lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/6] powerpc/pseries/iommu: Update call to ibm,query-pe-dma-windows
From
Date


On 24/06/2020 16:24, Leonardo Bras wrote:
> From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
> outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
>
> This change of output size is meant to expand the address size of
> largest_available_block PE TCE from 32-bit to 64-bit, which ends up
> shifting page_size and migration_capable.
>
> This ends up requiring the update of
> ddw_query_response->largest_available_block from u32 to u64, and manually
> assigning the values from the buffer into this struct, according to
> output size.
>
> Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
> ---
> arch/powerpc/platforms/pseries/iommu.c | 57 +++++++++++++++++++++-----
> 1 file changed, 47 insertions(+), 10 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
> index 68d2aa9c71a8..558e5441c355 100644
> --- a/arch/powerpc/platforms/pseries/iommu.c
> +++ b/arch/powerpc/platforms/pseries/iommu.c
> @@ -44,6 +44,10 @@
> #define DDW_REMOVE_PE_DMA_WIN 2
> #define DDW_APPLICABLE_SIZE 3
>
> +#define DDW_EXT_SIZE 0
> +#define DDW_EXT_RESET_DMA_WIN 1
> +#define DDW_EXT_QUERY_OUT_SIZE 2


#define DDW_EXT_LAST (DDW_EXT_QUERY_OUT_SIZE + 1)
...


> +
> static struct iommu_table_group *iommu_pseries_alloc_group(int node)
> {
> struct iommu_table_group *table_group;
> @@ -339,7 +343,7 @@ struct direct_window {
> /* Dynamic DMA Window support */
> struct ddw_query_response {
> u32 windows_available;
> - u32 largest_available_block;
> + u64 largest_available_block;
> u32 page_size;
> u32 migration_capable;
> };
> @@ -875,13 +879,29 @@ static int find_existing_ddw_windows(void)
> machine_arch_initcall(pseries, find_existing_ddw_windows);
>
> static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
> - struct ddw_query_response *query)
> + struct ddw_query_response *query,
> + struct device_node *parent)
> {
> struct device_node *dn;
> struct pci_dn *pdn;
> - u32 cfg_addr;
> + u32 cfg_addr, query_out[5], ddw_ext[DDW_EXT_QUERY_OUT_SIZE + 1];


... and use DDW_EXT_LAST here.


> u64 buid;
> - int ret;
> + int ret, out_sz;
> +
> + /*
> + * From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many
> + * output parameters ibm,query-pe-dma-windows will have, ranging from
> + * 5 to 6.
> + */
> +
> + ret = of_property_read_u32_array(parent, "ibm,ddw-extensions",
> + &ddw_ext[0],
> + DDW_EXT_QUERY_OUT_SIZE + 1);
> + if (ret && ddw_ext[DDW_EXT_SIZE] > 1 &&

>= DDW_EXT_QUERY_OUT_SIZE ? Thanks,


> + ddw_ext[DDW_EXT_QUERY_OUT_SIZE] == 1)
> + out_sz = 6;
> + else
> + out_sz = 5;
>
> /*
> * Get the config address and phb buid of the PE window.
> @@ -894,11 +914,28 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
> buid = pdn->phb->buid;
> cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
>
> - ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, 5, (u32 *)query,
> + ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, out_sz, query_out,
> cfg_addr, BUID_HI(buid), BUID_LO(buid));
> - dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
> - " returned %d\n", ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr,
> - BUID_HI(buid), BUID_LO(buid), ret);
> + dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d\n",
> + ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
> + BUID_LO(buid), ret);
> +
> + switch (out_sz) {
> + case 5:
> + query->windows_available = query_out[0];
> + query->largest_available_block = query_out[1];
> + query->page_size = query_out[2];
> + query->migration_capable = query_out[3];
> + break;
> + case 6:
> + query->windows_available = query_out[0];
> + query->largest_available_block = ((u64)query_out[1] << 32) |
> + query_out[2];
> + query->page_size = query_out[3];
> + query->migration_capable = query_out[4];
> + break;
> + }
> +
> return ret;
> }
>
> @@ -1046,7 +1083,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
> * of page sizes: supported and supported for migrate-dma.
> */
> dn = pci_device_to_OF_node(dev);
> - ret = query_ddw(dev, ddw_avail, &query);
> + ret = query_ddw(dev, ddw_avail, &query, pdn);
> if (ret != 0)
> goto out_failed;
>
> @@ -1074,7 +1111,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
> /* check largest block * page size > max memory hotplug addr */
> max_addr = ddw_memory_hotplug_max();
> if (query.largest_available_block < (max_addr >> page_shift)) {
> - dev_dbg(&dev->dev, "can't map partition max 0x%llx with %u "
> + dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu "
> "%llu-sized pages\n", max_addr, query.largest_available_block,
> 1ULL << page_shift);
> goto out_failed;
>

--
Alexey

\
 
 \ /
  Last update: 2020-07-01 10:18    [W:1.042 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site