-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TI-SCI device id of the ring accelerator
+
+ ti,dma-ring-reset-quirk:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: |
+ enable ringacc/udma ring state interoperability issue software w/a
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - msi-parent
+ - ti,num-rings
+ - ti,sci-rm-range-gp-rings
+ - ti,sci
+ - ti,sci-dev-id
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <818>;
+ ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,dma-ring-reset-quirk;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <187>;
+ msi-parent = <&inta_main_udmass>;
+ };
+ };
--
2.17.1
\
 
 \ /
  Last update: 2020-07-01 12:31    [W:0.111 / U:2.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site