lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 03/11] arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-common-rev2.dtsi file
Hi Geert,

Thank you for the review.

On Mon, Jun 8, 2020 at 3:27 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> Thanks for your patch!
>
> On Sun, Jun 7, 2020 at 8:41 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Separate out Rev.2.0 specific hardware changes into
> > hihope-common-rev2.dtsi file so that hihope-common.dtsi can be used
> > by all the variants for RZ/G2M[N] boards.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/hihope-common-rev2.dtsi
> > @@ -0,0 +1,101 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
> > + * parts
> > + *
> > + * Copyright (C) 2020 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
>
> What about adding
>
> #include "hihope-common.dtsi"
>
> here?
> Then the *rev2.dts files have to include only "hihope-common-rev2.dtsi",
> and get "hihope-common.dtsi" for free?
>
> The same is true for the rev4.dtsi and the rev4.dts files.
>
Agreed.

Cheers,
--Prabhakar

> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds

\
 
 \ /
  Last update: 2020-06-08 16:52    [W:0.084 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site